TPS22930A
- Integrated single channel load switch
- Ultra small four terminal wafer-chip-scale package (nominal dimensions shown see addendum for details)
- 0.9 mm × 0.9 mm, 0.5 mm pitch, 0.5-mm height (YZV)
- Input voltage range: 1.4 V to 5.5 V
- Ultra low RON resistance
- RON = 35 mΩ at VIN = 5 V
- RON = 36 mΩ at VIN = 3.6 V
- RON = 49 mΩ at VIN = 1.8 V
- 2-A maximum continuous switch current
- Low quiescent current (< 3 µA)
- Low control input threshold enables use of 1.2-V/1.8-V/2.5-V/3.3-V logic
- Controlled slew rate
- Under voltage lockout
- Reverse current protection when disabled
The TPS22930 is a small, low RON load switch with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. The TPS22930 is active high enable.
The TPS22930 device provides circuit breaker functionality by disabling the body diode during reverse voltage (also known as reverse current) situations. Reverse current protection is active only when the power-switch is disabled (off). The device disengages the body diode when the output voltage (VOUT) is driven higher than the input (VIN) to stop the flow of current towards the input side of the switch. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.
The slew rate of the device is internally controlled in order to avoid inrush current.
The TPS22930 is available in an ultra-small, space-saving 4-pin CSP package and is characterized for operation over the free-air temperature range of –40°C to 85°C.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS22930 Ultra Small, Low On-Resistance Load Switch with Controlled Turn-On datasheet (Rev. D) | PDF | HTML | 2021年 7月 1日 |
Application note | Load Switch Thermal Considerations (Rev. A) | 2018年 10月 11日 | ||
Application note | Basics of Load Switches (Rev. A) | 2018年 9月 5日 | ||
Application note | Selecting a Load Switch to Replace a Discrete Solution | 2017年 4月 30日 | ||
Application note | Timing of Load Switches | 2017年 4月 27日 | ||
Application note | Managing Inrush Current (Rev. A) | 2015年 5月 28日 | ||
EVM User's guide | Using the TPS22930AEVM-027 Single Channel Load Switch IC | 2012年 10月 28日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS22930AEVM-027 — TPS22930A 負載開關評估模組
The Texas Instruments TPS22930AEVM-027 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS22930A 2A load switch with reverse-current protection. The EVM allows the user to connect power to and control the Ultra-Small CSP-4 package load switch. Parameters such as (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
DSBGA (YZV) | 4 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。