首頁 電源管理 電源開關 eFuses 和熱插拔制器
首頁
電源管理
電源開關
eFuses 和熱插拔制器

LM5069

現行

具電源限制的 9-V 至 80-V 熱插拔控制器

立即訂購
產品規格表

LM5069

現行
產品規格表 立即訂購

產品詳細資料

FET External Vin (min) (V) 9 Vin (max) (V) 80 Vabsmax_cont (V) 100 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response Circuit breaker, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Fault output, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection Quiescent current (Iq) (typ) (A) 0.0013 Quiescent current (Iq) (max) (A) 0.0016
FET External Vin (min) (V) 9 Vin (max) (V) 80 Vabsmax_cont (V) 100 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response Circuit breaker, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Fault output, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection Quiescent current (Iq) (typ) (A) 0.0013 Quiescent current (Iq) (max) (A) 0.0016
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • Wide operating range: 9 V to 80 V
  • In-rush current limit for safe board insertion into live power sources
  • Programmable maximum power dissipation in the external pass device
  • Adjustable current limit
  • Circuit breaker function for severe overcurrent events
  • Internal high side charge pump and gate driver for external N-channel MOSFET
  • Adjustable undervoltage lockout (UVLO) and hysteresis
  • Adjustable overvoltage lockout (OVLO) and hysteresis
  • Initial insertion timer allows ringing and transients to subside after system connection
  • Programmable fault timer avoids nuisance trips
  • Active high open drain POWER GOOD output
  • Available in latched fault and automatic restart versions
  • 10-Pin VSSOP package
  • Wide operating range: 9 V to 80 V
  • In-rush current limit for safe board insertion into live power sources
  • Programmable maximum power dissipation in the external pass device
  • Adjustable current limit
  • Circuit breaker function for severe overcurrent events
  • Internal high side charge pump and gate driver for external N-channel MOSFET
  • Adjustable undervoltage lockout (UVLO) and hysteresis
  • Adjustable overvoltage lockout (OVLO) and hysteresis
  • Initial insertion timer allows ringing and transients to subside after system connection
  • Programmable fault timer avoids nuisance trips
  • Active high open drain POWER GOOD output
  • Available in latched fault and automatic restart versions
  • 10-Pin VSSOP package

The LM5069 positive hot swap controller provides intelligent control of the power supply connections during insertion and removal of circuit cards from a live system backplane or other hot power sources. The LM5069 provides in-rush current control to limit system voltage droop and transients. The current limit and power dissipation in the external series pass N-Channel MOSFET are programmable, ensuring operation within the Safe Operating Area (SOA). The POWER GOOD output indicates when the output voltage is within 1.25 V of the input voltage. The input undervoltage and overvoltage lockout levels and hysteresis are programmable, as well as the initial insertion delay time and fault detection time. The LM5069-1 latches off after a fault detection, while the LM5069-2 automatically restarts at a fixed duty cycle. LM5069 is available in a 10-pin VSSOP package.

The LM5069 positive hot swap controller provides intelligent control of the power supply connections during insertion and removal of circuit cards from a live system backplane or other hot power sources. The LM5069 provides in-rush current control to limit system voltage droop and transients. The current limit and power dissipation in the external series pass N-Channel MOSFET are programmable, ensuring operation within the Safe Operating Area (SOA). The POWER GOOD output indicates when the output voltage is within 1.25 V of the input voltage. The input undervoltage and overvoltage lockout levels and hysteresis are programmable, as well as the initial insertion delay time and fault detection time. The LM5069-1 latches off after a fault detection, while the LM5069-2 automatically restarts at a fixed duty cycle. LM5069 is available in a 10-pin VSSOP package.
filter 尋找其它 eFuses 和熱插拔制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TPS2490 現行 具有功率限制和閉鎖功能的 9-V 至 80-V 熱插拔控制器 Offers latch off feature
功能與所比較的裝置相似
TPS1663 現行 具有輸出功率限制的 4.5V 至 60V、31mΩ、0.6-6A eFuse Need a smaller solution? This device offers an integrated FET to reduce the solution size for 24V/6A applications.
TPS2660 現行 具有整合式輸入反向極性防護功能的 4.2-V 至 60-V、150mΩ、0.1-2.23A eFuse Need a smaller solution? This device offers integrated back-to-back FETs to reduce the solution size for 24V/2A applications.
TPS2663 現行 具有輸出功率限制和突波保護功能的 4.5V 至 60V、31mΩ、0.6A 至 6A eFuse Need a smaller solution? This device offers integrated back-to-back FETs to reduce the solution size for 24V/6A applications.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet LM5069 Positive High-Voltage Hot Swap/Inrush Current Controller w/Power Limiting datasheet (Rev. G) 2019年 11月 8日
Application note Parallel Operation of TPS2663 eFuses PDF | HTML 2020年 11月 16日
Technical article eFuses in factory automation: all-in-one system power protection PDF | HTML 2020年 9月 15日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Application note Accurate Thermal Calculations on the Back of a Napkin 2019年 6月 3日
Application note Basics of Power Switches (Rev. A) PDF | HTML 2019年 4月 26日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Technical article Who tampered with my PLC? Are industrial control systems too flexible? PDF | HTML 2016年 8月 5日
EVM User's guide EVM for LM5069 Surge Stopper and Reverse Voltage Protection 2014年 9月 13日
EVM User's guide AN-1326 LM5068 Evaluation Board (Rev. A) 2013年 5月 6日
EVM User's guide AN-1522 LM5069 Evaluation Board (Rev. B) 2013年 5月 6日
EVM User's guide AN-1723 LM5067 Evaluation Board (Rev. A) 2013年 5月 6日
Application note Output Voltage Clamping Using the LM5069 Hot Swap Controller (Rev. B) 2013年 5月 6日
Application note Surge Stopping and Reverse Voltage Protection with the LM5069 2013年 4月 11日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM5069EVAL — 具有功率限制的正高電壓熱插拔/突波電流控制器評估模組

The LM5069EVAL evaluation board provides the design engineer with a fully functional hot swap controller board designed for positive voltage systems. This board contains an LM5069-2, the auto restart version of this IC. This application note describes the various functions of the board, how to test (...)

使用指南: PDF
TI.com 無法提供
開發板

LM5069EVM-627 — LM5069 評估板

LM5069EVM-627 provides the design engineer with a fully functional hotswap controller evaluation module designed with surge voltage clamping, reverse voltage protection and reverse current protection. The EVM features LM5069-2, with auto restart. The LM5069EVM-627 User Guide describes board (...)

使用指南: PDF
TI.com 無法提供
模擬型號

LM5069-1 TINA-TI Transient Reference Design

SNVM598.ZIP (118 KB) - TINA-TI Reference Design
下載
模擬型號

LM5069-1 TINA-TI Transient Spice Model

SNVM597.ZIP (46 KB) - TINA-TI Spice Model
下載
模擬型號

LM5069-1 Unencrypted PSpice Transient Model Package (Rev. A)

SNVM374A.ZIP (78 KB) - PSpice Model
下載
模擬型號

LM5069-2 TINA-TI Transient Reference Design

SNVM652.ZIP (114 KB) - TINA-TI Reference Design
下載
模擬型號

LM5069-2 TINA-TI Transient Spice Model

SNVM651.ZIP (24 KB) - TINA-TI Spice Model
下載
模擬型號

LM5069-2 Unencrypted PSpice Transient Model Package (Rev. A)

SNVM373A.ZIP (75 KB) - PSpice Model
下載
計算工具

LM5069QUICK-CALC — LM5069 Design Calculator

The LM5069 calculator tool can help simplify the process of creating a hot swap design. Enter system requirements such as input voltage range, current, and output capacitance and the calculator will guide the user towards component selection. The tool may also be used to evaluate an existing (...)

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
LM5069 — 具電源限制的 9-V 至 80-V 熱插拔控制器
下載
計算工具

SNVR506 — LM5069 Design Calculator With FET Recommendation

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
LM5069 — 具電源限制的 9-V 至 80-V 熱插拔控制器
下載
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體

支援產品和硬體

此設計資源支援此類別中多數產品。

檢查產品詳細資料頁面以確認支援。
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求

許多 TI 參考設計包含 LM5069

使用我們的參考設計選擇工具，以檢視並找出最適合您的應用和參數的設計。

檢視參考設計
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片