首頁 電源管理 電源開關 高壓側開關控制器
首頁
電源管理
電源開關
高壓側開關控制器
最新

TPS4812-Q1

現行

具有雙向電流監控、I2t 與診斷功能的車用 100V 低 IQ 高壓側驅動器

立即訂購
產品規格表

TPS4812-Q1

現行
產品規格表 立即訂購

產品詳細資料

Operating voltage (max) (V) 80 Operating voltage (min) (V) 3.5 Reverse polarity protection (V) -65 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Current sense accuracy +/-2% at 30-mV VSNS Short-circuit protection response time (µs) 6 Features Automatic load wake-up, Bi-directional, Fault Diagnostics, High-side RSNS, Over Temperature Protection, Overcurrent protection with adjustable delay, Precharge FET driver, Short circuit protection, Undervoltage Lock Out (UVLO), VDS Sensing Operating temperature range (°C) -40 to 125 Rating Automotive
Operating voltage (max) (V) 80 Operating voltage (min) (V) 3.5 Reverse polarity protection (V) -65 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Current sense accuracy +/-2% at 30-mV VSNS Short-circuit protection response time (µs) 6 Features Automatic load wake-up, Bi-directional, Fault Diagnostics, High-side RSNS, Over Temperature Protection, Overcurrent protection with adjustable delay, Precharge FET driver, Short circuit protection, Undervoltage Lock Out (UVLO), VDS Sensing Operating temperature range (°C) -40 to 125 Rating Automotive
VQFN (RGE) 23 16 mm² 4 x 4

  • AEC-Q100 automotive qualified for grade 1 temperature
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input and output protection down to –65V
  • Integrated 12V charge pump
  • Low IQ = 20µA in low power mode (LPM = Low)
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Dual gate drive: GATE: 0.5A src/2A sink G: 100µA src/0.39A sink
  • Accurate I2t overcurrent protection (IOC) with adjustable circuit breaker timer (I2t)
  • Accurate and fast (5µs) short-circuit protection
  • Fast transition (5µs) from low power mode to active mode using adjustable load wakeup threshold or LPM trigger with WAKE indication
  • Accurate analog bi-directional current monitor output (IMON, I_DIR): ±2% at 30mV VSNS
  • NTC based overtemperature sensing (TMP) and monitoring output (ITMPO)
  • Fault indication (FLT) during short circuit fault, I2t, charge pump UVLO, overtemperature
  • TPS48120-Q1 (I2t enabled), TPS48121-Q1 (I2t disabled)
  • Accurate (±2%) and adjustable undervoltage lockout (UVLO)

  • AEC-Q100 automotive qualified for grade 1 temperature
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input and output protection down to –65V
  • Integrated 12V charge pump
  • Low IQ = 20µA in low power mode (LPM = Low)
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Dual gate drive: GATE: 0.5A src/2A sink G: 100µA src/0.39A sink
  • Accurate I2t overcurrent protection (IOC) with adjustable circuit breaker timer (I2t)
  • Accurate and fast (5µs) short-circuit protection
  • Fast transition (5µs) from low power mode to active mode using adjustable load wakeup threshold or LPM trigger with WAKE indication
  • Accurate analog bi-directional current monitor output (IMON, I_DIR): ±2% at 30mV VSNS
  • NTC based overtemperature sensing (TMP) and monitoring output (ITMPO)
  • Fault indication (FLT) during short circuit fault, I2t, charge pump UVLO, overtemperature
  • TPS48120-Q1 (I2t enabled), TPS48121-Q1 (I2t disabled)
  • Accurate (±2%) and adjustable undervoltage lockout (UVLO)

TPS4812-Q1 is a family of low IQ smart high side drivers with protection and diagnostics. With wide operating voltage range of 3.5V to 95V, 100V absmax the device is suitable for 12V, 24V and 48V automotive system designs.

It has two integrated gate drives with 0.5A source and 2A sink (GATE) and 100µA source and 0.39A sink (G). With LPM Low, the low power path is kept ON and the main FETs are turned OFF with IQ of 20µA (typ). Auto Load wakeup threshold adjusted using RBYPASS resistor placed across DRN and CS2–. IQ reduces to 1µA (typ) with EN/UVLO low.

The device has accurate bi-directional current sensing (±2%) output (IMON, I_DIR) with adjustable I2t based overcurrent and short circuit protection using an external RSNS resistor and FLT indication. Auto-retry and latch-off fault behavior can be configured. The device also has NTC based temperature sensing (TMP) and monitoring output (ITMPO) output for overtemperature detection of external FETs.

The TPS4812-Q1 is available in 23-pin VQFN package.

TPS4812-Q1 is a family of low IQ smart high side drivers with protection and diagnostics. With wide operating voltage range of 3.5V to 95V, 100V absmax the device is suitable for 12V, 24V and 48V automotive system designs.

It has two integrated gate drives with 0.5A source and 2A sink (GATE) and 100µA source and 0.39A sink (G). With LPM Low, the low power path is kept ON and the main FETs are turned OFF with IQ of 20µA (typ). Auto Load wakeup threshold adjusted using RBYPASS resistor placed across DRN and CS2–. IQ reduces to 1µA (typ) with EN/UVLO low.

The device has accurate bi-directional current sensing (±2%) output (IMON, I_DIR) with adjustable I2t based overcurrent and short circuit protection using an external RSNS resistor and FLT indication. Auto-retry and latch-off fault behavior can be configured. The device also has NTC based temperature sensing (TMP) and monitoring output (ITMPO) output for overtemperature detection of external FETs.

The TPS4812-Q1 is available in 23-pin VQFN package.
filter 尋找其它 高壓側開關控制器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS4812-Q1 100V Low IQ Automotive High-Side Switch Controller With Bi-directional IMON, Low Power Mode, Load Wakeup, I2 t, and Diagnostics datasheet PDF | HTML 2024年 12月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS1214Q1EVM — TPS1214-Q1 評估模組

TPS1214-Q1 評估模組 (EVM) 可對 TPS1214-Q1 智慧型高壓側驅動器進行參考電路評估。此 EVM 可完整配置高壓側驅動器，以及各種參數，例如過電流保護、短路保護和可配置 I2T 控制。此 EVM 可從跨接器設定各種閾值，以便在不同閾值和配置設定間輕鬆切換。
使用指南: PDF | HTML
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 23 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片