首頁 電源管理 閘極驅動器 隔離式閘極驅動器
首頁
電源管理
閘極驅動器
隔離式閘極驅動器

UCC21759-Q1

現行

適用於 IGBT/SiC 且具 DESAT 和內部鉗位的車用 3.0kVrms、± 10A、單通道絕緣式閘極驅動器

立即訂購
產品規格表

UCC21759-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Isolation rating Basic Withstand isolation voltage (VISO) (Vrms) 3000 Working isolation voltage (VIOWM) (Vrms) 990 Transient isolation voltage (VIOTM) (VPK) 4242 Power switch IGBT, SiCFET Peak output current (A) 10 Features Active miller clamp, Fault reporting, Integrated analog to PWM sensor, Power good, Short circuit protection, Soft turn-off Output VCC/VDD (max) (V) 33 Output VCC/VDD (min) (V) 13 Input supply voltage (min) (V) 3 Input supply voltage (max) (V) 5.5 Propagation delay time (µs) 0.09 Input threshold CMOS Operating temperature range (°C) -40 to 150 Rating Automotive Bootstrap supply voltage (max) (V) 990 Rise time (ns) 33 Fall time (ns) 27 Undervoltage lockout (typ) (V) 12
Number of channels 1 Isolation rating Basic Withstand isolation voltage (VISO) (Vrms) 3000 Working isolation voltage (VIOWM) (Vrms) 990 Transient isolation voltage (VIOTM) (VPK) 4242 Power switch IGBT, SiCFET Peak output current (A) 10 Features Active miller clamp, Fault reporting, Integrated analog to PWM sensor, Power good, Short circuit protection, Soft turn-off Output VCC/VDD (max) (V) 33 Output VCC/VDD (min) (V) 13 Input supply voltage (min) (V) 3 Input supply voltage (max) (V) 5.5 Propagation delay time (µs) 0.09 Input threshold CMOS Operating temperature range (°C) -40 to 150 Rating Automotive Bootstrap supply voltage (max) (V) 990 Rise time (ns) 33 Fall time (ns) 27 Undervoltage lockout (typ) (V) 12
SOIC (DW) 16 106.09 mm² 10.3 x 10.3
  • 3kVRMS single channel isolated gate driver
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 3A
    • Device CDM ESD classofication level C3
  • Drives SiC MOSFETs and IGBTs up to 900Vpk
  • 33V maximum output drive voltage (VDD-VEE)
  • High peak drive current and high CMTI
  • ±10A drive strength and split output
  • 150V/ns minimum CMTI
  • 200ns response time fast DESAT protection
  • 4A internal active Miller clamp
  • 400mA soft turn-off under fault conditions
  • Isolated analog sensor with PWM output for
    • Temperature sensing with NTC, PTC or thermal diode
    • High voltage DC-Link or phase voltage
  • Alarm FLT on over current and reset from RST/EN
  • Fast enable/disable response on RST/EN
  • Rejects <40ns noise transients and pulses on input pins
  • 12V VDD UVLO with power good on RDY
  • Inputs/outputs with over/under-shoot transient voltage immunity up to 5V
  • 130ns (maximum) propagation delay and 30ns (maximum) pulse/part skew
  • SOIC-16 DW package with creepage and clearance distance > 8mm
  • Operating junction temperature –40°C to +150°C
  • Safety-related certifications:
    • 4242VPK basic isolation per EN IEC 60747-17 (VDE 0884-17)
  • 3kVRMS single channel isolated gate driver
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 3A
    • Device CDM ESD classofication level C3
  • Drives SiC MOSFETs and IGBTs up to 900Vpk
  • 33V maximum output drive voltage (VDD-VEE)
  • High peak drive current and high CMTI
  • ±10A drive strength and split output
  • 150V/ns minimum CMTI
  • 200ns response time fast DESAT protection
  • 4A internal active Miller clamp
  • 400mA soft turn-off under fault conditions
  • Isolated analog sensor with PWM output for
    • Temperature sensing with NTC, PTC or thermal diode
    • High voltage DC-Link or phase voltage
  • Alarm FLT on over current and reset from RST/EN
  • Fast enable/disable response on RST/EN
  • Rejects <40ns noise transients and pulses on input pins
  • 12V VDD UVLO with power good on RDY
  • Inputs/outputs with over/under-shoot transient voltage immunity up to 5V
  • 130ns (maximum) propagation delay and 30ns (maximum) pulse/part skew
  • SOIC-16 DW package with creepage and clearance distance > 8mm
  • Operating junction temperature –40°C to +150°C
  • Safety-related certifications:
    • 4242VPK basic isolation per EN IEC 60747-17 (VDE 0884-17)

The UCC21759-Q1 is a galvanic isolated single channel gate driver designed for SiC MOSFETs and IGBTs up to 900V DC operating voltage with advanced protection features, best-in-class dynamic performance and robustness. UCC21759-Q1 has up to ±10A peak source and sink current.

The input side is isolated from the output side with SiO2 capacitive isolation technology, supporting up to 636VRMS working voltage with longer than 40 years isolation barrier life, 6kVPK surge immunity, as well as providing low part-to-part skew, and >150V/ns common mode noise immunity (CMTI).

The UCC21759-Q1 includes the state-of-art protection features, such as fast short circuit detection, fault reporting, active Miller clamp, and input and output side power supply UVLO optimized for SiC and IGBT power transistors. The isolated analog to PWM sensor can be utilized for easier temperature or voltage sensing, further increasing the drivers’ versatility and simplifying the system design effort, size, and cost.

The UCC21759-Q1 is a galvanic isolated single channel gate driver designed for SiC MOSFETs and IGBTs up to 900V DC operating voltage with advanced protection features, best-in-class dynamic performance and robustness. UCC21759-Q1 has up to ±10A peak source and sink current.

The input side is isolated from the output side with SiO2 capacitive isolation technology, supporting up to 636VRMS working voltage with longer than 40 years isolation barrier life, 6kVPK surge immunity, as well as providing low part-to-part skew, and >150V/ns common mode noise immunity (CMTI).

The UCC21759-Q1 includes the state-of-art protection features, such as fast short circuit detection, fault reporting, active Miller clamp, and input and output side power supply UVLO optimized for SiC and IGBT power transistors. The isolated analog to PWM sensor can be utilized for easier temperature or voltage sensing, further increasing the drivers’ versatility and simplifying the system design effort, size, and cost.
filter 尋找其它 隔離式閘極驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
UCC21750-Q1 現行 適用於 IGBT/SiC 且具有 DESAT 和內部鉗位的車用 5.7kVrms、±10A 單通道絕緣式閘極驅動器 Same pinout, supports 5.7-kVrms isolation voltage

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet UCC21759 -Q1 Automotive 10A Source/Sink Basic Isolated Single Channel Gate Driver for SiC/IGBT with Active Protection, Isolated Analog Sensing and High-CMTI datasheet (Rev. B) PDF | HTML 2024年 2月 6日
Application brief Does My Design Need a Miller Clamp? PDF | HTML 2024年 12月 11日
Application note Choosing Appropriate Protection Approach for IGBT and SiC Power Modules PDF | HTML 2024年 7月 19日
User guide UCC217xx and ISO5x5x Half-Bridge EVM User's Guide for Wolfspeed 1200-V SiC 2023年 9月 1日
Application brief The Use and Benefits of Ferrite Beads in Gate Drive Circuits PDF | HTML 2021年 12月 16日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC21750QDWEVM-025 — 適用於 SiC 和 IGBT 電晶體和電源模組的驅動和保護評估板

The UCC21750QDWEVM-025 is a compact, single channel isolated gate driver board providing drive, bias voltages, desat feature based protection and diagnostic needed for SiC MOSFET and Si IGBT Power Modules housed in 150 x 62 x 17 mm and 106 x 62 x 30 mm packages. This TI EVM is based on 5.7-kVrms (...)
使用指南: PDF
TI.com 無法提供
計算工具

SLUC695 — UCC217xx XL Calculator Tool

支援產品和硬體

支援產品和硬體

產品
隔離式閘極驅動器
UCC21710-Q1 — 適用於 SiC/IGBT 且具過電流保護功能的車用 5.7kVrms 10A 單通道絕緣式閘極驅動器 UCC21732-Q1 — 適用於 IGBT/SiCFET 且具有 2 段式關閉功能的車用 5.7-kVrms ±10A 單通道隔離式閘極驅動器 UCC21736-Q1 — 適用於 IGBT/SiC 且具主動短路保護功能的車用 5.7kVrms、±10A 絕緣式單通道閘極驅動器 UCC21739-Q1 — 適用於 IGBT/SiC 且具絕緣式類比感測功能的車用 3kVrms、±10A 單通道絕緣式閘極驅動器 UCC21750 — 適用於 IGBT/SiCFET 且具 DESAT 和內部米勒鉗位的 5.7kVrms ± 10A、單通道絕緣式閘極驅動器 UCC21750-Q1 — 適用於 IGBT/SiC 且具有 DESAT 和內部鉗位的車用 5.7kVrms、±10A 單通道絕緣式閘極驅動器 UCC21759-Q1 — 適用於 IGBT/SiC 且具 DESAT 和內部鉗位的車用 3.0kVrms、± 10A、單通道絕緣式閘極驅動器
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

PMP23223 — 配備偏壓電源的智慧型隔離式閘極驅動器參考設計

此參考設計展示 UCC21732 柵極驅動器與 UCC14xxx 系列偏壓電源的組合。此設計可用於驅動各種電源開關，其中包括直接連接至 Wolfspeed 碳化矽 (SiC) 場效應電晶體 (FET) 模組。此參考設計也可做為高側或低側驅動器，或是可以用電容模擬負載進行測試。

UCC14240-Q1、UCC14141-Q1 和 UCC14341-Q1 皆屬於整合式偏壓電源的直接投入使用的替代產品，每個元件都具備不同的目標輸入電壓和輸出功率。

UCC14xxx-Q1 資訊：

  • UCC14240-Q1
    • 隔離：基本
    • 輸入電壓 (V)：24 (21 至 27)
    • 輸出電壓 (V)：25 (18 至 25)
    • 功率輸出 (...)
Test report: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片