Inicio Gestión de la energía Controladores LED Controladores para LED en automóviles
Inicio
Gestión de la energía
Controladores LED
Controladores para LED en automóviles

LP8860-Q1

ACTIVO

Controlador LED de 4 canales de alto rendimiento y baja EMI automotriz

Haga su pedido ahora
Hoja de datos

LP8860-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 4 Topology Boost with Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 48 Vout (min) (V) 2 Vout (max) (V) 48 Iout (max) (A) 0.6 Iq (typ) (mA) 2.5 Switching frequency (max) (kHz) 2200 Features Adjustable Switch Frequency, Boost Sync, Fault Diagnostic, Global dimming, Hybrid Dimming/Phase Shift, I2C control, Spread Spectrum
Number of channels 4 Topology Boost with Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 48 Vout (min) (V) 2 Vout (max) (V) 48 Iout (max) (A) 0.6 Iq (typ) (mA) 2.5 Switching frequency (max) (kHz) 2200 Features Adjustable Switch Frequency, Boost Sync, Fault Diagnostic, Global dimming, Hybrid Dimming/Phase Shift, I2C control, Spread Spectrum
HLQFP (VFP) 32 81 mm² 9 x 9
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
  • Input Voltage Operating Range 3 V to 48 V
  • Four High-Precision Current Sinks
    • Current Matching 0.5% (typical)
    • LED String Current up to 150 mA per Channel
    • Dimming Ratio > 13 000:1 With External PWM Brightness Control
    • 16-bit Dimming Control with SPI or I2C
    • Supports Display Mode (Global Dimming) and Cluster Mode (Independent Dimming)
  • Hybrid PWM and Current Dimming for Higher LED Drive Optical Efficiency
  • Synchronization for LED PWM Frequency
  • Boost Controller With Programmable Switching Frequency 100 kHz to 2.2 MHz and Spread-Spectrum Option for Lower EMI
  • Boost Synchronization Input
  • Power-Line FET Control for Inrush Current Protection and Standby Energy Saving
  • Automatic LED Current Reduction With External Temperature Sensor
  • Extensive Fault Diagnostics
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
  • Input Voltage Operating Range 3 V to 48 V
  • Four High-Precision Current Sinks
    • Current Matching 0.5% (typical)
    • LED String Current up to 150 mA per Channel
    • Dimming Ratio > 13 000:1 With External PWM Brightness Control
    • 16-bit Dimming Control with SPI or I2C
    • Supports Display Mode (Global Dimming) and Cluster Mode (Independent Dimming)
  • Hybrid PWM and Current Dimming for Higher LED Drive Optical Efficiency
  • Synchronization for LED PWM Frequency
  • Boost Controller With Programmable Switching Frequency 100 kHz to 2.2 MHz and Spread-Spectrum Option for Lower EMI
  • Boost Synchronization Input
  • Power-Line FET Control for Inrush Current Protection and Standby Energy Saving
  • Automatic LED Current Reduction With External Temperature Sensor
  • Extensive Fault Diagnostics

The LP8860-Q1 is an automotive high-efficiency LED driver with boost controller. It has 4 high-precision current sinks that can be controlled by a PWM input signal, an SPI or I2C master, or both.

The boost converter has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the LP8860-Q1 to avoid disturbance for AM radio band.

The LP8860-Q1 supports built-in hybrid PWM and current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency. Phase-shift PWM reduces audible noise and output ripple.

The LP8860-Q1 is an automotive high-efficiency LED driver with boost controller. It has 4 high-precision current sinks that can be controlled by a PWM input signal, an SPI or I2C master, or both.

The boost converter has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the LP8860-Q1 to avoid disturbance for AM radio band.

The LP8860-Q1 supports built-in hybrid PWM and current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency. Phase-shift PWM reduces audible noise and output ripple.

filter Buscar otro/a Controladores para LED en automóviles
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LP8864-Q1 ACTIVO Controlador de retroiluminación LED para pantallas de automóviles con cuatro canales de 200 mA Upgraded four channel version with enhanced diagnostics feature and power density
LP8864S-Q1 ACTIVO Retroiluminación LED para pantallas de automóviles con cuatro canales de 150 mA Upgrade four channel version with enhanced diagnostics feature
LP8866-Q1 ACTIVO Controlador de retroiluminación LED automotriz con seis canales de 200 mA Upgraded version with enhanced diagnostics feature and power density
Funcionalidad similar a la del dispositivo comparado
LP8866S-Q1 ACTIVO Retroiluminación LED para pantallas de automóviles con seis canales de 150 mA Upgraded version with enhanced diagnostics feature and power density

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 11
Tipo Título Fecha
* Data sheet LP8860-Q1 Low-EMI Automotive LED Driver With Four 150-mA Channels datasheet (Rev. G) PDF | HTML 31 oct 2017
Application note Selecting the Correct LP8860-Q1 EEPROM Version (Rev. D) PDF | HTML 04 sep 2020
Application note Some Guidelines and Tips for the LED Driver Application 14 ago 2019
Application note LP8860-Q1 Boost Compensation Registers (Rev. A) 12 ago 2019
Application note LP8860-Q1 Electrical Overstress Analysis and Recommendation 07 ago 2018
Application note Automotive Cold Crank Operation with LP8860-Q1 04 abr 2018
Application note Using the LP8860-Q1 for Low EMI Automotive Designs 15 feb 2018
White paper Powering automotive displays to create interactive driving experiences 21 dic 2017
Application note LP8860-Q1 End-of-Line Programming guide of EEPROM 14 dic 2017
Application note PCB Layout Guideline for Automotive LED Drivers 07 abr 2017
EVM User's guide LP8860-Q1EVM User's Guide (Rev. A) 12 jun 2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Controlador o biblioteca

LP8860SW-LINUX — Controlador Linux para LP8860-Q1

The Linux driver supports the LP8860 4-Channel LED Driver. The Linux driver supports communication through the I2C bus and interfaces with the LED sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • lp8860

 

Linux Source Files

The files (...)

View Options
GUI para el módulo de evaluación (EVM)

SNVC156 — LP8860EVM GUI

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Controladores para LED en automóviles
LP8860-Q1 — Controlador LED de 4 canales de alto rendimiento y baja EMI automotriz
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Diseños de referencia

TIDA-00169 — Solución de pantalla LCD TFT de calidad automotriz

This reference design implements a video over LVDS solution for automotive infotainment applications.It highlights the support of multi-touch with haptic feedback, LCD backlight control, and ambient light sensing, without the introduction of dedicated support lines back to the host processor. This (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HLQFP (VFP) 32 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos