TPS22971
- Input voltage range (VIN): 0.65 V to 3.6 V
- On-resistance
- RDS(on) = 6.7 mΩ (typical) at VIN ≥ 1.8 V
- RDS(on) = 7.2 mΩ (typical) at VIN = 1.05 V
- RDS(on) = 8.9 mΩ (typical) at VIN = 0.65 V
- Maximum continuous switch current (IMAX): 3 A
- ON state (IQ): 30 µA (typical) at 3.6 VIN
- OFF state (ISD): 1 µA (typical) at 3.6 VIN
- Adjustable slew rate through CT pin
- Fast turn-ON ≤ 65 µs at VIN = 1 V
- Power good (PG) indicator after switch turn ON
- Low threshold enable (ON) of 0.9 V (VIH) supports use of low voltage control logic
- Thermal shutdown (TSD)
- Quick output discharge (QOD): 150-Ω (typical)
The TPS22971 is a space-saving single-channel load switch with controlled and adjustable turn-on slew rate and an integrated power good indicator. the device contains an n-channel mosfet that can operate over a low input voltage range of 0.65 v to 3.6 V and can support a maximum continuous current of 3 A. A low on-resistance of 6.7-mΩ minimizes the power loss and voltage drop across the load switch. The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals.
By default, the TPS22971 has a fast turn-on time to minimize system startup and wait time. The adjustable slew rate can also be reduced to limit inrush current. A power good (PG) signal internally monitors the gate threshold and indicates when the switch is fully on. When the switch is disabled, a 150-Ω on-chip resistor quickly discharges the output to ground and keeps it from floating.
The TPS22971 is available in an ultra-small, space saving 8-pin WCSP package and is characterized for operation over the free-air temperature range of –40°C to 105°C and integrates thermal shutdown to turn off in case of overheating.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS22971 3.6-V, 3-A, 6.7-mΩ On-Resistance Load Switch with Adjustable Fast Turn-ON and Power Good datasheet (Rev. C) | PDF | HTML | 2020年 2月 17日 |
| Application note | Basics of Power Switches (Rev. A) | PDF | HTML | 2019年 4月 26日 | |
| Application note | Load Switch Thermal Considerations (Rev. A) | 2018年 10月 11日 | ||
| Application note | Basics of Load Switches (Rev. A) | 2018年 9月 5日 | ||
| Application note | Selecting a Load Switch to Replace a Discrete Solution | 2017年 4月 30日 | ||
| Application note | Timing of Load Switches | 2017年 4月 27日 | ||
| EVM User's guide | TPS22971 Load Switch Evaluation Module User's Guide | 2017年 4月 12日 | ||
| Application note | Fundamentals of On-Resistance in Load Switches | 2016年 6月 9日 | ||
| Application note | Quiescent Current vs Shutdown Current for Load Switch Power Consumption | 2016年 3月 30日 | ||
| Application note | Managing Inrush Current (Rev. A) | 2015年 5月 28日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS22971EVM — TPS22971 3.6V、3A、7.5mΩ 導通電阻負載開關評估模組
TPS22971 Unencrypted PSpice Transient Model Package (Rev. A)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YZP) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。