TPS25961
- Wide input voltage range: 2.7V to 19V
- 21-V absolute maximum
- Low on-resistance: Ron = 106-mΩ (typical)
- Active high enable input with adjustable undervoltage lockout (UVLO)
- Overvoltage protection with a response time of 1.3µs (typical)
- Fixed internal threshold: 5.98 V (typical)
- Adjustable threshold using external resistor divider
- Overcurrent protection:
- Adjustable current limit threshold: 0.1A to 2A
- Current limit accuracy:
- ±20% (typical) across current range
- ±18% (maximum) at 1.45-A current limit, TA = 25°C
- Short-circuit protection with a response time of 5µs (typical)
- Output slew rate control (dVdt): 5.17 V/ms (typical)
- Overtemperature protection (OTP)
- Auto-retry after fault
- Low quiescent current: 130 µA (typical)
- UL 2367 recognition (pending)
- IEC 62368 CB certification (pending)
- Small footprint: 2 mm × 2 mm SON package
The TPS25961 eFuse (integrated FET hot-swap device) is a highly integrated circuit protection and power management solution in a small package. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short-circuits, voltage surges, and excessive inrush current. Output current limit level can be set with a single external resistor. Inrush current is managed using output slew rate control internally. To protect an input overvoltage condition, the device provides an option to externally set a user-defined overvoltage cutoff threshold or use a fixed internal threshold.
The devices are characterized for operation over a junction temperature range of –40 °C to +125 °C.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS25961 2.7-V–19-V, 106-mΩ, eFuse With Adjustable Current Limit and Short-Circuit Protection datasheet | PDF | HTML | 2022年 12月 5日 |
Application brief | Performance, Space, and Cost Optimized Protection Using TPS25961 | PDF | HTML | 2023年 1月 25日 | |
EVM User's guide | TPS25961EVM: Evaluation Module for TPS25961 eFuse | PDF | HTML | 2022年 8月 29日 | |
Certificate | TPS25961EVM EU RoHS Declaration of Conformity (DoC) | 2022年 7月 29日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS25961EVM — 適用於 2.7-V 至 19-V 2-A 100-mΩ eFuse 的 TPS25961 評估模組
TPS25961EVM 允許對 TPS25961 eFuse 進行參考電路評估。TPS25961 裝置為一搭載整合式 100-mΩ FET 及突波電流防護、可編程過低電壓與過高電壓防護及電流限制的 2.7-V 至 19-V,2 A eFuse。
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
支援產品和硬體
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WSON (DRV) | 6 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。