計算工具
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
LM25069
- Operating R ange: +2.9V to +17V
- In-rush Current Limit for Safe Board Insertion into Live Power Sources
- Programmable Maximum Power Dissipation in the External Pass Device
- Adjustable Current Limit
- Circuit Breaker Function for Severe Over-Current Events
- Internal High Side Charge Pump and Gate Driver for External N-channel MOSFET
- Adjustable Under-Voltage Lockout (UVLO) and Hysteresis
- Adjustable Over-Voltage Lockout (OVLO) and Hysteresis
- Initial Insertion Timer Allows Ringing and Transients to Subside After System Connection
- Programmable Fault Timer Avoids Nuisance Trips
- Active High Open Drain POWER GOOD Output
- Available in Latched Fault and Automatic Restart Versions
All trademarks are the property of their respective owners.
The LM25069 positive hot swap controller provides intelligent control of the power supply voltage to the load during insertion and removal of circuit cards from a live system backplane or other "hot" power sources. The LM25069 provides in-rush current control to limit system voltage droop and transients. The current limit and power dissipation in the external series pass N-Channel MOSFET are programmable, ensuring operation within the Safe Operating Area (SOA). The POWER GOOD output indicates when the output voltage is within 1.3V of the input voltage. The input under-voltage and over-voltage lockout levels and hysteresis are programmable, as well as the initial insertion delay time and fault detection time. The LM25069-1 latches off after a fault detection, while the LM25069-2 automatically restarts at a fixed duty cycle. The LM25069 is available in a 10 pin VSSOP package.
您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的裝置不同
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | LM25069 Positive Low Voltage Power Limiting Hot Swap Controller datasheet (Rev. E) | 2013年 3月 28日 | |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
| Selection guide | Hot Swap Selection Tool | 2015年 7月 28日 | ||
| EVM User's guide | AN-1947 LM25069 Evaluation Board (Rev. D) | 2013年 5月 6日 | ||
| Application note | Output Voltage Clamping Using the LM5069 Hot Swap Controller (Rev. B) | 2013年 5月 6日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
模擬型號
LM25069-1 Unencrypted PSpice Transient Model Package (Rev. A)
SNVM377A.ZIP (72 KB) - PSpice Model
模擬型號
LM25069-2 TINA-TI Transient Input Transient Reference Design
SNVMA52.TSC (104 KB) - TINA-TI Reference Design
模擬型號
LM25069-2 TINA-TI Transient Power Up Reference Design
SNVMA51.TSC (105 KB) - TINA-TI Reference Design
模擬型號
LM25069-2 TINA-TI Transient Restart Sequence Reference Design
SNVMA50.TSC (115 KB) - TINA-TI Reference Design
模擬型號
LM25069-2 Unencrypted PSpice Transient Model Package (Rev. A)
SNVM378A.ZIP (69 KB) - PSpice Model
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。