Herramienta de cálculo
TPS92314
Controlador de detección lateral primario fuera de línea con PFC en 8-SOIC
Hoja de datos
TPS92314
- Regulates LED Current Without Secondary Side Sensing
- Adaptive ON-time Control with Inherent PFC
- Critical-Conduction-Mode (CRM) with Zero-Current Detection (ZCD) for Valley Switching
- Programmable Switch Turn ON Delay
- Programmable Constant ON-Time (COT)
- Over Current Limit Options:
- TPS92314: 1.15V
- TPS92314A: 2.0V
- Advanced Over Current and Over Voltage Protection
- Internal Over-temperature Protection
- 8-Pin SOIC Package
All trademarks are the property of their respective owners.
The TPS92314/14A is an off-line controller specifically designed to drive high power LEDs for lighting applications. Features include adaptive constant on-time control and quasi-resonant switching. Resonant switching allows for a reduced EMI signature and increased system efficiency. Thus, the device introduces a low external parts count and high level of integration. The control algorithm of TPS92314/14A adjusts the on time with reference to the primary side inductor peak current and secondary side inductor discharge time dynamically, the response time of which is set by an external capacitor.
The over current protection is implemented by a cycle by cycle current limit of the primary inductor current. TPS92314A has a higher OCP threshold which is more suitable for universal line application and TPS92314 can optimize the system cost. Other supervisory features of the TPS92314/14A include VCC over voltage protection and under-voltage lockout, output LEDs over-voltage protection and controller thermal shutdown. The TPS92314/14A is available in 8-pin SOIC package.
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8 | Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TPS92314 Off-Line Primary Side Sensing Controller with PFC datasheet (Rev. B) | 01 may 2013 | |
| White paper | Common LED Functions and LED Driver Design Considerations | 21 sep 2020 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 25 jun 2018 | ||
| Application note | Tricolor control of TPS92314 based LED driver with toggling of main light switch | 11 dic 2015 | ||
| Application note | Low Cost, Single Inductor Non-Isolated AC/DC LED Driver Design using TPS92314 | 05 jun 2014 | ||
| EVM User's guide | Using the TPS92314A19120VEVM (Rev. A) | 07 feb 2013 | ||
| EVM User's guide | Using the TPS92314A19230VEVM (Rev. A) | 07 feb 2013 | ||
| Application note | TPS92314 THD design consideration | 16 ene 2013 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
TPS92314A19120VEVM — Controlador de detección lateral primaria fuera de línea con placa de módulo de evaluación PFC TPS92
Off-Line Primary Side Sensing Controller with PFC Evaluation Module Board LED Lighting Application
The TPS92314A19120VEVM evaluation module uses the TPS92314 as an isolated PFC flyback controller; more specifically it is an isolated primary-side controlled critical conduction mode PFC flyback. The (...) Guía del usuario: PDF
Placa de evaluación
TPS92314A19230VEVM — Controlador de detección lateral primaria fuera de línea con placa de módulo de evaluación PFC TPS92
Off-Line Primary Side Sensing Controller with PFC Evaluation Module Board LED Lighting Application
The TPS92314 family of general LED lighting PWM controllers contain control and drive circuitry required for off-line isolated or non-isolated LED lighting applications. The TPS92314A19230VEVM (...) Guía del usuario: PDF
Herramienta de simulación
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Diseños de referencia
PMP7672 — Diseño de referencia de controlador LED de 18 W y retorno regulado por el lado primario para disposi
This reference design describes an 18W power supply for driving a string of 13 LEDs (3.3V) at 420mA. The targeted application for this design is T8 fixtures transitioning from standard fluorescent tubes to more efficient LEDs. With an operating efficiency of over 87%, an input voltage range of 90 (...)
Diseños de referencia
PMP4362 — Diseño de referencia de controlador LED no aislado de 28 W para tubos T8 con entrada CA de 220 V
The reference design presents non-isolated LED driver solution for 28W T8 tube application. The valley switching mode controller TPS92314 is used to achieve high effiency (>93%) over input range. Inherent PFC achieves high PF>0.92. The design includes EMI driver board and LED driver board. The (...)
Diseños de referencia
PMP8010 — Diseño de referencia de controlador LED de retorno aislado de 8 W con PFC para A19
The main purpose of this reference design is to demonstrate a high performance and compact size offline flyback LED driver with PFC based on TPS92314. This LED driver is designed for converting an AC input to a regulated LED current. The operating conditions and performance of the reference design (...)
Diseños de referencia
PMP8014 — Diseño de referencia de controlador LED de retorno atenuable TRIAC con PFC para A19
The main purpose of this reference design is to demonstrate a high performance, compact size and triac Dimmable offline flyback LED driver with PFC based on TPS92314. This LED driver is designed for converting an AC input to a regulated LED current. The operating conditions and performance (...)
Diseños de referencia
PMP4347 — Diseño de referencia de controlador LED aislado de 42 V, 42 A, 18 W y alta eficiencia con entrada CA
This reference design demonstrates low cost, high PF LED Driver solution for T8 tube application, which includes single stage Flyback with Primary Side Regulation topology using TPS92314(SOIC-8). The input range is 85~265Vac and output is 38~42V 420mA. Typical 90% efficiency and PF>0.9.
Diseños de referencia
PMP8007 — Diseño de referencia de controlador LED no aislado de 21 W y CA de 220 V/120 V con PFC para aplicaci
The main purpose of this reference design is to demonstrate a very high performance offline LED driver with PFC based on TPS92314. This LED driver is designed for converting an AC input to a regulated LED current. The operating (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.