Line Drivers and Receivers for Signaling Rates(1) Up to 200 Mbps(1) The signaling rate of a line, is the number of voltage transitions that are made per second expressed in the units bps (bits per second).
The SN65MLVD201, 203, 206, and 207 are multipoint-low-voltage differential (M-LVDS) line drivers and receivers, which are optimized to operate at signaling rates up to 200 Mbps. All parts comply with the multipoint low-voltage differential signaling (M-LVDS) standard TIA/EIA-899. These circuits are similar to their TIA/EIA-644 standard compliant LVDS counterparts, with added features to address multipoint applications. The driver output has been designed to support multipoint buses presenting loads as low as 30 , and incorporates controlled transition times to allow for stubs off of the backbone transmission line.
These devices have Type-1 and Type-2 receivers that detect the bus state with as little as 50 mV of differential input voltage over a common-mode voltage range of –1 V to 3.4 V. The Type-1 receivers exhibit 25 mV of differential input voltage hysteresis to prevent output oscillations with slowly changing signals or loss of input. Type-2 receivers include an offset threshold to provide a known output state under open-circuit, idle-bus, and other faults conditions. The devices are characterized for operation from –40°C to 85°C.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | Multipoint-LVDS Line Driver and Receiver datasheet (Rev. C) | 07 ene 2008 | |
| Application brief | How Far, How Fast Can You Operate MLVDS? | 06 ago 2018 | ||
| Application note | Introduction to M-LVDS (TIA/EIA-899) (Rev. A) | 03 ene 2013 | ||
| User guide | Multipoint-Low Voltage Differential Signaling (M-LVDS) EVM (Rev. B) | 05 abr 2004 | ||
| Application note | M-LVDS Signaling Rate Versus Distance | 09 abr 2003 | ||
| Application note | Interoperability of M-LVDS and BusLVDS | 06 feb 2003 | ||
| User guide | 200 Mbps Multipoint-Low Voltage Differential Signaling (M-LVDS) EVM (Rev. A) | 20 dic 2002 | ||
| Application note | Wired-Logic Signaling with M-LVDS | 31 oct 2002 | ||
| User guide | Multipoint-Low Voltage Differential Signaling (M-LVDS) Evaluation Module | 04 mar 2002 | ||
| Application note | TIA/EIA-485 and M-LVDS, Power and Speed Comparison | 20 feb 2002 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The SN65MLVD2 and SN65MLVD3 are single-channel M-LVDS receivers. These devices are designed in full compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to250 Mbps. Each receiver channel is controlled by a receive enable (/RE). When /RE = low, (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.