Gehäuseinformationen
| Gehäuse | Pins HTSSOP (PWP) | 16 |
| Betriebstemperaturbereich (°C) -40 to 125 |
| Gehäusemenge | Träger 2.000 | LARGE T&R |
Merkmale von TPS2H000-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with
the following results:
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C4B
- Functional safety
capable
- Documentation available to aid functional safety system design
- Dual-Channel 1000-mΩ smart high-side switch with full
diagnostics
- Version A: Open-drain status output
- Version B: Current-Sense analog output
- Wide operating voltage 3.4 to 40 V
- Ultralow standby current, <500 nA
- High-Accuracy
current sense:
- ±10% Under >5-mA load
- Adjustable current limit with external resistor ±20% under >100-mA load
- Protection:
- Short-to-GND protection by current limit (internal or external)
- Thermal shutdown with latch-off option and thermal swing
- Inductive load negative voltage clamp with optimized slew rate
- Loss of GND and loss of battery protection
- Diagnostic:
- Overcurrent and short-to-ground detection
- Open-Load and short-to-battery detection
- Global fault for fast interrupt
- 16-Pin Thermally-Enhanced PWP package
Beschreibung von TPS2H000-Q1
The TPS2H000-Q1 family is a fully protected dual-channel smart high-side switch, with integrated 1000‑mΩ NMOS power FETs.
Full diagnostics and high-accuracy current-sense features enable intelligent control of the load.
An external adjustable current limit improves reliability of the whole system by limiting the inrush or overload current.