TPS22910A
- Integrated Single Load Switch
- Four Pin Wafer-Chip-Scale Package (Nom)
- 0.9 mm × 0.9 mm, 0.5-mm Pitch, 0.5-mm Height (YZV)
- Input Voltage Range: 1.4 V to 5.5 V
- Low ON-Resistance
- rON = 60 mΩ at VIN = 5 V
- rON = 61 mΩ at VIN = 3.3 V
- rON = 74 mΩ at VIN = 1.8 V
- rON = 84 mΩ at VIN = 1.5 V
- 2-A Maximum Continuous Switch Current
- Low Threshold Control Input
- Controlled Slew-rate
- Under-Voltage Lock Out
- Full-Time Reverse Current Protection
- Quick Output Discharge Transistor (TPS22913B/C Devices)
The TPS22910A, TPS22912C, and TPS22913B/C are small, low rON load switches with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals.
The TPS22910A, TPS22912C, and TPS22913B/C devices provide reverse current protection in ON and OFF states. An internal reverse voltage comparator disables the power-switch when the output voltage (VOUT) is driven higher than the input voltage (VIN), by VRCP, to quickly (10 µs typ) stop the flow of current towards the input side of the switch. Reverse current protection is always active, even when the power-switch is disabled. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.
The TPS22913B/C contains a 150-Ω on-chip load resistor for quick output discharge when the switch is turned off.
This family of devices have various slew rate options to avoid inrush current (see for details), are available in an ultra-small, space-saving 4-pin WCSP packages, and are characterized for operation over the free-air temperature range of –40°C to 85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | TPS2291xx Ultra-small, Low On Resistance Load Switch With Controlled Turn-on datasheet (Rev. F) | PDF | HTML | 2015/01/07 |
| E-book | 11 Ways to Protect Your Power Path | 2019/07/03 | ||
| Application note | Load Switch Thermal Considerations (Rev. A) | 2018/10/11 | ||
| Application note | Basics of Load Switches (Rev. A) | 2018/09/05 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Technical article | How to use load switches and eFuses in your set-top box design | PDF | HTML | 2017/11/23 | |
| Application note | Power Multiplexing Using Load Switches and eFuses (Rev. A) | 2017/06/20 | ||
| Application note | Selecting a Load Switch to Replace a Discrete Solution | 2017/04/30 | ||
| Application note | Timing of Load Switches | 2017/04/27 | ||
| Application note | Reverse Current Protection in Load Switches | 2016/05/19 | ||
| Application note | Managing Inrush Current (Rev. A) | 2015/05/28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS22910AEVM-656 — TPS22910A 1.5V~5.5V 단일 채널 부하 스위치 평가 모듈
The TPS2291xxEVM-656 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS29910A Single Channel Load Switch. The EVM allows the user to apply different input voltages (1.4 V to 5.5 V) under different loading conditions (0 A to 2 A) to the TPS22910A. Output, input (...)
TPS63802HDKEVM — TPS63802HDKEVM - 하드웨어 개발 키트
TPS63802HDKEVM은 사용자가 가장 일반적인 벅-부스트 컨버터 사용 사례를 쉽고 빠르게 평가하고 테스트할 수 있도록 설계된 범용 개발 툴입니다. 사용 사례에는 백업 전원, 입력 전류 제한, LED 드라이버, 디지털 전압 스케일링, 바이패스 모드 및 정밀 활성화가 포함됩니다. 사용자는 점퍼와 딥 스위치를 변경하여 서로 다른 사용 사례 중에서 쉽게 선택할 수 있습니다. 납땜은 필요하지 않습니다.
TPS63802HDKEVM은 TPS63802를 사용하며 출력 전압은 3.3V로 설정됩니다. EVM은 입력 전압 범위 (...)
TPS22910A Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-01574 — 전력 도용 온도 조절기용 전력계 레퍼런스 설계
TIDC-CC2650RC — 음성 원격 제어 레퍼런스 설계
TIDA-00288 — 4포트 USB 3.0 허브 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YZV) | 4 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.