Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)

TPS50601A-SP

ACTIVO

Convertidor reductor síncrono QMLV reforzado contra la radiación, entrada de 3 V a 7 V, 6 A

Detalles del producto

Rating Space Operating temperature range (°C) -55 to 125 Topology Buck Type Converter Iout (max) (A) 6 Vin (min) (V) 3 Vin (max) (V) 7 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.804 Vout (max) (V) 6.7 Iq (typ) (µA) 5000 Duty cycle (max) (%) 100
Rating Space Operating temperature range (°C) -55 to 125 Topology Buck Type Converter Iout (max) (A) 6 Vin (min) (V) 3 Vin (max) (V) 7 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.804 Vout (max) (V) 6.7 Iq (typ) (µA) 5000 Duty cycle (max) (%) 100
CFP (HKH) 20 93.726 mm² 12.7 x 7.38 DIESALE (KGD) See data sheet
  • 5962-10221:
    • Radiation hardened up to TID 100 krad(Si)
    • ELDRS free 100 krad(Si) – 10 mrad(Si)/s
    • Single lhup (SEL) Immune to
      LET = 75 MeV-cm2/mg
    • SEB and SEGR immune to 75 MeV-cm2/mg, SOA Curve Available
    • SET/SEFI Cross-section plot available
  • peak efficiency: 96.6% (VO = 3.3 V)
  • Integrated 58-mΩ/50-mΩ MOSFETs
  • Power rail: 3 to 7 V on VIN
  • 6-A Maximum output current
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz Adjustable internal oscillator
    • External sync capability: 100 kHz to 1 MHz
    • Sync pin can be configured as a 500-kHz output for master/slave applications
  • 0.804-V ±1.5% Voltage reference overtemperature, radiation, and line and load regulation
  • Monotonic start-up into prebiased outputs
  • Adjustable soft start through external capacitor
  • Input enable and power-good output for power sequencing
  • Power good output monitor for undervoltage and overvoltage
  • Adjustable input undervoltage lockout (UVLO)
  • 20-Pin Ultra-small, thermally-enhanced ceramic flatpack package (hkh) for space applications
  • 5962-10221:
    • Radiation hardened up to TID 100 krad(Si)
    • ELDRS free 100 krad(Si) – 10 mrad(Si)/s
    • Single lhup (SEL) Immune to
      LET = 75 MeV-cm2/mg
    • SEB and SEGR immune to 75 MeV-cm2/mg, SOA Curve Available
    • SET/SEFI Cross-section plot available
  • peak efficiency: 96.6% (VO = 3.3 V)
  • Integrated 58-mΩ/50-mΩ MOSFETs
  • Power rail: 3 to 7 V on VIN
  • 6-A Maximum output current
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz Adjustable internal oscillator
    • External sync capability: 100 kHz to 1 MHz
    • Sync pin can be configured as a 500-kHz output for master/slave applications
  • 0.804-V ±1.5% Voltage reference overtemperature, radiation, and line and load regulation
  • Monotonic start-up into prebiased outputs
  • Adjustable soft start through external capacitor
  • Input enable and power-good output for power sequencing
  • Power good output monitor for undervoltage and overvoltage
  • Adjustable input undervoltage lockout (UVLO)
  • 20-Pin Ultra-small, thermally-enhanced ceramic flatpack package (hkh) for space applications

The TPS50601A-SP is a radiation hardened, 7-V, 6-A synchronous step-down converter, which is optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and a high switching frequency, reducing the inductor’s footprint. The devices are offered in an ultra small, thermally enhanced 20-pin ceramic flatpack package.

The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins. In addition, the TPS50601A-SP can be configured in master-slave mode to provide up to 12-A of output current.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part when die temperature exceeds thermal shutdown temperature.

The TPS50601A-SP is a radiation hardened, 7-V, 6-A synchronous step-down converter, which is optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and a high switching frequency, reducing the inductor’s footprint. The devices are offered in an ultra small, thermally enhanced 20-pin ceramic flatpack package.

The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins. In addition, the TPS50601A-SP can be configured in master-slave mode to provide up to 12-A of output current.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part when die temperature exceeds thermal shutdown temperature.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS7H4001-SP ACTIVO Convertidor reductor síncrono de 18 A de 3 V a 7 V de entrada, QMLV y QMLP, resistente a la radia 18-A product has the ability to parallel devices together to scale the solution up to 72 A.
TPS7H4002-SP ACTIVO Convertidor reductor síncrono QMLV reforzado contra la radiación, entrada de 3 V a 5.5 V, 3 A Radiation-hardened-assured (RHA) option with lower current (3-A) capabilities.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 28
Tipo Título Fecha
* Data sheet TPS50601A-SP Radiation Hardened 3-V to 7-V Input, 6-A Synchronous Buck Converter datasheet (Rev. D) PDF | HTML 21 feb 2019
* Radiation & reliability report TPS50601A-SP Total Ionizing Dose (TID) Radiation Report (Rev. B) 30 may 2019
* Radiation & reliability report TPS50601A-SP Single-event Effects (SEE) Test Report (Rev. A) 05 feb 2019
* Radiation & reliability report TPS50601A-SP Neutron Displacement Damage (NDD) Characterization Report (Rev. A) 24 jul 2018
* SMD TPS50601A-SP SMD 5962-10221 21 jun 2016
Application brief DLA Approved Optimizations for QML Products (Rev. A) PDF | HTML 05 jun 2024
Selection guide TI Space Products (Rev. J) 12 feb 2024
Application note Using Space Grade Power Components to Power AMD Kintex XQRKU060 FPGA PDF | HTML 08 nov 2023
Application note Using Space Grade Power Components to Power Microchip RTAX-S/SL FPGA PDF | HTML 29 sep 2023
Application note Using Space Grade Power Components to Power Microchip RT PolarFire FPGA PDF | HTML 20 sep 2023
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) 31 ago 2023
Application note QML flow, its importance, and obtaining lot information (Rev. C) 30 ago 2023
White paper Space Power Supply for the STAR-Tiger SpaceFibre Routing Switch PDF | HTML 27 jul 2023
Application note Space Grade Power Solution for Microsemi RTG4 PDF | HTML 02 may 2023
Application note TI Space Rated Power Solution for Microsemi® RTG4™ FPGA (Rev. B) PDF | HTML 19 ene 2023
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 17 nov 2022
Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19 oct 2022
Application note DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21 ago 2020
User guide TPS50601A-SP Worst Case Analysis Unencrypted PSpice Average Model User's Guide (Rev. A) PDF | HTML 18 jun 2020
Application note Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form PDF | HTML 18 may 2020
Application note Failure Containment in Spacecraft Point-of-Load Power Supplies 30 abr 2020
Application note TPS50601x-SP Comparison Guide (Rev. A) PDF | HTML 06 abr 2020
Application note TPS50601A-SP Small Form Factor Buck Converter 01 abr 2020
Technical article 4 trends in space-grade power management PDF | HTML 12 feb 2020
E-book Radiation Handbook for Electronics (Rev. A) 21 may 2019
Technical article When failure isn’t an option: power up your next satellite with integrated functio PDF | HTML 30 abr 2019
User guide TPS50601A-SP dual regulator evaluation module (EVM) 15 feb 2019
User guide TSW12D1620EVM-CVAL User's Guide (Rev. A) 29 ene 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ADC12DJ3200EVMCVAL — Módulo de evaluación ADC12DJ3200QML-SP

El ADC12DJ3200EVMCVAL consiste en un módulo de evaluación (EVM) que tiene como función evaluar el dispositivo ADC12DJ3200QML-SP. El ADC12DJ3200QML-SP es un convertidor de señal analógica a digital (ADC) de muestreo de RF de calidad espacial, baja potencia, 12 bits, doble de 3.2 GSPS o simple de (...)

Guía del usuario: PDF
Placa de evaluación

TPS50601ASPEVM-D — Módulo de evaluación de doble funcionamiento TPS50601A-SP

The TPS50601A-SP is a radiation hardened, 7-V, 6-A synchronous step-down converter, which is optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs.  The device offers optimum electrical and radiation performance in a very small, thermally (...)

Guía del usuario: PDF
Placa de evaluación

TPS50601ASPEVM-S — Módulo de evaluación de funcionamiento simple TPS50601A-SP

The TPS50601A-SP is a radiation hardened, 6.3-V, 6-A synchronous step-down converter, which is optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and (...)
Guía del usuario: PDF
Placa de evaluación

TSW12D1620EVM-CVAL — Módulo de evaluación de receptor de banda ancha de calidad espacial ADC12D1620QML-SP

The TSW12D1620EVM-CVAL is a 1.5-GHz wideband receiver evaluation module (EVM) that includes ceramic engineering models of the amplifier, analog-to-digital converter (ADC), clocking, temperature sensor, microcontroller, and power solution. The board is best suited for (...)

Guía del usuario: PDF
Placa de evaluación

STARD-3P-STAR-TIGER — Fuente de alimentación STAR-Tiger de STAR-Dundee para SpaceFibre con circuitos integrados analógicos

STAR-Tiger es un conmutador de enrutamiento SpaceFibre de alto rendimiento que forma parte del proyecto Hi-SIDE de la Unión Europea y ha sido galardonado con el Premio a la Innovación en el Espacio del Foro Espacial Europeo. La tarjeta de alimentación de la unidad STAR-Tiger proporciona los raíles (...)

Kit de desarrollo

ALPHA-XILINX-KU060-SPACE — Placa Alpha Data® para Xilinx® Kintex® UltraScale™ XQRKU060 FPGA con potencia TI

This is a development kit for the Xilinx® XQRKU060 FPGA with industrial -1 speed grade. ADA-SDEV-KIT2 has a modular board design with a XRTC-compatible configuration module, two FMC connectors, DDR3 DRAM, system monitoring, and space-grade TI power management and temperature-sensing solutions.
Modelo de simulación

TPS50601A SIMPLIS Model

SLVME37.ZIP (19 KB) - SIMPLIS Model
Modelo de simulación

TPS50601A-SP PSpice Model (Rev. A)

SLVMCL4A.ZIP (20 KB) - PSpice Model
Modelo de simulación

TPS50601A-SP PSpice Transient Model (Rev. C)

SLVMCL3C.ZIP (289 KB) - PSpice Model
Modelo de simulación

TPS50601A-SP TINA-TI Average Reference Design

SLVMCM4.TSC (584 KB) - TINA-TI Reference Design
Modelo de simulación

TPS50601A-SP TINA-TI Average Spice Model

SLVMCM3.ZIP (5 KB) - TINA-TI Spice Model
Modelo de simulación

TPS50601A-SP TINA-TI Startup Transient Reference Design

SLVMCN2.TSC (855 KB) - TINA-TI Reference Design
Modelo de simulación

TPS50601A-SP TINA-TI Steady State Transient Reference Design

SLVMCN1.TSC (855 KB) - TINA-TI Reference Design
Modelo de simulación

TPS50601A-SP TINA-TI Transient Spice Model

SLVMCN0.ZIP (14 KB) - TINA-TI Spice Model
Modelo de simulación

TPS50601A-SP Worst Case Analysis Unencrypted PSpice Average Model

SLVMDC2.ZIP (43 KB) - PSpice Model
Herramienta de cálculo

SLVRBG4 TPS50601A-SP Buck Converter Calculator

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Convertidores de CA/CC y CC/CC (FET integrado)
TPS50601A-SP Convertidor reductor síncrono QMLV reforzado contra la radiación, entrada de 3 V a 7 V, 6 A
Diseños de referencia

TIDA-010191 — Diseño de referencia de sincronización de 15 GHz JESD204B multicanal de grado espacial

Las antenas de matriz en fase y la formación de haces digital son tecnologías clave que impulsarán el rendimiento de los futuros sistemas de comunicación por satélite de banda ancha y de imágenes de radar a bordo de vehículos espaciales. La formación de haces digital, a diferencia de la formación (...)
Design guide: PDF
Diseños de referencia

TIDA-070001 — Diseño de referencia de punto de carga (POL) de grado espacial y de 3 a 7 VIN, con entradas de eFuse

Redundancy is often employed in spacecraft applications to enhance reliability, this reference design shows how redundancy can be implemented at the input of a Point-of-Load (POL) supply using two TPS7H2201-SP radiation hardened eFuse load switches. Using two load switches allows for a primary and (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-070005 — Diseño de referencia de punto de carga (POL) de corriente compartido de grado espacial, de 3 a 7 VIN

This is a 24-A DC/DC space power hardware reference design.

As FPGA and ASIC technology advances, the core voltage requirements get lower but the current demand is larger. The newest space grade FPGAs and ASICS require low voltage and high currents for their core power consumption. These high (...)

Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
CFP (HKH) 20 Ultra Librarian
DIESALE (KGD)

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos