TPS4H000-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C4B
- Quad-Channel 1000-mΩ Smart High-Side Switch With Full Diagnostics
- Version A: Open-Drain Status Output
- Version B: Current-Sense Analog Output
- Wide Operating Voltage 3.4 to 40 V
- Ultralow Standby Current, <500 nA
- High-Accuracy Current Sense:
- ±15% Under >5-mA Load
- Adjustable Current Limit With External Resistor ±20% Under >100-mA Load
- Protection:
- Short-to-GND Protection by Current Limit (Internal or External)
- Thermal Shutdown With Latch-Off Option and Thermal Swing
- Inductive Load Negative Voltage Clamp With Optimized Slew Rate
- Loss of GND and Loss of Battery Protection
- Diagnostic:
- Overcurrent and Short to Ground Detection
- Open-Load and Short-to-Battery Detection
- Global Fault for Fast Interrupt
- 20-Pin Thermally-Enhanced PWP Package
The TPS4H000-Q1 family is a fully protected quad-channel smart high-side switch, with integrated 1000‑mΩ NMOS power FETs.
Full diagnostics and high-accuracy current-sense features enable intelligent control of the load.
An external adjustable current limit improves reliability of the whole system by limiting the inrush or overload current.
您可能會感興趣的類似產品
功能相同,但引腳輸出與所比較的裝置不同
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 15 設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS4H000EVM — TPS4H000-Q1 四通道智慧型高壓側開關評估模組
Texas Instruments TPS4H000-Q1 evaluation module contains a TPS4H000-Q1 integrated circuit (IC), supporting quad channel high side switch application. The purpose of this EVM is to facilitate evaluation of the TPS4H000-Q1 for resistive, capacitive, inductive load.
The TPS4H000-Q1 family is a fully (...)
The TPS4H000-Q1 family is a fully (...)
使用指南: PDF
模擬型號
TPS4H000A-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
SLVMBO5A.ZIP (81 KB) - PSpice Model
模擬型號
TPS4H000B-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
SLVMBO8A.ZIP (84 KB) - PSpice Model
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
HTSSOP (PWP) | 20 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。