Inicio Gestión de la energía Controladores CA/CC y CC/CC (FET externo)

UCC28700-Q1

ACTIVO

Controlador PWM de regulación de lado primario compacto y calidad automotriz

Detalles del producto

Operating temperature range (°C) -40 to 125 Control mode Primary-side regulation Topology Buck, Flyback Rating Automotive Features Automotive qualified, DCM, Error amplifier, Green mode, Input line monitor, Leading edge blanking, Light load efficiency, Low power, Overcurrent protection, PSR, Primary-side regulated, Quasi-Resonant, Soft start, current limiting Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
Operating temperature range (°C) -40 to 125 Control mode Primary-side regulation Topology Buck, Flyback Rating Automotive Features Automotive qualified, DCM, Error amplifier, Green mode, Input line monitor, Leading edge blanking, Light load efficiency, Low power, Overcurrent protection, PSR, Primary-side regulated, Quasi-Resonant, Soft start, current limiting Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
    • Device HBM Classification Level 2: ±2 kV
    • Device CDM Classification Level C4B: 750 V
  • Functional Safety-Capable
  • < 30-mW Standby Power Consumption
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency
  • Quasi-Resonant Valley-Switching Operation for Highest Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and Overcurrent
  • Programmable Cable Compensation
  • SOT23-6 Package
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
    • Device HBM Classification Level 2: ±2 kV
    • Device CDM Classification Level C4B: 750 V
  • Functional Safety-Capable
  • < 30-mW Standby Power Consumption
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency
  • Quasi-Resonant Valley-Switching Operation for Highest Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and Overcurrent
  • Programmable Cable Compensation
  • SOT23-6 Package

The UCC28700-Q1 of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700-Q1 allows operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700-Q1 allows the level of cable compensation to be programmed.

The UCC28700-Q1 of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700-Q1 allows operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700-Q1 allows the level of cable compensation to be programmed.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
UCC28700 ACTIVO PWM de tensión y corriente constantes con PSR y compensación de cable programable This is the non-automotive variant

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Tipo Título Fecha
* Data sheet UCC28700-Q1 Constant-Voltage, Constant-Current Controller With Primary-Side Regulation datasheet (Rev. A) PDF | HTML 08 dic 2020
White paper Isolated Bias Power Supply Architecture for HEV and EV Traction Inverters PDF | HTML 11 oct 2023
Application brief Designing a Robust Traction Inverter Redundant Power Supply From 800 V Battery (Rev. C) PDF | HTML 16 feb 2023
Functional safety information UCC28700-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 18 ago 2020
Application note Minimize Standby Consumption for UCC287XX Family 01 ago 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Technical article Hybrid electric vehicles and electric vehicles need different isolated DC/DCs to w PDF | HTML 27 dic 2017
Application note Troubleshooting TI PSR controllers 03 oct 2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

UCC28700EVM-068 — Módulo de evaluación UCC28700

The Texas Instruments UCC28700EVM-068 evaluation module (EVM) helps designers evaluate the performance of the UCC28700 Constant-Voltage, Constant-Current PWM with Primary-Side Regulation. The 5W EVM is used for evaluating an off line adapter for USB applications. It converts a 90V to 265V RMS (...)
Guía del usuario: PDF
Modelo de simulación

UCC2870x PSPICE Transient Model

SLUM455.ZIP (131 KB) - PSpice Model
Modelo de simulación

UCC2870x TINA-TI Transient Reference Design

SLUM619.TSC (195 KB) - TINA-TI Reference Design
Modelo de simulación

UCC2870x TINA-TI Transient Spice Model

SLUM617.ZIP (101 KB) - TINA-TI Spice Model
Herramienta de cálculo

SLUC381 MathCAD Design Tool

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Controladores CA/CC y CC/CC (FET externo)
UCC28700 PWM de tensión y corriente constantes con PSR y compensación de cable programable UCC28700-Q1 Controlador PWM de regulación de lado primario compacto y calidad automotriz UCC28701 PWM de tensión y corriente constantes con PSR, opción NTC y compensación de cable de 0 mV UCC28702 PWM de tensión y corriente constantes con PSR, opción NTC y compensación de cable de 150 mV UCC28703 PWM de tensión y corriente constantes con PSR, opción NTC y compensación de cable de 300 mV
Herramienta de cálculo

SLUC408 UCC28700 Excel 97 Design Tool

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Controladores CA/CC y CC/CC (FET externo)
UCC28700 PWM de tensión y corriente constantes con PSR y compensación de cable programable UCC28700-Q1 Controlador PWM de regulación de lado primario compacto y calidad automotriz UCC28701 PWM de tensión y corriente constantes con PSR, opción NTC y compensación de cable de 0 mV UCC28702 PWM de tensión y corriente constantes con PSR, opción NTC y compensación de cable de 150 mV UCC28703 PWM de tensión y corriente constantes con PSR, opción NTC y compensación de cable de 300 mV
Diseños de referencia

TIDA-01604 — Diseño de referencia PFC de polo tótem de 6.6 kW, con una eficiencia del 98.6 % para cargador integr

This reference design functions from a base of silicon carbide (SiC) MOSFETs that are driven by a C2000 microcontroller (MCU) with SiC-isolated gate drivers. The design implements three-phase interleaving and operates in continuous conduction mode (CCM) to achieve a 98.46% efficiency at a 240-V (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

PMP20583 — Diseño de referencia de convertidor Flyback regulado en el lado primario para la monitorización de b

PMP20583 is a primary-side regulated flyback reference design which provides a ground referenced 5V output and an isolated 5V output at up to 80mA each from an input voltage of 37V to 125V. This design uses the UCC28700-Q1 flyback controller for constant voltage and constant current control of the (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP10739 — Diseño de referencia de convertidor buck no sincronizado de 90 a 110 Vin 12 Vout a 0,3 A

PMP10739 is a 3.6W buck converter using the UCC28700 controller IC. The design accepts an input voltage of 90Vin to 110Vin and provides an output of 12Vout capable of supplying 0.3A of current to the load. The UCC28700 has a frequency dithering feature for reduced EMI.
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23 (DBV) 6 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos