The LM3410 and LM3410-Q1 constant current LED driver are a monolithic, high frequency, PWM DC-DC converter, available in 6-pin WSON, 8-pin MSOP-PowerPad™, and 5-pin SOT-23 packages. With a minimum of external components the LM3410 and LM3410-Q1 are easy to use. It can drive 2.8-A (typical) peak currents with an internal 170-mΩ NMOS switch. Switching frequency is internally set to either 525 kHz or 1.6 MHz, allowing the use of extremely small surface mount inductors and chip capacitors. Even though the operating frequency is high, efficiencies up to 88% are easy to achieve. External shutdown is included, featuring an ultra-low standby current of 80 nA. The LM3410 and LM3410-Q1 use current-mode control and internal compensation to provide high-performance over a wide range of operating conditions. Additional features include PWM dimming, cycle-by-cycle current limit, and thermal shutdown.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | LM3410, LM3410-Q1 525-kHz and 1.6-MHz, Constant-Current Boost and SEPIC LED Driver With Internal Compensation datasheet (Rev. H) | PDF | HTML | 31 ago 2016 |
| Selection guide | Power Management Guide 2018 (Rev. R) | 25 jun 2018 | ||
| Application note | AN-1656 Design Challenges of Switching LED Drivers (Rev. A) | 03 may 2013 | ||
| EVM User's guide | AN-1773 LM3410X LED Driver 5-Pin SOT-23 Demo Board (Rev. A) | 01 may 2013 | ||
| EVM User's guide | AN-1774 LM3410X LED Driver 6-Pin LLP Demo Board (Rev. B) | 01 may 2013 | ||
| EVM User's guide | AN-1775 LM3410X SEPIC 6-Pin LLP Demo Board (Rev. C) | 01 may 2013 | ||
| EVM User's guide | AN-1996 LM3410X 190mA, LED Driver 6-Pin LLP Evaluation Board (Rev. A) | 01 may 2013 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
This evaluation board showcases the LM3410X as a boost LED driver. It is designed to drive four, on-board LEDs (VOUT = 11.4V) in series at an average LED current (ILED) of 190mA. The circuit can accept an input voltage of 3.3V-5.5V. The switching frequency of the LM3410X converter is 1.6MHz (...)
The Evaluation Board included in this shipment converts 2.7V to 5.5V input, and illuminates four 50mA LEDs in series using the LM3410X 1.6MHz LED driver switching converter.
The demo board included in this shipment converts 2.7V to 5.5V input, and illuminates a 320 mA HB/OLED using the LM3410X 1.6MHz LED driver switching converter. This is a 2-layer board using the bottom layer as a Ground plane.
The above restrictions for the input voltage are valid only for the demo (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| HVSSOP (DGN) | 8 | Ultra Librarian |
| SOT-23 (DBV) | 5 | Ultra Librarian |
| WSON (NGG) | 6 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.