Inicio Interfaz Circuitos integrados Ethernet Capa física (PHY) Ethernet
Inicio
Interfaz
Circuitos integrados Ethernet
Capa física (PHY) Ethernet

DP83865

NO RECOMENDADO PARA NUEVOS DISEÑOS

Transceptor de capa física Gigabit 10/100/1000 PHYTER V Ethernet

Haga su pedido ahora
Hoja de datos
DP83865 no se recomienda para nuevos diseños
Este producto sigue estando disponible para los clientes existentes. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
DP83867E ACTIVO Transceptor PHY gigabit ethernet de baja latencia resistente y temperatura ampliada con SGMII The DP83867E requires less than half the power of the DP83865 and has higher temperature range.

DP83865

NO RECOMENDADO PARA NUEVOS DISEÑOS
Hoja de datos Haga su pedido ahora

Detalles del producto

Datarate (Mbps) 10/100/1000 Interface type GMII, MII, RGMII Number of ports Single Rating Catalog Supply voltage (V) 1.8 Operating temperature range (°C) 0 to 70 Number of LEDs 5 ESD HBM (kV) 6
Datarate (Mbps) 10/100/1000 Interface type GMII, MII, RGMII Number of ports Single Rating Catalog Supply voltage (V) 1.8 Operating temperature range (°C) 0 to 70 Number of LEDs 5 ESD HBM (kV) 6
QFP (NND) 128 399.04 mm² 23.2 x 17.2
  • Ultra low power consumption typically 1.1 watt
  • Fully compliant with IEEE 802.3 10BASE-T, 100BASE-TX and 1000BASE-T specifications
  • Integrated PMD sublayer featuring adaptive equalization and baseline wander compensation according to ANSI X3.T12
  • 3.3V or 2.5V MAC interfaces:
  • IEEE 802.3u MII
  • IEEE 802.3z GMII
  • RGMII version 1.3
  • User programmable GMII pin ordering
  • IEEE 802.3u Auto-Negotiation and Parallel Detection
  • Fully Auto-Negotiates between 1000 Mb/s, 100 Mb/s, and 10 Mb/s full duplex and half duplex devices
  • Speed Fallback mode to achieve quality link
  • Cable length estimator
  • LED support for activity, full / half duplex, link1000, link100 and link10, user programmable (manual on/off), or reduced LED mode
  • Supports 25 MHz operation with crystal or oscillator.
  • Requires only two power supplies, 1.8V (core and analog) and 2.5V (analog and I/O). 3.3V is supported as an alternative supply for I/O voltage
  • User programable interrupt
  • Supports Auto-MDIX at 10, 100 and 1000 Mb/s
  • Supports JTAG (IEEE1149.1)
  • 128-pin PQFP package (14mm x 20mm)
  • Ultra low power consumption typically 1.1 watt
  • Fully compliant with IEEE 802.3 10BASE-T, 100BASE-TX and 1000BASE-T specifications
  • Integrated PMD sublayer featuring adaptive equalization and baseline wander compensation according to ANSI X3.T12
  • 3.3V or 2.5V MAC interfaces:
  • IEEE 802.3u MII
  • IEEE 802.3z GMII
  • RGMII version 1.3
  • User programmable GMII pin ordering
  • IEEE 802.3u Auto-Negotiation and Parallel Detection
  • Fully Auto-Negotiates between 1000 Mb/s, 100 Mb/s, and 10 Mb/s full duplex and half duplex devices
  • Speed Fallback mode to achieve quality link
  • Cable length estimator
  • LED support for activity, full / half duplex, link1000, link100 and link10, user programmable (manual on/off), or reduced LED mode
  • Supports 25 MHz operation with crystal or oscillator.
  • Requires only two power supplies, 1.8V (core and analog) and 2.5V (analog and I/O). 3.3V is supported as an alternative supply for I/O voltage
  • User programable interrupt
  • Supports Auto-MDIX at 10, 100 and 1000 Mb/s
  • Supports JTAG (IEEE1149.1)
  • 128-pin PQFP package (14mm x 20mm)

The DP83865 is a fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols.

The DP83865 is an ultra low power version of the DP83861 and DP83891. It uses advanced 0.18 um, 1.8 V CMOS technology, fabricated at National Semiconductors South Portland, Maine facility.

The DP83865 is designed for easy implementation of 10/100/1000 Mb/s Ethernet LANs. It interfaces directly to Twisted Pair media via an external transformer. This device interfaces directly to the MAC layer through the IEEE 802.3u Standard Media Independent Interface (MII), the IEEE 802.3z Gigabit Media Independent Interface (GMII), or Reduced GMII (RGMII).

The DP83865 is a fourth generation Gigabit PHY with field proven architecture and performance. Its robust performance ensures drop-in replacement of existing 10/100 Mbps equipment with ten to one hundred times the performance using the existing networking infrastructure.

The DP83865 is a fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols.

The DP83865 is an ultra low power version of the DP83861 and DP83891. It uses advanced 0.18 um, 1.8 V CMOS technology, fabricated at National Semiconductors South Portland, Maine facility.

The DP83865 is designed for easy implementation of 10/100/1000 Mb/s Ethernet LANs. It interfaces directly to Twisted Pair media via an external transformer. This device interfaces directly to the MAC layer through the IEEE 802.3u Standard Media Independent Interface (MII), the IEEE 802.3z Gigabit Media Independent Interface (GMII), or Reduced GMII (RGMII).

The DP83865 is a fourth generation Gigabit PHY with field proven architecture and performance. Its robust performance ensures drop-in replacement of existing 10/100 Mbps equipment with ten to one hundred times the performance using the existing networking infrastructure.
filter Buscar otro/a Capa física (PHY) Ethernet
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet DP83865 Gig PHYTER V 10/100/1000 Ethernet Physical Layer datasheet (Rev. B) 11 dic 2007

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje