Inicio Gestión de la energía Controladores LED Drivers LED RGB
Inicio
Gestión de la energía
Controladores LED
Drivers LED RGB

LP5861

ACTIVO

Controlador LED RGB de 18 canales con regulación analógica de 8 bits y PWM de 8/16 bits

Haga su pedido ahora
Hoja de datos

LP5861

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 18 LED current per channel (mA) 50 LED configuration Matrix Program memory Yes Topology Linear Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.9 Features Analog/PWM mixed dimming, Constant current, Enable/Shutdown, LED Open Detection, LED Short Detection, SPI/I2C, Thermal shutdown Iq (typ) (mA) 4.3 Shutdown current (ISD) (typ) (µA) 1 Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 18 LED current per channel (mA) 50 LED configuration Matrix Program memory Yes Topology Linear Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.9 Features Analog/PWM mixed dimming, Constant current, Enable/Shutdown, LED Open Detection, LED Short Detection, SPI/I2C, Thermal shutdown Iq (typ) (mA) 4.3 Shutdown current (ISD) (typ) (µA) 1 Operating temperature range (°C) -40 to 85 Rating Catalog
VQFN (RSM) 32 16 mm² 4 x 4
  • Operating voltage range:
    • VCC/VLED range: 2.7 V to 5.5 V
    • Logic pins compatible with 1.8 V, 3.3 V, and 5 V
  • 18 constant current sinks with high precision:
    • 0.1 mA–50 mA per current sink when VCC ≥ 3.3 V
    • Device-to-device error: ±5%
    • Channel-to-channel error: ±5%
    • Phase-shift for balanced transient power
  • Ultra-low power consumption:
    • Shutdown mode: ICC ≤ 2 uA when EN = Low
    • Standby mode: ICC ≤ 10 uA when EN = High and CHIP_EN = 0 (data retained)
    • Active mode: ICC = 3 mA (typ.) when channel current = 5 mA
  • Flexible dimming options:
    • Individual ON and OFF control for each LED dot
    • Analog dimming (current gain control)
      • Global 3-bit Maximum Current (MC) setting for all LED dots
      • 3 groups of 7-bit Color Current (CC) setting for red, green, and blue
      • Individual 8-bit Dot Current (DC) setting for each LED dot
    • PWM dimming with audible-noise-free frequency
      • Global 8-bit PWM dimming for all LED dots
      • 3 programmable groups of 8-bit PWM dimming for LED dot arbitrary mapping
      • Individual 8-bit or 16-bit PWM dimming for each LED dot
  • Full addressable SRAM to minimize data traffic
  • Individual LED dot open and short detection
  • Deghosting and low brightness compensation
  • Interface options:
    • 1-MHz (max.) I2C interface when IFS = Low
    • 12-MHz (max.) SPI interface when IFS = High
  • Operating voltage range:
    • VCC/VLED range: 2.7 V to 5.5 V
    • Logic pins compatible with 1.8 V, 3.3 V, and 5 V
  • 18 constant current sinks with high precision:
    • 0.1 mA–50 mA per current sink when VCC ≥ 3.3 V
    • Device-to-device error: ±5%
    • Channel-to-channel error: ±5%
    • Phase-shift for balanced transient power
  • Ultra-low power consumption:
    • Shutdown mode: ICC ≤ 2 uA when EN = Low
    • Standby mode: ICC ≤ 10 uA when EN = High and CHIP_EN = 0 (data retained)
    • Active mode: ICC = 3 mA (typ.) when channel current = 5 mA
  • Flexible dimming options:
    • Individual ON and OFF control for each LED dot
    • Analog dimming (current gain control)
      • Global 3-bit Maximum Current (MC) setting for all LED dots
      • 3 groups of 7-bit Color Current (CC) setting for red, green, and blue
      • Individual 8-bit Dot Current (DC) setting for each LED dot
    • PWM dimming with audible-noise-free frequency
      • Global 8-bit PWM dimming for all LED dots
      • 3 programmable groups of 8-bit PWM dimming for LED dot arbitrary mapping
      • Individual 8-bit or 16-bit PWM dimming for each LED dot
  • Full addressable SRAM to minimize data traffic
  • Individual LED dot open and short detection
  • Deghosting and low brightness compensation
  • Interface options:
    • 1-MHz (max.) I2C interface when IFS = Low
    • 12-MHz (max.) SPI interface when IFS = High

Electronic devices are becoming smarter, requiring to use larger quantity of LEDs for animation and indication purposes and high performance LED matrix driver is required to improve user experience with small solution size.

The LP586x devices are a family of high performance LED matrix drivers. The device integrates 18 constant current sinks with N (N = 1/2/4/6/8/11) switching MOSFETs to support N × 18 LED dots or N × 6 RGB LEDs. The LP5861 integrates 1 MOSFET for up to 18 LED dots or 6 RGB LEDs.

The LP5861 supports both analog dimming and PWM dimming methods. For analog dimming, each LED dot can be adjusted with 256 steps. For PWM dimming, the integrated 8-bit or 16-bit configurable PWM generators enable smooth and audible-noise-free dimming control. Each LED dot can also be arbitrarily mapped into 8-bit Group PWM to achieve dimming control together.

The LP5861 device implements full addressable SRAM to minimize the data traffic. The ghost-cancellation circuitry is integrated to eliminate both upside and downside ghosting. The LP5861 also supports LED open and short detection functions. Both 1-MHz (maximum) I2C and 12-MHz (maximum) SPI are available in LP5861.

Electronic devices are becoming smarter, requiring to use larger quantity of LEDs for animation and indication purposes and high performance LED matrix driver is required to improve user experience with small solution size.

The LP586x devices are a family of high performance LED matrix drivers. The device integrates 18 constant current sinks with N (N = 1/2/4/6/8/11) switching MOSFETs to support N × 18 LED dots or N × 6 RGB LEDs. The LP5861 integrates 1 MOSFET for up to 18 LED dots or 6 RGB LEDs.

The LP5861 supports both analog dimming and PWM dimming methods. For analog dimming, each LED dot can be adjusted with 256 steps. For PWM dimming, the integrated 8-bit or 16-bit configurable PWM generators enable smooth and audible-noise-free dimming control. Each LED dot can also be arbitrarily mapped into 8-bit Group PWM to achieve dimming control together.

The LP5861 device implements full addressable SRAM to minimize the data traffic. The ghost-cancellation circuitry is integrated to eliminate both upside and downside ghosting. The LP5861 also supports LED open and short detection functions. Both 1-MHz (maximum) I2C and 12-MHz (maximum) SPI are available in LP5861.
filter Buscar otro/a Drivers LED RGB
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
LP5862 ACTIVO Controlador de matriz de 2 × 18 LED con regulación analógica de 8 bits y PWM de 8/16 bits 2 scan lines
LP5864 ACTIVO Controlador de matriz de 4 × 18 LED con regulación analógica de 8 bits y PWM de 8/16 bits 4 scan lines
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LP5018 ACTIVO Controlador LED RGB de corriente constante con I2C y 18 canales Only PWM dimming
LP5024 ACTIVO Controlador LED RGB de corriente constante I2C de 24 canales 24-output channel with only PWM dimming

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet LP5861 18-Channel LED Driver With 8-Bit Analog and 8-/16-Bit PWM Dimming datasheet PDF | HTML 03 ene 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LP5860EVM — Módulo de evaluación LP5860 para la regulación de controlador de matriz de 18 LED de 11 × 18

El LP5860EVM se utiliza para evaluar las características, el funcionamiento y el uso del controlador de matriz LED LP5860. El dispositivo LP5860 es una solución de alto rendimiento y tamaño pequeño, que integra 18 disipadores de corriente constante con 11 MOSFET de conmutación, para controlar hasta (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Soporte de software

SNVC245 — LP586x Family Graphical User Interface for Matrix LED Drivers

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Drivers LED RGB
LP5860 — Controlador de matriz de 11 × 18 LED con regulación analógica de 8 bits y PWM de 8/16 bits LP5861 — Controlador LED RGB de 18 canales con regulación analógica de 8 bits y PWM de 8/16 bits LP5862 — Controlador de matriz de 2 × 18 LED con regulación analógica de 8 bits y PWM de 8/16 bits LP5864 — Controlador de matriz de 4 × 18 LED con regulación analógica de 8 bits y PWM de 8/16 bits
Desarrollo de hardware
Placa de evaluación
LP5860EVM — Módulo de evaluación LP5860 para la regulación de controlador de matriz de 18 LED de 11 × 18
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RSM) 32 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos