GUI para el módulo de evaluación (EVM)
TLC6C5716-Q1
Controlador LED RGB de corriente constante de diagnóstico completo y 16 canales para automoción
Hoja de datos
TLC6C5716-Q1
- AEC-Q100 Qualified for Automotive Applications
- Device Temperature Grade 1: –40°C to 125°C, TA
- 16 Constant-Current-Sink Output Channels
- 50-mA Maximum Output Current
- 8-V Maximum Output Voltage
- Two Output Groups: OUTRn, OUTBn
- Output Current Adjustment
- 7-Bit Dot Correction (DC) for Each Channel
- 8-Bit Brightness Control (BC) for Each Group
- Integrated PWM Grayscale Generator
- PWM Dimming for Each Individual Channel
- Adjustable Global Grayscale Mode: 12-Bit, 10-Bit, 8-Bit
- Protection and Diagnostics
- LED-Open Detection (LOD), LED-Short Detection (LSD), Output Short-to-GND Detection (OSD)
- Adjacent-Pin Short (APS) Detection
- Pre-Thermal Warning (PTW), Thermal Shutdown (TSD)
- IREF Resistor Open- (IOF) and Short-Detection (ISF) and -Protection
- Negate Bit Toggle for GCLK Error Detect and LOD_LSD Register Error Check
- LOD_LSD Circuit Self-Test
- Programmable Output Slew Rate
- Output Channel Group Delay
- Serial Data Interface
There are automotive applications for indicators and for LCD local-dimming backlighting. For these applications, more persons think multi-channel constant-current LED drivers are necessary. The requirement is to get the same intensity and color temperature of LEDs. For system-level safety, it is necessary that the LED drivers can sense faults.
The TLC6C5716-Q1 device is an automotive 16-channel constant-current RGB LED driver that can do tests on the LEDs. The TLC6C5716-Q1 device supplies a maximum of 50-mA output current set by an external resistor. The device has a 7-bit dot correction with two ranges for each output. The device also has an 8-bit intensity control for the outputs of each color group.
A 12-,10-, or 8-bit grayscale control adjusts the intensity of each output. The device has circuits that sense faults in the system, including LED faults, adjacent-pin short faults, reference-resistor faults, and more. A slew rate control has 2 positions for adjustment to get the largest decrease in system noise. There is an interval between the changes of output level from one LED group to a different one. This interval helps to decrease the starting electrical current. The SDI and SDO pins let more than one device be connected in series for control through 1 serial interface.
Productos similares que pueden interesarle
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3 | Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TLC6C5716-Q1 Automotive 16-Channel, Full Diagnostics, Constant-Current LED Driver datasheet (Rev. A) | PDF | HTML | 20 ago 2018 |
| Functional safety information | TLC6C5716-Q1 Functional Safety, FIT Rate, and Failure Mode Distribution | PDF | HTML | 23 feb 2023 | |
| EVM User's guide | TLC6C5716-Q1 Evaluation Module User's Guide | 14 may 2018 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
TLC6C5716EVM — Módulo de evaluación TLC6C5716-Q1 para controlador LED de corriente constante de 16 canales
The TLC6C5716EVM is designed to be controlled with the TLC65716EVM GUI via a USB2ANY communication tool. The TLC6C5716EVM can be powered by a micro-USB supply with a PC USB port. The TLC6C5716EVM GUI is designed to demonstrate the TLC6C5716-Q1 features.
Guía del usuario: PDF
Modelo de simulación
TLC6C5716-Q1 Unencrypted PSpice Transient Model
SLVMCI8.ZIP (23 KB) - PSpice Model
Herramienta de simulación
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Diseños de referencia
TIDA-020010 — Diseño de referencia de control HVAC para automoción con HMI
This reference design offers a cost-effective solution for a heating, ventilation, and air conditioning (HVAC) human-machine interface (HMI) application. This reference design incorporates a synchronous step-down converter, multiple channel half-bridge motor driver for brushed DC motors (BDC), (...)
Diseños de referencia
TIDA-020001 — Diseño de referencia de retroiluminación de atenuación local y 144 zonas para automoción
This local dimming backlight reference design conserves power, extends the life of liquid-crystal displays (LCDs), and enhances automotive display quality through high dynamic range (HDR) or localized dimming technology. Seven multi-channel constant-current LED drivers allow for 144-zone localized (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| HTSSOP (DAP) | 38 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.