Inicio Interfaz Circuitos integrados Ethernet Capa física (PHY) Ethernet

DP83TG721R-Q1

ACTIVO

PHY Ethernet 1000BASE-T1 automotriz con funciones TC-10, 802.1AS, TSN avanzado y AVB

Detalles del producto

Datarate (Mbps) 1000BASE-T1 Interface type MII, RGMII, RMII Number of ports Single Rating Automotive Features 25-MHz clock out, Cable diagnostics, IEEE 1588v2/802.1AS time synchronization and clock generation, IEEE 802.3bp & Open Alliance (OA) compliant, Integrated LPF, TC-10 compliant, Wettable flank package Supply voltage (V) 1.1, 3.3 I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125 ESD HBM (kV) 8
Datarate (Mbps) 1000BASE-T1 Interface type MII, RGMII, RMII Number of ports Single Rating Automotive Features 25-MHz clock out, Cable diagnostics, IEEE 1588v2/802.1AS time synchronization and clock generation, IEEE 802.3bp & Open Alliance (OA) compliant, Integrated LPF, TC-10 compliant, Wettable flank package Supply voltage (V) 1.1, 3.3 I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125 ESD HBM (kV) 8
VQFN (RHA) 36 36 mm² 6 x 6
  • IEEE802.3bp 1000BASE-T1 compliant
  • OA TC10 compliant, <20µA sleep current
    • Local and remote wake up and wake forwarding
  • Advanced TSN
    • IEEE 1588v2/802.1AS Time Synchronization
    • Hardware time-stamping with integrated phase correction
    • Highly accurate 1pps signal (±15ns)
  • Audio Clocking
    • AVB IEEE 1722 media clock generation capability
    • Phase synchronized wall clock output: 1KHz to 50MHz
    • I2S & TDM8 SCLK/FSYNC/MCLK clock generation
  • Open Alliance TC12 Interoperability and EMC compliant
    • OA EMC compliant
    • SAE J2962-3 EMC Compliant
  • Integrated LPF on MDI pins
  • MAC Interfaces: MII, RMII, RGMII, and SGMII
  • Supported I/O voltages: 3.3V, 2.5V, and 1.8V
  • Pin compatible with TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs
    • Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
  • Diagnostic tool kit
    • Temperature, Voltage, ESD monitor
    • Data throughput calculator : Inbuilt MAC packet generator, counter and error checker
    • Signal Quality Indicator
    • TDR based open and short cable fault detection
    • CQI for cable degradation monitoring
    • Loopback modes
  • AEC-Q100 Qualified
    • IEC61000-4-2 ESD : ±8kV contact discharge
  • IEEE802.3bp 1000BASE-T1 compliant
  • OA TC10 compliant, <20µA sleep current
    • Local and remote wake up and wake forwarding
  • Advanced TSN
    • IEEE 1588v2/802.1AS Time Synchronization
    • Hardware time-stamping with integrated phase correction
    • Highly accurate 1pps signal (±15ns)
  • Audio Clocking
    • AVB IEEE 1722 media clock generation capability
    • Phase synchronized wall clock output: 1KHz to 50MHz
    • I2S & TDM8 SCLK/FSYNC/MCLK clock generation
  • Open Alliance TC12 Interoperability and EMC compliant
    • OA EMC compliant
    • SAE J2962-3 EMC Compliant
  • Integrated LPF on MDI pins
  • MAC Interfaces: MII, RMII, RGMII, and SGMII
  • Supported I/O voltages: 3.3V, 2.5V, and 1.8V
  • Pin compatible with TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs
    • Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
  • Diagnostic tool kit
    • Temperature, Voltage, ESD monitor
    • Data throughput calculator : Inbuilt MAC packet generator, counter and error checker
    • Signal Quality Indicator
    • TDR based open and short cable fault detection
    • CQI for cable degradation monitoring
    • Loopback modes
  • AEC-Q100 Qualified
    • IEC61000-4-2 ESD : ±8kV contact discharge

The DP83TG721-Q1 is an IEEE 802.3bp and Open Alliance compliant automotive 1000Base-T1 Ethernet physical layer transceiver. The DP83TG721-Q1 provides all physical layer functions needed to transmit and receive data over unshielded/shielded single twisted-pair cables. The device provides xMII flexibility with support for RGMII and SGMII MAC interfaces.

DP83TG721-Q1 supports OA TC10 low power sleep feature (with wake forwarding) to reduce system power consumption when communication is not required. This device offers the Diagnostic Tool Kit, with an extensive list of real-time monitoring tools, debug tools and test modes.

DP83TG721-Q1 integrates IEEE 1588v2/802.1AS hardware time stamping & fractional PLL enabling highly accurate time synchronization. The fractional PLL enables frequency/phase synchronization of the Wall Clock eliminating need for external VCXO and generating wide range of time synchronized frequencies needed for Audio, Video and other ADAS applications.

DP83TG721-Q1 also integrates IEEE 1722 CRF decode to generate Media Clock (wall clock synchronized) for AVB & other Audio standards. The DP83TG721-Q1 is also capable of generating FSYNC/SCLK (wall clock synchronized) for I2S/TDM8 interface needed for audio applications.

The DP83TG721-Q1 is compatible to TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs enabling design scalability with single board for both speeds.

The DP83TG721-Q1 is an IEEE 802.3bp and Open Alliance compliant automotive 1000Base-T1 Ethernet physical layer transceiver. The DP83TG721-Q1 provides all physical layer functions needed to transmit and receive data over unshielded/shielded single twisted-pair cables. The device provides xMII flexibility with support for RGMII and SGMII MAC interfaces.

DP83TG721-Q1 supports OA TC10 low power sleep feature (with wake forwarding) to reduce system power consumption when communication is not required. This device offers the Diagnostic Tool Kit, with an extensive list of real-time monitoring tools, debug tools and test modes.

DP83TG721-Q1 integrates IEEE 1588v2/802.1AS hardware time stamping & fractional PLL enabling highly accurate time synchronization. The fractional PLL enables frequency/phase synchronization of the Wall Clock eliminating need for external VCXO and generating wide range of time synchronized frequencies needed for Audio, Video and other ADAS applications.

DP83TG721-Q1 also integrates IEEE 1722 CRF decode to generate Media Clock (wall clock synchronized) for AVB & other Audio standards. The DP83TG721-Q1 is also capable of generating FSYNC/SCLK (wall clock synchronized) for I2S/TDM8 interface needed for audio applications.

The DP83TG721-Q1 is compatible to TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs enabling design scalability with single board for both speeds.

Descargar Ver vídeo con transcripción Video
Solicitar más información

La hoja de datos completa está disponible. Solicitar ahora

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet DP83TG721x-Q1 1000BASE-T1 Automotive Ethernet PHY with Advanced TSN and AVB datasheet (Rev. A) PDF | HTML 10 jun 2024
Application note Basic Ethernet Interface Debug With Linux PDF | HTML 11 oct 2024
Application note How to Integrate Linux Driver Into Your System PDF | HTML 12 jul 2024
Certificate DP83TG721EVM-MC EU RoHS Declaration of Conformity (DoC) 04 nov 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DP83TG721EVM-MC — Módulo de evaluación del convertidor de medios de 1000Base-T1 a 1000Base-T DP83TG721

El DP83TG721EVM-MC admite una velocidad de 1000 Mbps y es compatible con IEEE 802.3bp. Esta placa de evaluación es un convertidor de medios que permite realizar pruebas de tasa de errores de bits y pruebas de interoperabilidad. Hay un MSP430F5529 integrado para su uso con la herramienta de (...)
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHA) 36 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos