設計工具
TPS281C100EVM-HW-FILES — TPS281C100EVM-HW-FILES
This hardware package contains the Altium board/model files for both the schematic and layout of the TPS281C100EVM evaluation board.
TPS281C100
- Wide operating voltage range: 6V to 60V
- Low RON: 83mΩ typ, 168mΩ max
- Improve system level reliability through adjustable current limiting
- 1A to 5A (fixed 0.5A)
- Accurate current sensing
- ±4% at 1A in standard sense mode
- ±12.5% at 4mA in high accuracy sense mode
- Integrated inductive discharge clamp > 64V
- Low quiescent current (Iq) of < 1.5mA
- Operating junction temperature: –40 to 125°C
- Input control: 1.8V, 3.3V, and 5V logic compatible
- Integrated fault sense voltage scaling for ADC protection
- Open-load detection in off-state
- Thermal shutdown and swing detection
- Enhanced electrical fast transient (EFT) according to IEC61000-4-4
- Device stays OFF with 22nF output capacitance, ±2kV EFT with DIAG_EN low
- 14-pin thermally-enhanced TSSOP package
- 12-pin thermally-enhanced WSON package
TPS281C100 is a single channel smart high-side switch designed to meet the requirements of industrial control systems. The low RON minimizes device power dissipation, driving a wide range of output load current up to 60V DC operation range improves system robustness.
The device integrates protection features such as thermal shut down, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS281C100 implements an adjustable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. In order to drive high inrush current loads such as lamps or fast charging capacitive loads, TPS281C100A implements an inrush current time period with a higher level of allowed current. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection enabling better predictive maintenance.
TPS281C100 is available in a small 14-pin, 4.4mm × 5mm HTSSOP leaded package with 0.65mm pin pitch and 12-pin, 4mm × 4mm WSON with 0.5mm pin pitch minimizing the PCB footprint.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS281C100x 60V, 100mΩ, Single-Channel Smart High-Side Switch datasheet (Rev. A) | PDF | HTML | 2024年 9月 30日 |
| Certificate | TPS281C100EVM EU Declaration of Conformity (DoC) | 2023年 12月 18日 | ||
| EVM User's guide | TPS281C100 Evaluation Module User's Guide | PDF | HTML | 2023年 12月 7日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS281C100EVM — TPS281C100 評估模組
TPS281C100 評估模組 (EVM) 讓工程師能夠評估 TPS281C100 高壓側開關的完整性能和功能。此 EVM 既可用作具有附加電壓電源和輸出負載的獨立板，也可以使用標準化的 BoosterPack™ 插入式模組接頭與底層微控制器結合使用。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DNT) | 12 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。