首頁 介面 USB IC USB Type-C 與 USB 電源傳輸 IC
首頁
介面
USB IC
USB Type-C 與 USB 電源傳輸 IC
最新

TPS26750

現行

支援 240W 擴展功率範圍的 USB Type-C® 和 USB 電力傳輸 (PD) 3.1 控制器

立即訂購
產品規格表

TPS26750

現行
產品規格表 立即訂購

產品詳細資料

Function Type-C Type PD controller Power role DRP, Sink, Source Alternate mode No External power-path control GPIO Data role DFP, DRD, DRP Internal power path 5 V 3 A Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 125
Function Type-C Type PD controller Power role DRP, Sink, Source Alternate mode No External power-path control GPIO Data role DFP, DRD, DRP Internal power path 5 V 3 A Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 125
VQFN (RSM) 32 16 mm² 4 x 4
  • This device is certified by the USB-IF for PD3.1
    • PD3.1 silicon is required for certification of new USB PD designs
    • TPS26750 TID#: 11450
    • Article on PD2.0 vs. PD3.0
  • Optimized for USB Type-C PD power applications
    • Integrated I2C control for TI battery chargers
      • Ex: In Development
    • Web-based GUI and pre-configured firmware
    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c and E2E guide
  • Extended Power Range (EPR)
    • Supports EPR source and sink
    • EPR 28V, 36V, 48V, and AVS
  • Programmable Power Supply(PPS)
    • Supports PPS source and sink
    • Standalone PPS source control TI battery chargers
    • Programmable interface for PPS sink
  • Liquid Detection
    • Measures directly at the Type-C connector
    • Integrated error handling and protection
  • Integrated fully managed power path & protection
    • Integrated 5V, 3A, and 36mΩ sourcing switch
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V and 3A source power path
    • 26V tolerant CC pins for robust protection when connected to non-compliant devices
  • USB Type-C Power Delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • 3.3V LDO output for dead battery support
    • Power supply from 3.3V or VBUS source
    • 1 I2C primary port
    • 1 I2C secondary port
  • This device is certified by the USB-IF for PD3.1
    • PD3.1 silicon is required for certification of new USB PD designs
    • TPS26750 TID#: 11450
    • Article on PD2.0 vs. PD3.0
  • Optimized for USB Type-C PD power applications
    • Integrated I2C control for TI battery chargers
      • Ex: In Development
    • Web-based GUI and pre-configured firmware
    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c and E2E guide
  • Extended Power Range (EPR)
    • Supports EPR source and sink
    • EPR 28V, 36V, 48V, and AVS
  • Programmable Power Supply(PPS)
    • Supports PPS source and sink
    • Standalone PPS source control TI battery chargers
    • Programmable interface for PPS sink
  • Liquid Detection
    • Measures directly at the Type-C connector
    • Integrated error handling and protection
  • Integrated fully managed power path & protection
    • Integrated 5V, 3A, and 36mΩ sourcing switch
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V and 3A source power path
    • 26V tolerant CC pins for robust protection when connected to non-compliant devices
  • USB Type-C Power Delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • 3.3V LDO output for dead battery support
    • Power supply from 3.3V or VBUS source
    • 1 I2C primary port
    • 1 I2C secondary port

The TPS26750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS26750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS26750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI asks the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.

The TPS26750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS26750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS26750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI asks the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.
filter 尋找其它 USB Type-C 與 USB 電源傳輸 IC
下載 觀看有字幕稿的影片 影片
Additional product required

The TPD4S480 will be required for you to continue with the TPS26750 development.  View the TPD4S480

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS26750 USB Type-C® and USB PD Controller With Integrated Power Switches Optimized for Power Applications datasheet PDF | HTML 2024年 9月 30日
Technical article USB Type-C® 與 USB 電力輸送：專為延伸功率範圍和電池供電系統進行設計 (Rev. A) PDF | HTML 2024年 10月 28日
Application note TPS25751 and TPS26750 EEPROM Update Over I2C PDF | HTML 2024年 10月 22日
EVM User's guide TPS26750 Evaluation Module User's Guide PDF | HTML 2024年 9月 27日
Technical article Designing an application to support a wide input voltage and battery voltage PDF | HTML 2023年 11月 23日
User guide TPS26750 Technical Reference Manual PDF | HTML 2023年 9月 26日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS26750EVM — TPS26750 evaluation module

The TPS26750 single port USB Type-C™ and Power Delivery evaluation module (EVM) is specifically intended for evaluating USB Power Delivery extended power range. It allows the user to develop various power profiles and debug existing USB Type-C and Power Delivery systems.

使用指南: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

USBCPD-APPLICATION-CUSTOMIZATION-TOOL — Application customization tool for TI USB-C® PD controllers

The USBCPD-APPLICATION-CUSTOMIZATION-TOOL enables application-specific device configuration and programming of certain USB Power Delivery controllers. The GUI is compatible with the corresponding hardware evaluation modules (EVMs) as well as custom hardware designs using the generated application (...)

支援產品和硬體

支援產品和硬體

產品
USB Type-C 與 USB 電源傳輸 IC
TPS25750 — 具有預先配置 GUI 的高度整合 USB Type-C® 和 USB PD 控制器 TPS25751 — 具有濕度偵測與可編程電源供應的 USB-C® PD 3.1 控制器 TPS26750 — 支援 240W 擴展功率範圍的 USB Type-C® 和 USB 電力傳輸 (PD) 3.1 控制器
硬體開發
開發板
TPS25750EVM — TPS25750 高度整合式 USB Type-C® 和 USB PD 控制器評估模組 TPS25751EVM — TPS25751 評估模組 TPS26750EVM — TPS26750 evaluation module
啟動
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

PMP41115 — 240W 整合式 USB Type-C 和 USB PD3.1 充電器參考設計

此參考設計為可容納 10 至 12 芯電池的整合式 USB Type-C 和 USB 電力輸送 (PD) 充電器，適合電動自行車、高電量行動電源和攜帶式充電站應用。此設計整合 USB PD3.1 控制器 TPS26750 和 TPD4S480，結合 48V 延伸功率範圍 (ERP) USB 連接埠保護器與四開關降壓升壓控制器 BQ25756，以 240W 的功率全面實現 USB PD3.1 功能。PD 控制器可透過 I2C 通訊，與電池充電器控制器 BQ25756 搭配運作。BQ25756 (...)
Test report: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSM) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片