Inicio Gestión de la energía Controladores LED Controladores para LED en automóviles
Inicio
Gestión de la energía
Controladores LED
Controladores para LED en automóviles

TLC6C5724-Q1

ACTIVO

Controlador LED RGB de corriente constante de diagnóstico completo y 24 canales para automoción

Haga su pedido ahora
Hoja de datos

TLC6C5724-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 24 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 7 Iout (max) (A) 1.2 Features Adjacent-Pin Short Detection, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, LED Shorted Detection, LED Weak Supply Diagnostics, Reference Resistor Open or Short Detection, SPI Register Lock for Content Protection, Thermal Prewarning and Shutdown
Number of channels 24 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 7 Iout (max) (A) 1.2 Features Adjacent-Pin Short Detection, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, LED Shorted Detection, LED Weak Supply Diagnostics, Reference Resistor Open or Short Detection, SPI Register Lock for Content Protection, Thermal Prewarning and Shutdown
HTSSOP (DAP) 38 101.25 mm² 12.5 x 8.1
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to 125°C, TA
  • 24 Constant-Current-Sink Output Channels
    • 50-mA Maximum Output Current
    • 8-V Maximum Output Voltage
    • 3 Output Groups: OUTRn, OUTGn, OUTBn
  • Output Current Adjustment
    • 7-Bit Dot Correction for Each Channel
    • 8-Bit Intensity Control for Each Group
  • Integrated PWM Grayscale Generator
    • PWM Dimming for Each Individual Channel
    • Adjustable Global Grayscale Mode: 12-Bit, 10-Bit, 8-Bit
  • Protection and Diagnostics
    • LED-Open Detection, LED-Short Detection, Output Short-to-GND Detection
    • Adjacent-Pin Short Detection
    • Pre-Thermal Warning, Thermal Shutdown
    • IREF Resistor Open- and Short-Detection and -Protection
    • Negate Bit Toggle for GCLK Error Detect and LOD_LSD Register Error Check
    • LOD_LSD Circuit Self-Test
  • Programmable Output Slew Rate
  • Output Channel Group Delay
  • Serial Data Interface
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to 125°C, TA
  • 24 Constant-Current-Sink Output Channels
    • 50-mA Maximum Output Current
    • 8-V Maximum Output Voltage
    • 3 Output Groups: OUTRn, OUTGn, OUTBn
  • Output Current Adjustment
    • 7-Bit Dot Correction for Each Channel
    • 8-Bit Intensity Control for Each Group
  • Integrated PWM Grayscale Generator
    • PWM Dimming for Each Individual Channel
    • Adjustable Global Grayscale Mode: 12-Bit, 10-Bit, 8-Bit
  • Protection and Diagnostics
    • LED-Open Detection, LED-Short Detection, Output Short-to-GND Detection
    • Adjacent-Pin Short Detection
    • Pre-Thermal Warning, Thermal Shutdown
    • IREF Resistor Open- and Short-Detection and -Protection
    • Negate Bit Toggle for GCLK Error Detect and LOD_LSD Register Error Check
    • LOD_LSD Circuit Self-Test
  • Programmable Output Slew Rate
  • Output Channel Group Delay
  • Serial Data Interface

There are automotive applications for indicators and for LCD local-dimming backlighting. For these applications, more persons think multi-channel constant-current LED drivers are necessary. The requirement is to get the same intensity and color temperature of LEDs. For system-level safety, it is necessary that the LED drivers can sense faults.

The TLC6C5724-Q1 device is an automotive 24-channel constant-current RGB LED driver that can do tests on the LEDs. The TLC6C5724-Q1 device supplies a maximum of 50‑mA output current set by an external resistor. The device has a 7-bit dot correction with two ranges for each output. The device also has an 8-bit intensity control for the outputs of each color group. A 12-,10-, or 8-bit grayscale control adjusts the intensity of each output. The device has circuits that sense faults in the system, including LED faults, adjacent-pin short faults, reference-resistor faults, and more. A slew rate control has 2 positions for adjustment to get the largest decrease in system noise. There is an interval between the changes of output level from one LED group to a different one. This interval helps to decrease the starting electrical current. The SDI and SDO pins let more than one device be connected in series for control through one serial interface.

There are automotive applications for indicators and for LCD local-dimming backlighting. For these applications, more persons think multi-channel constant-current LED drivers are necessary. The requirement is to get the same intensity and color temperature of LEDs. For system-level safety, it is necessary that the LED drivers can sense faults.

The TLC6C5724-Q1 device is an automotive 24-channel constant-current RGB LED driver that can do tests on the LEDs. The TLC6C5724-Q1 device supplies a maximum of 50‑mA output current set by an external resistor. The device has a 7-bit dot correction with two ranges for each output. The device also has an 8-bit intensity control for the outputs of each color group. A 12-,10-, or 8-bit grayscale control adjusts the intensity of each output. The device has circuits that sense faults in the system, including LED faults, adjacent-pin short faults, reference-resistor faults, and more. A slew rate control has 2 positions for adjustment to get the largest decrease in system noise. There is an interval between the changes of output level from one LED group to a different one. This interval helps to decrease the starting electrical current. The SDI and SDO pins let more than one device be connected in series for control through one serial interface.
filter Buscar otro/a Controladores para LED en automóviles
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TLC6C5748-Q1 ACTIVO Controlador LED PWM de 48 canales y 16 bits con ajustes de corriente internos Lower output channel count and higher output current

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TLC6C5724-Q1 Automotive 24-Channel, Full Diagnostics, Constant-Current RGB LED Driver datasheet (Rev. A) PDF | HTML 14 ago 2018
Functional safety information TLC6C5724-Q1 Functional Safety, FIT Rate, and Failure Mode Distribution 27 abr 2020
Technical article How semiconductor technologies are changing automotive lighting roadmaps PDF | HTML 24 oct 2019
EVM User's guide TLC6C5724-Q1 EVM User's Guide 04 dic 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TLC6C5724EVM — Módulo de evaluación TLC6C5724-Q1 para controlador LED de corriente constante de 24 canales

Guía del usuario: PDF
No disponible en TI.com
GUI para el módulo de evaluación (EVM)

SLAC776 — TLC6C5724EVM GUI

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Controladores para LED en automóviles
TLC6C5724-Q1 — Controlador LED RGB de corriente constante de diagnóstico completo y 24 canales para automoción
Desarrollo de hardware
Placa de evaluación
TLC6C5724EVM — Módulo de evaluación TLC6C5724-Q1 para controlador LED de corriente constante de 24 canales
Descargar
Modelo de simulación

TLC6C5724-Q1 PSpice Transient Model

SLAM327.ZIP (189 KB) - PSpice Model
Descargar
Modelo de simulación

TLC6C5724-Q1 Unencrypted PSpice Transient Model

SLAM326.ZIP (28 KB) - PSpice Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Diseños de referencia

TIDA-020012 — Diseño de referencia de luz de cúpula pixelada para automoción para iluminación interior

This reference design details a solution to drive and control 30 LEDs individually for automotive interior dome light applications. The high pixel count can be used to create different light zones or welcome light animations. The design also implements LED multiplexing functionality to control up (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-020001 — Diseño de referencia de retroiluminación de atenuación local y 144 zonas para automoción

This local dimming backlight reference design conserves power, extends the life of liquid-crystal displays (LCDs), and enhances automotive display quality through high dynamic range (HDR) or localized dimming technology. Seven multi-channel constant-current LED drivers allow for 144-zone localized (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (DAP) 38 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos