SN75LBC175

Name: SN75LBC175
Brand: TI
SKU: SN75LBC175
Price: 2.534 USD

ACTIVO

Receptor de línea diferencial cuádruple de baja potencia

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat SN65LBC175, SN75LBC175 Quadruple Low-Power Differential Line Receivers datasheet (Rev. H) (Inglés) PDF | HTML

SN75LBC175

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

20000

Rating

Catalog

Operating temperature range (°C)

0 to 70

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

20000

Rating

Catalog

Operating temperature range (°C)

0 to 70

PDIP (N)

16

181.42 mm² 19.3 x 9.4

Meets or exceeds the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT recommendation V.11
Designed to operate with pulse durations as short as 20 ns
Designed for multipoint transmission on long bus lines in noisy environments
Input sensitivity: ±200 mV
Low-power consumption: 20 mA maximum
Open-circuit fail-safe design
Common-mode input voltage range of −7 V to 12 V
Pin compatible with SN75175 and LTC489

Meets or exceeds the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT recommendation V.11
Designed to operate with pulse durations as short as 20 ns
Designed for multipoint transmission on long bus lines in noisy environments
Input sensitivity: ±200 mV
Low-power consumption: 20 mA maximum
Open-circuit fail-safe design
Common-mode input voltage range of −7 V to 12 V
Pin compatible with SN75175 and LTC489

The SN65LBC175 and SN75LBC175 are monolithic, quadruple, differential line receivers with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11. The devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs, with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ±200 mV over a common-mode input voltage range of 12 V to −7 V. The fail-safe design ensures that when the inputs are open-circuited, the outputs are always high. Both devices are designed using the TI proprietary LinBiCMOS™ technology allowing low power consumption, high switching speeds, and robustness.

These devices offer optimum performance when used with the SN75LBC172 or SN75LBC174 quadruple line drivers. The SN65LBC175 is available in the 16-pin DIP (N), small-outline package (D), and the wide small-outline package (DW). The SN75LBC175 is available in the 16-pin DIP (N) and the small-outline package (D).

The SN65LBC175 is characterized over the industrial temperature range of −40°C to 85°C. The SN75LBC175 is characterized for operation over the commercial temperature range of 0°C to 70°C.

The SN65LBC175 and SN75LBC175 are monolithic, quadruple, differential line receivers with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11. The devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs, with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ±200 mV over a common-mode input voltage range of 12 V to −7 V. The fail-safe design ensures that when the inputs are open-circuited, the outputs are always high. Both devices are designed using the TI proprietary LinBiCMOS™ technology allowing low power consumption, high switching speeds, and robustness.

These devices offer optimum performance when used with the SN75LBC172 or SN75LBC174 quadruple line drivers. The SN65LBC175 is available in the 16-pin DIP (N), small-outline package (D), and the wide small-outline package (DW). The SN75LBC175 is available in the 16-pin DIP (N) and the small-outline package (D).

The SN65LBC175 is characterized over the industrial temperature range of −40°C to 85°C. The SN75LBC175 is characterized for operation over the commercial temperature range of 0°C to 70°C.

filter

Buscar otro/a Transceptores RS-485 y RS-422

Descargar