UCC27201
- Drives Two N-Channel MOSFETs in High-Side
and Low-Side Configuration - Negative Voltage Handling on HS (–5 V)
- Maximum Boot Voltage of 120 V
- Maximum VDD Voltage of 20 V
- On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode
- Greater than 1 MHz of Operation
- 20-ns Propagation Delay Times
- 3-A Sink and 3-A Source Output Currents
- 8-ns Rise and 7-ns Fall Time With 1000-pF Load
- 1-ns Delay Matching
- Undervoltage Lockout for High-Side and Low-Side
Driver - Specified from –40°C to 140°C
The UCC2720x family of high-frequency N-channel MOSFET drivers include a 120-V bootstrap diode and high-side and low-side drivers with independent inputs for maximum control flexibility. This allows for N-channel MOSFET control in half-bridge, full-bridge, two-switch forward, and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1 ns between the turnon and turnoff of each other.
An on-chip bootstrap diode eliminates the external discrete diodes. Undervoltage lockout is provided for both the high-side and the low-side drivers forcing the outputs low if the drive voltage is below the specified threshold.
Two versions of the UCC27200 are offered. The UCC27200 has high noise immune CMOS input thresholds while the UCC27201 has TTL compatible thresholds.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | UCC2720x, 120-V Boot, 3-A Peak, High Frequency, High-Side and Low-Side Driver datasheet (Rev. C) | PDF | HTML | 2016/04/28 |
Application note | Understanding and comparing peak current capability of gate drivers | PDF | HTML | 2021/03/30 | |
More literature | Troubleshooting gate drive circuits in automotive and industrial applications | 2021/03/23 | ||
Application brief | External Gate Resistor Selection Guide (Rev. A) | 2020/02/28 | ||
Application brief | Understanding Peak IOH and IOL Currents (Rev. A) | 2020/02/28 | ||
More literature | Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) | 2018/10/29 | ||
Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
UCC27201 and UCC27201A TINA-TI Transient Reference Design (Rev. A)
UCC27201 and UCC27201A TINA-TI Transient Spice Model (Rev. A)
UCC27201 and UCC27201A Unencrypted PSpice Transient Model
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TIDM-AUTO-DC-LED-LIGHTING — 오토모티브 헤드라이트 애플리케이션을 위한 다채널 고밀도 LED 제어
PMP4333 — 텔레콤(-8V@.25A)용 1KW 삼중 레일 절연 DC/DC 디지털 전원 공급 장치
PMP4320A — 텔레콤 애플리케이션을 위한 디지털 제어가 가능한 600W 하프 브릭 DC/DC 컨버터 레퍼런스 디자인
PMP8878 — 1/8 브릭 절연 DC/DC 텔레콤 전원 모듈 레퍼런스 디자인
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
HSOIC (DDA) | 8 | Ultra Librarian |
SOIC (D) | 8 | Ultra Librarian |
VSON (DRM) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.