首頁 電源管理 電源開關 eFuses 和熱插拔制器
首頁
電源管理
電源開關
eFuses 和熱插拔制器

TPS2421-2

現行

具熱關機功能的 3-V 至 20-V、33mΩ、1.8-5.5A eFuse

立即訂購
產品規格表

TPS2421-2

現行
產品規格表 立即訂購

產品詳細資料

FET Internal Ron (typ) (mΩ) 33 Vin (min) (V) 3 Vin (max) (V) 20 Vabsmax_cont (V) 25 Current limit (min) (A) 1.8 Current limit (max) (A) 5.5 Overcurrent response Power limiting, current limiting Fault response Auto-retry Soft start Adjustable Features Fault output, Power good signal UL recognition UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
FET Internal Ron (typ) (mΩ) 33 Vin (min) (V) 3 Vin (max) (V) 20 Vabsmax_cont (V) 25 Current limit (min) (A) 1.8 Current limit (max) (A) 5.5 Overcurrent response Power limiting, current limiting Fault response Auto-retry Soft start Adjustable Features Fault output, Power good signal UL recognition UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
HSOIC (DDA) 8 29.4 mm² 4.9 x 6
  • Integrated Pass MOSFET
  • Up to 20-V Bus Operation
  • Programmable Fault Current
  • Current Limit Proportionally Larger than Fault Current
  • Programmable Fault Timer
  • Internal MOSFET Power Limiting
  • Latch-Off on Fault (TPS2421-1) and Retry (TPS2421-2) Versions
  • SO-8 PowerPad™ Package
  • –40°C to +125°C Junction Temperature Range
  • UL2367 Recognized - File Number E169910
  • Integrated Pass MOSFET
  • Up to 20-V Bus Operation
  • Programmable Fault Current
  • Current Limit Proportionally Larger than Fault Current
  • Programmable Fault Timer
  • Internal MOSFET Power Limiting
  • Latch-Off on Fault (TPS2421-1) and Retry (TPS2421-2) Versions
  • SO-8 PowerPad™ Package
  • –40°C to +125°C Junction Temperature Range
  • UL2367 Recognized - File Number E169910

The TPS2421 device provides highly integrated hot swap power management and superior protection in applications where the load is powered by busses up to 20 V. The TPS2421 device is well suited to standard bus voltages as low as 3.3 V because of the maximum-UV turnon threshold of 2.9 V. These devices are very effective in systems where a voltage bus must be protected to prevent shorts from interrupting or damaging the unit. The TPS2421 device is an easy to use devices in an 8-pin PowerPad™ SO-8 package.

The TPS2421 device has multiple programmable protection features. Load protection is accomplished by a non-current limiting fault threshold, a hard current limit, and a fault timer. The current dual thresholds allow the system to draw short high current pulses, while the fault timer is running, without causing a voltage droop at the load. An example of this is a disk drive startup. This technique is ideal for loads that experience brief high demand, but benefit from protection levels in-line with their average current draw.

Hotswap MOSFET protection is provided by power limit circuitry which protects the internal MOSFET against SOA related failures.

The TPS2421 device is available in latch-off on fault (TPS2421-1) and retry on fault (TPS2421-2).

The TPS2421 device provides highly integrated hot swap power management and superior protection in applications where the load is powered by busses up to 20 V. The TPS2421 device is well suited to standard bus voltages as low as 3.3 V because of the maximum-UV turnon threshold of 2.9 V. These devices are very effective in systems where a voltage bus must be protected to prevent shorts from interrupting or damaging the unit. The TPS2421 device is an easy to use devices in an 8-pin PowerPad™ SO-8 package.

The TPS2421 device has multiple programmable protection features. Load protection is accomplished by a non-current limiting fault threshold, a hard current limit, and a fault timer. The current dual thresholds allow the system to draw short high current pulses, while the fault timer is running, without causing a voltage droop at the load. An example of this is a disk drive startup. This technique is ideal for loads that experience brief high demand, but benefit from protection levels in-line with their average current draw.

Hotswap MOSFET protection is provided by power limit circuitry which protects the internal MOSFET against SOA related failures.

The TPS2421 device is available in latch-off on fault (TPS2421-1) and retry on fault (TPS2421-2).
filter 尋找其它 eFuses 和熱插拔制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TPS25946 現行 具雙向電流支援的 2.7-V 至 23-V、5.5-A、28-mΩ eFuse Smaller package, better specifications but no circuit breaker response for over-current condition.
TPS2597 現行 具有精確電流監視器和暫態過電流消隱功能的 2.7-V – 23-V、7-A、9.8-mΩ eFuse eFuse with higher current, lower RON, and smaller package for better power density.
TPS25981 現行 具有瞬態過流消隱定時器的 2.7-V 至 16-V、10-A、6-mΩ eFuse eFuse with higher current, lower RON and smaller package option.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet TPS2421-x 5-A, 20-V Integrated FET Hot Swap datasheet (Rev. K) PDF | HTML 2019年 5月 15日
Certificate TPS2421-2 UL Certificate of Compliance IEC 60950-1 2020年 4月 24日
Functional safety information eFuse: Safety Certification and why it Matters 2020年 3月 18日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Application note Basics of eFuses (Rev. A) 2018年 4月 5日
Application note Power Multiplexing Using Load Switches and eFuses (Rev. A) 2017年 6月 20日
User guide TPS2420 Reference Design 2009年 3月 27日
User guide Using the TPS2420, TPS2421-1, TPS2421-2 2009年 1月 6日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS2421-2EVM-03 — TPS2421-2 熱插拔控制器評估模組

The TPS2421-2EVM-03 is a 3-V to 18-V module using the TPS2421-2 hot swap controller with integrated MOSFET. At power on, the output is power limited to control inrush current and protect the MOSFET. On an over-current condition, the controller interrupts power to the load at high speed and signals (...)

使用指南: PDF
TI.com 無法提供
計算工具

SLUC427 — TPS2421 Design Calculator Tool

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
TPS2421-1 — 3-V 至 20-V、33mΩ、1.8-5.5A eFuse TPS2421-2 — 具熱關機功能的 3-V 至 20-V、33mΩ、1.8-5.5A eFuse
下載
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體

支援產品和硬體

此設計資源支援此類別中多數產品。

檢查產品詳細資料頁面以確認支援。
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HSOIC (DDA) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片