계산 툴
MODULATOR-TIMING-EXCEL-CALC — Isolated Modulator Digital Communication Timing Calculation Tool
Use this excel calculator to confirm the correct clock setup and hold timing compensation method with an isolated modulator and SDFM controller.
AMC1303M0520
- Pin-compatible family optimized for shunt-resistor-based current measurements:
- ±50mV or ±250mV input voltage ranges
- Manchester-coded or uncoded bitstream options
- 10MHz and 20MHz clock options
- Excellent DC performance:
- Offset error: ±50µV or ±100µV (max)
- Offset drift: ±1µV/°C (max)
- Gain error: ±0.2% (max)
- Gain drift: ±40ppm/°C (max)
- Transient immunity: 100kV/µs (typ)
- System-level diagnostic features
- Safety-related certifications:
- 7000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5000VRMS isolation for 1 minute per UL1577
- CAN/CSA no. 5A-component acceptance service notice and IEC 62368-1 end equipment standard
- Fully specified over the extended industrial temperature range: –40°C to +125°C
The AMC1303 (AMC1303x0510, AMC1303x0520, AMC1303x2510, and AMC1303x2520) is a family of precision, isolated delta-sigma (ΔΣ) modulators. The output is separated from the input circuitry by a capacitive isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation of up to 7000VPK according to the DIN EN IEC 60747-17 (VDE 0884-17) and UL1577 standards, and supports a working voltage up to 1.5kVRMS
The input of the AMC1303 device is optimized for direct connection to shunt resistors or other, low-impedance signal sources. The small size, high DC accuracy, low temperature drift, and high common-mode transient immunity (CMTI) support accurate isolated current sensing in noisy high-voltage applications.
The output bitstream of the AMC1303 is synchronized to the internally generated clock and is Manchester coded (AMC1303Ex) or uncoded (AMC1303Mx). Combined with a digital low-pass filter (such as a Sinc-filter) the device achieves 85dB of dynamic range at an effective output data rate of 78kSPS.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
7개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | AMC1303x Small, High-Precision, Reinforced Isolated Delta-Sigma Modulators With Internal Clock datasheet (Rev. D) | PDF | HTML | 2024/10/29 |
| Application brief | 절연 데이터 컨버터를 위한 션트 레지스터 선택 | PDF | HTML | 2024/08/15 | |
| White paper | 절연 증폭기와 절연 모듈레이터 비교 (Rev. B) | PDF | HTML | 2024/07/02 | |
| Certificate | VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. S) | 2024/02/29 | ||
| Application note | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023/03/29 | |
| Certificate | UL Certificate of Compliance Vol4 Sec5 E181974 (Rev. A) | 2023/01/23 | ||
| Certificate | TUEV Technical Report No. 713203936 | 2021/10/20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
AMC1303EVM — AMC1303 소형, 고정밀, 강화 절연 모듈레이터 평가 모듈
The AMC1303 devices are 1-bit modulators with an output buffer separated from the input interface circuitry by a silicon dioxide (SiO2) isolation barrier. The isolation barrier provides galvanic isolation of up to 8000 VPEAK. When used in combination with an FPGA or other digital filter, AMC1303 (...)
사용 설명서: PDF
계산 툴
SBAR010 — Delta Sigma Modulator Filter Calculator
지원되는 제품 및 하드웨어
제품
절연 ADC
정밀 ADC
하드웨어 개발
평가 보드
레퍼런스 디자인
TIDA-01349 — 단일 패키지 6채널 디지털 아이솔레이터를 사용하는 인버터용 IPM 인터페이스 레퍼런스 설계
This reference design realizes a three-phase inverter subsystem for AC inverter drives and servo drives using an intelligent power module (IPM). Reinforced isolation is present between the microcontroller (MCU) and the IPM-based power stage. The PWM signals are isolated using the single-package, (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (DWV) | 8 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.