Inicio Gestión de la energía Controladores LED Drivers para pantallas LED

TLC6983

ACTIVO

Controlador de pantalla LED de matriz de cátodo común de 48 x 16 con potencia ultrabaja

Detalles del producto

Features 48CH LED Driver, Fault Detection, Internal GS Clock, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, Matrix, Pre-Charge FET, SRAM, Thermal shutdown Data transfer rate (typ) (MHz) 50 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -40 to 85
Features 48CH LED Driver, Fault Detection, Internal GS Clock, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, Matrix, Pre-Charge FET, SRAM, Thermal shutdown Data transfer rate (typ) (MHz) 50 Ch to ch accuracy (typ) (±%) 1 Rating Catalog Operating temperature range (°C) -40 to 85
NFBGA (ZXL) 96 36 mm² 6 x 6 VQFN (RRF) 76 81 mm² 9 x 9
  • Separated VCC and VR/G/B power supply
    • VCC voltage range: 2.5 V–5.5 V
    • VR/G/B voltage range: 2.5 V–5.5 V
  • 48 current source channels from 0.2 mA to 20 mA
    • Channel-to-channel accuracy: ±0.5% (typ.), ±2% (max.); device-to-device accuracy: ±0.5% (typ.), ±2% (max.)
    • Low knee voltage: 0.26 V (max.) when IOUT = 5 mA
    • 3-bits (8 steps) global brightness control
    • 8-bits (256 steps) color brightness control
    • Maximum 16-bits (65536 steps) PWM grayscale control
  • 16 scan line switches with 190-mΩ RDS(ON)
  • Ultra-low power consumption
    • Independent VCC down to 2.5 V
    • Lowest ICC down to 3.9 mA with 50-MHz GCLK
    • Intelligent power saving mode
  • Built-in SRAM to support 1 - 32 multiplexing
    • Single device with 16 multiplexing to support 32 × 16 LEDs or 16 × 16 RGB pixels
    • Dual devices stackable with 32 multiplexing to support 96 × 32 LEDs or 32 × 32 RGB pixels
  • High speed and low EMI Continuous Clock Series Interface (CCSI)
    • Only three wires: SCLK/SIN/SOUT
    • External 25-MHz (max.) SCLK with dual-edge transmission mechanism (internal 50 MHz)
    • Internal frequency multiplier to support high GCLK frequency
  • Optimized display performance
    • Upside and downside ghosting removal
    • Low grayscale enhancement
    • LED open/short/weak short detection and removal
  • Separated VCC and VR/G/B power supply
    • VCC voltage range: 2.5 V–5.5 V
    • VR/G/B voltage range: 2.5 V–5.5 V
  • 48 current source channels from 0.2 mA to 20 mA
    • Channel-to-channel accuracy: ±0.5% (typ.), ±2% (max.); device-to-device accuracy: ±0.5% (typ.), ±2% (max.)
    • Low knee voltage: 0.26 V (max.) when IOUT = 5 mA
    • 3-bits (8 steps) global brightness control
    • 8-bits (256 steps) color brightness control
    • Maximum 16-bits (65536 steps) PWM grayscale control
  • 16 scan line switches with 190-mΩ RDS(ON)
  • Ultra-low power consumption
    • Independent VCC down to 2.5 V
    • Lowest ICC down to 3.9 mA with 50-MHz GCLK
    • Intelligent power saving mode
  • Built-in SRAM to support 1 - 32 multiplexing
    • Single device with 16 multiplexing to support 32 × 16 LEDs or 16 × 16 RGB pixels
    • Dual devices stackable with 32 multiplexing to support 96 × 32 LEDs or 32 × 32 RGB pixels
  • High speed and low EMI Continuous Clock Series Interface (CCSI)
    • Only three wires: SCLK/SIN/SOUT
    • External 25-MHz (max.) SCLK with dual-edge transmission mechanism (internal 50 MHz)
    • Internal frequency multiplier to support high GCLK frequency
  • Optimized display performance
    • Upside and downside ghosting removal
    • Low grayscale enhancement
    • LED open/short/weak short detection and removal

With the pixel density getting higher in narrow pixel pitch LED Display or mini and micro-LED products, there are urgent demands for LED drivers to address those critical challenges: ultra-high integration to meet the strict board space limitation, ultra low power to minimize the system level power dissipation, new interface to enable high data refresh rate with low EMI impact, and excellent display performance to serve the growing needs of higher display quality.

The TLC6983 is a highly integrated common cathode matrix LED display driver with 48 constant current sources and 16 scanning FETs. A single TLC6983 is capable of driving 16 × 16 RGB LED pixels while stacking two TLC6983s can drive 32 × 32 RGB LED pixels. To achieve low power consumption, the device supports separated power supplies for the red, green, and blue LEDs by its common cathode structure. Furthermore, the operation power of the TLC6983 is significantly reduced by ultra-low operation voltage range (Vcc down to 2.5 V) and ultra-low operation current (Icc down to 3.9 mA).

The TLC6983 implements a high speed dual-edge transmission interface to support high device count daisy-chained and high refresh rate while minimizing electrical-magnetic interference (EMI). The device supports up to 25-MHz SCLK (external) and up to 160-MHz GCLK (internal). Meanwhile, the device integrates enhanced circuits and intelligent algorithms to solve the various display challenges in Narrow Pixel Pitch (NPP) LED display applications and mini and micro-LED products: dim at the first scan line, upper and downside ghosting, non-uniformity in low grayscale, coupling, and caterpillar caused by open or short LEDs, which make the TLC6983 a perfect choice in such applications.

The TLC6983 also implements LED open/weak short/short detections and removals during operations and can also report this information to the accompanying digital processor.

With the pixel density getting higher in narrow pixel pitch LED Display or mini and micro-LED products, there are urgent demands for LED drivers to address those critical challenges: ultra-high integration to meet the strict board space limitation, ultra low power to minimize the system level power dissipation, new interface to enable high data refresh rate with low EMI impact, and excellent display performance to serve the growing needs of higher display quality.

The TLC6983 is a highly integrated common cathode matrix LED display driver with 48 constant current sources and 16 scanning FETs. A single TLC6983 is capable of driving 16 × 16 RGB LED pixels while stacking two TLC6983s can drive 32 × 32 RGB LED pixels. To achieve low power consumption, the device supports separated power supplies for the red, green, and blue LEDs by its common cathode structure. Furthermore, the operation power of the TLC6983 is significantly reduced by ultra-low operation voltage range (Vcc down to 2.5 V) and ultra-low operation current (Icc down to 3.9 mA).

The TLC6983 implements a high speed dual-edge transmission interface to support high device count daisy-chained and high refresh rate while minimizing electrical-magnetic interference (EMI). The device supports up to 25-MHz SCLK (external) and up to 160-MHz GCLK (internal). Meanwhile, the device integrates enhanced circuits and intelligent algorithms to solve the various display challenges in Narrow Pixel Pitch (NPP) LED display applications and mini and micro-LED products: dim at the first scan line, upper and downside ghosting, non-uniformity in low grayscale, coupling, and caterpillar caused by open or short LEDs, which make the TLC6983 a perfect choice in such applications.

The TLC6983 also implements LED open/weak short/short detections and removals during operations and can also report this information to the accompanying digital processor.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Tipo Título Fecha
* Data sheet TLC6983 48 × 16 Common Cathode Matrix LED Display Driver with Ultra-Low Power datasheet (Rev. A) PDF | HTML 31 may 2022
User guide LP589x(-Q1)/TLC698x Sample Code User's Guide (Rev. A) PDF | HTML 06 sep 2024
EVM User's guide TLC6983 48x16 Common Cathode Matrix LED Display Driver Evaluation Module (Rev. A) PDF | HTML 03 sep 2024
Application note Common LED Display Challenges, Root Causes and Workarounds in Narrow Pixel Pitch Matrix LED Display PDF | HTML 25 jun 2024
Application note Example of LED Display Screen Design Requirements Based on TLC6983 PDF | HTML 31 jul 2023
Application note The Common LED Display Challenges in Narrow Pixel Pitch Matrix LED Display PDF | HTML 12 jun 2023
Certificate TLC6983EVM EU RoHS Declaration of Conformity (DoC) 14 ene 2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TLC6983EVM — Módulo de evaluación TLC6983 de controlador de pantalla LED de matriz de cátodo común de 48 x 16

El módulo de evaluación TLC6983 se utiliza como referencia para la demostración y evaluación de ingeniería. En la guía del usuario, se incluyen instrucciones de configuración, un diagrama esquemático, un diseño de placa impresa (PCB) y una lista de materiales (BOM).

Guía del usuario: PDF | HTML
Software de aplicación y estructura

TLC6983EVM-F280039C-SW TLC6983 reference code based on TMS320F280039C (LAUNCHXL-F280039C)

This reference code showcases the ability of the TMS320F280039C device to communicate with the TLC6983 LED driver. The code configures the MCU using CLB to drive the LEDs on the EVM.
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Drivers para pantallas LED
TLC6983 Controlador de pantalla LED de matriz de cátodo común de 48 x 16 con potencia ultrabaja
Desarrollo de hardware
Placa de evaluación
TLC6983EVM Módulo de evaluación TLC6983 de controlador de pantalla LED de matriz de cátodo común de 48 x 16
Opciones de descarga
Herramienta de cálculo

SLVRBM0 TLC6983 Registers Map Generation Tool

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Drivers para pantallas LED
TLC6983 Controlador de pantalla LED de matriz de cátodo común de 48 x 16 con potencia ultrabaja
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
NFBGA (ZXL) 96 Ultra Librarian
VQFN (RRF) 76 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos