首頁 電源管理 電源開關 低側開關
首頁
電源管理
電源開關
低側開關

TPIC7218-Q1

現行

汽車類電源控制器和感測器介面

立即訂購
產品規格表

TPIC7218-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Operating temperature range (°C) -40 to 125 FET Internal Device type Low-side switches
Rating Automotive Operating temperature range (°C) -40 to 125 FET Internal Device type Low-side switches
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4
  • PWM Low-Side Drivers
    • 4 PWM Low-Side Driver Outputs
    • Current Limitation
    • Thermal Protection: TJ = 185°C (Minimum)
    • Open-Load Detection
    • Energy Capability: 30 mJ at TJ = 150°C
    • Clamp Voltage: 40 V
    • Low RDSon: 0.3 Ω (Maximum) at TJ = 150°C
  • Digital Low-Side Drivers
    • 4 Digital Low-Side Driver Outputs
    • Current Limitation
    • Thermal Protection: TJ = 185°C (Minimum)
    • Open-Load Detection
    • Energy Capability: 50 mJ at TJ = 150°C
    • Clamp Voltage: 40 V
    • Low RDSon: 0.2 Ω (Maximum) at TJ = 150°C
  • Dual High-Side Power Drivers
    • Direct Input Control
    • PWM Capability
    • Load Dump (overvoltage) Detection
    • Programmable overcurrent detection
    • Load Leakage Detection
    • Programmable short-circuit Protection
    • Fault detection over SPI
  • Wheel-Speed Sensor Interface
    • Compatible with Intelligent and Active Wheel-
      Speed Sensors
    • 4 High-Side Switches With Short-Circuit
      Protection
    • 4 Low-Side Switches With Short-Circuit
      Protection
    • 2 High Voltage Low-Side Output Drivers
    • 4 Digital Outputs to Indicate the Speed
    • Integrated Data Decoder for Intelligent Wheel-
      Speed Sensors
  • Open-Drain Warning Lamp Drivers
    • 2 High Voltage Drivers
    • Thermal Protection With Hysteresis
    • Current Limitation
    • TJ = 185°C (Minimum)
    • RDSon: 4 Ω at TJ = 150°C
    • Clamp Voltage: 40 V
  • Other Features
    • K-LINE Transceiver
    • 3.3-V or 5-V Compatible Digital IO
    • Internal 3.3-V Regulator
    • Internal Charge Pump
    • 1 Low-Voltage Open-Drain Warning Lamp
      Driver
    • Full Duplex SPI Interface
    • Watchdog Input With Open-Drain Fault
      Reporting for Safety
    • Pb-Free ASIC
    • Compliant With CISPR 25 NB Class 5 for
      Conducted and Radiated Emissions
  • APPLICATIONS
    • Anti-lock Braking Systems (ABS)
    • Electronic Stability Control Systems (ESC)

All other trademarks are the property of their respective owners
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4
  • PWM Low-Side Drivers
    • 4 PWM Low-Side Driver Outputs
    • Current Limitation
    • Thermal Protection: TJ = 185°C (Minimum)
    • Open-Load Detection
    • Energy Capability: 30 mJ at TJ = 150°C
    • Clamp Voltage: 40 V
    • Low RDSon: 0.3 Ω (Maximum) at TJ = 150°C
  • Digital Low-Side Drivers
    • 4 Digital Low-Side Driver Outputs
    • Current Limitation
    • Thermal Protection: TJ = 185°C (Minimum)
    • Open-Load Detection
    • Energy Capability: 50 mJ at TJ = 150°C
    • Clamp Voltage: 40 V
    • Low RDSon: 0.2 Ω (Maximum) at TJ = 150°C
  • Dual High-Side Power Drivers
    • Direct Input Control
    • PWM Capability
    • Load Dump (overvoltage) Detection
    • Programmable overcurrent detection
    • Load Leakage Detection
    • Programmable short-circuit Protection
    • Fault detection over SPI
  • Wheel-Speed Sensor Interface
    • Compatible with Intelligent and Active Wheel-
      Speed Sensors
    • 4 High-Side Switches With Short-Circuit
      Protection
    • 4 Low-Side Switches With Short-Circuit
      Protection
    • 2 High Voltage Low-Side Output Drivers
    • 4 Digital Outputs to Indicate the Speed
    • Integrated Data Decoder for Intelligent Wheel-
      Speed Sensors
  • Open-Drain Warning Lamp Drivers
    • 2 High Voltage Drivers
    • Thermal Protection With Hysteresis
    • Current Limitation
    • TJ = 185°C (Minimum)
    • RDSon: 4 Ω at TJ = 150°C
    • Clamp Voltage: 40 V
  • Other Features
    • K-LINE Transceiver
    • 3.3-V or 5-V Compatible Digital IO
    • Internal 3.3-V Regulator
    • Internal Charge Pump
    • 1 Low-Voltage Open-Drain Warning Lamp
      Driver
    • Full Duplex SPI Interface
    • Watchdog Input With Open-Drain Fault
      Reporting for Safety
    • Pb-Free ASIC
    • Compliant With CISPR 25 NB Class 5 for
      Conducted and Radiated Emissions
  • APPLICATIONS
    • Anti-lock Braking Systems (ABS)
    • Electronic Stability Control Systems (ESC)

All other trademarks are the property of their respective owners

The TPIC7218-Q1 device integrates in single package several functions needed in ABS and ESC electronic control units (ECU). This integration coupled with the minimization of the external components saves valuable ECU board space.

The TPIC7218-Q1 device is an antilock braking controller capable of directly driving eight solenoid valves with internal high-current low-side drivers. Low-side drivers configured for digital control do not require external voltage clamps. The TPIC7218-Q1 device has gate drive capability for two high-side N-Channel MOSFETs that can be used to drive a pump motor and power to all solenoids. The TPIC7218-Q1 device provides a fault-tolerant interface for both Intelligent and Active wheel-speed sensors to an external microprocessor. The TPIC7218-Q1 device can be used with either 3.3- or 5-V microprocessors and uses a standard SPI (Serial-Peripheral Interface).

The TPIC7218-Q1 device has two internal open-drain warning lamp drivers that can be pulled up to battery voltage, as well as one low-voltage driver. An internal state machine monitors a watchdog input and reports faults on a warning-lamp pin and SPI register. A K-Line transceiver is also included. A multitude of safety and fault monitoring functionality supervise both system and TPIC7218-Q1 circuits. Faults must be polled and reset over SPI. The TPIC7218-Q1 device is designed for use in harsh automotive environments, capable of withstanding high operating temperatures and electrically noisy signals and power. Short-to-ground, short-to-battery, and open-load conditions are tolerated and monitored. The TPIC7218-Q1 device also exhibits outstanding Electro-Magnetic Compatibility (EMC) performance.

The TPIC7218-Q1 device integrates in single package several functions needed in ABS and ESC electronic control units (ECU). This integration coupled with the minimization of the external components saves valuable ECU board space.

The TPIC7218-Q1 device is an antilock braking controller capable of directly driving eight solenoid valves with internal high-current low-side drivers. Low-side drivers configured for digital control do not require external voltage clamps. The TPIC7218-Q1 device has gate drive capability for two high-side N-Channel MOSFETs that can be used to drive a pump motor and power to all solenoids. The TPIC7218-Q1 device provides a fault-tolerant interface for both Intelligent and Active wheel-speed sensors to an external microprocessor. The TPIC7218-Q1 device can be used with either 3.3- or 5-V microprocessors and uses a standard SPI (Serial-Peripheral Interface).

The TPIC7218-Q1 device has two internal open-drain warning lamp drivers that can be pulled up to battery voltage, as well as one low-voltage driver. An internal state machine monitors a watchdog input and reports faults on a warning-lamp pin and SPI register. A K-Line transceiver is also included. A multitude of safety and fault monitoring functionality supervise both system and TPIC7218-Q1 circuits. Faults must be polled and reset over SPI. The TPIC7218-Q1 device is designed for use in harsh automotive environments, capable of withstanding high operating temperatures and electrically noisy signals and power. Short-to-ground, short-to-battery, and open-load conditions are tolerated and monitored. The TPIC7218-Q1 device also exhibits outstanding Electro-Magnetic Compatibility (EMC) performance.
filter 尋找其它 低側開關
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPIC7218-Q1 Power Controller and Sensor ASIC For Braking Applications datasheet (Rev. A) PDF | HTML 2015年 7月 31日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片