首頁 電源管理 電源開關 低壓側開關
首頁
電源管理
電源開關
低壓側開關

ULN2003A

現行

50V 7 通道達靈頓電晶體陣列

立即訂購
產品規格表

ULN2003A

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 70 Drivers per package 7 Switching voltage (max) (V) 50 Output voltage (max) (V) 50 Peak output current (A) 0.5 Delay time (typ) (ns) 250 Input compatibility CMOS, TTL Vol at lowest spec current (typ) (mV) 900 Iout/ch (max) (mA) 500 Iout_off (typ) (µA) 50
Rating Catalog Operating temperature range (°C) -40 to 70 Drivers per package 7 Switching voltage (max) (V) 50 Output voltage (max) (V) 50 Peak output current (A) 0.5 Delay time (typ) (ns) 250 Input compatibility CMOS, TTL Vol at lowest spec current (typ) (mV) 900 Iout/ch (max) (mA) 500 Iout_off (typ) (µA) 50
PDIP (N) 16 181.42 mm² 19.3 x 9.4 SOIC (D) 16 59.4 mm² 9.9 x 6 SOP (NS) 16 79.56 mm² 10.2 x 7.8 SOT-23-THN (DYY) 16 8.4 mm² 4.2 x 2 TSSOP (PW) 16 32 mm² 5 x 6.4
  • 500mA-rated collector current (single output)
  • High-voltage outputs: 50V
  • Output clamp diodes
  • Inputs compatible with various types of logic
  • Relay-driver applications
  • 500mA-rated collector current (single output)
  • High-voltage outputs: 50V
  • Output clamp diodes
  • Inputs compatible with various types of logic
  • Relay-driver applications

The ULx200xA devices are high-voltage, high-current Darlington transistor arrays. Each consists of seven NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads.

The collector-current rating of a single Darlington pair is 500mA. The Darlington pairs can be paralleled for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers. For 100V (otherwise interchangeable) versions of the ULx2003A devices, see the SLRS023 data sheet for the SN75468 and SN75469 devices.

The ULN2002A device is designed specifically for use with 14V to 25V PMOS devices. Each input of this device has a Zener diode and resistor in series to control the input current to a safe limit. The ULx2003A devices have a 2.7kΩ series base resistor for each Darlington pair for operation directly with TTL or 5V CMOS devices.

The ULx2004A devices have a 10.5kΩ series base resistor to allow operation directly from CMOS devices that use supply voltages of 6V to 15V. The required input current of the ULx2004A device is below that of the ULx2003A devices, and the required voltage is less than that required by the ULN2002A device.

The ULx200xA devices are high-voltage, high-current Darlington transistor arrays. Each consists of seven NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads.

The collector-current rating of a single Darlington pair is 500mA. The Darlington pairs can be paralleled for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers. For 100V (otherwise interchangeable) versions of the ULx2003A devices, see the SLRS023 data sheet for the SN75468 and SN75469 devices.

The ULN2002A device is designed specifically for use with 14V to 25V PMOS devices. Each input of this device has a Zener diode and resistor in series to control the input current to a safe limit. The ULx2003A devices have a 2.7kΩ series base resistor for each Darlington pair for operation directly with TTL or 5V CMOS devices.

The ULx2004A devices have a 10.5kΩ series base resistor to allow operation directly from CMOS devices that use supply voltages of 6V to 15V. The required input current of the ULx2004A device is below that of the ULx2003A devices, and the required voltage is less than that required by the ULN2002A device.
filter 尋找其它 低壓側開關
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8
類型 標題 日期
* Data sheet ULN200x, ULQ200x High-Voltage, High-Current Darlington Transistor Arrays datasheet (Rev. S) PDF | HTML 2024年 6月 12日
EVM User's guide ULN2003AD Evaluation Module User's Guide PDF | HTML 2024年 2月 14日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Application note Basics of Power Switches (Rev. A) PDF | HTML 2019年 4月 26日
Application note Stepper Motor Driving with Peripheral Drivers (Rev. A) PDF | HTML 2016年 12月 2日
Technical article How to create a dynamic power solution for stepper motors, relays and LEDs PDF | HTML 2016年 11月 1日
User guide BOOSTXL-ULN2003 Dual Stepper Motor Driver BoosterPack Hardware 2016年 4月 12日
Application note Improved Thermal Dissipation and Energy Efficiency for Peripheral Driving 2014年 10月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ULN2003ADEVM — ULN2003A 評估模組

ULN2003A 評估模組 (EVM) 可用於讓硬體工程師評估 ULN2003A 達靈頓電晶體陣列的完整性能與功能。EVM 的設計可做為獨立電路板使用，並具有附加電壓供應和輸出負載，以在設計為較佳應用電源系統的一部分之前，用於測試與評估 ULN2003A。此 EVM 已安裝 ULN2003A 的 SOIC (D 版本)。

使用指南: PDF | HTML
View Options
開發板

BRDWY-3P-BA620XX — 適用按摩椅應用的 Broadway Technology Jiangsu BA620XX 控制板

Broadway Technology (Jiangsu) BA620XX 按摩椅控制電路板以 MSPM0G1106 裝置作為核心 MCU，控制 DRV8251 及其他馬達驅動裝置，並為 2D 與 3D 按摩椅提供核心電子控制系統。

BA62038 支援 5 向馬達、氣泵、加熱裝置控制、10 向氣閥控制及透過序列通訊的多通道控制電路板。

BA62042 支援 8 向馬達、氣泵、加熱裝置控制、8 向氣閥控制及透過序列通訊的多通道控制電路板。

從：Broadway Technology (Jiangsu) Co., Ltd.
View Options
開發套件

TIEVM-HV-1PH-DCAC — 具有電壓源和併聯模式的單相逆變器開發套件

This reference design implements single phase inverter (DC-AC) control using the C2000™ F2837xD and F28004x microcontrollers. Design supports two modes of operation for the inverter. First is voltage source mode using an output LC filter, this control mode is typically used in Uninterrupted (...)
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

TIDM-HV-1PH-DCAC — 具有電壓來源和併聯模式的單相逆變器參考設計

此參考設計使用 C2000™ F2837xD 和 F28004x 微控制器，實作單相逆變器 (DC-AC) 控制。設計支援逆變器的兩種操作模式。第一個是使用輸出 LC 濾波器的電壓來源模式。此控制模式通常用於不斷電電源供應器 (UPS)。第二個則是搭載輸出 LCL 濾波器的併聯模式，通常用於太陽能逆變器。powerSUITE 架構支援適用於設計的韌體，可利用 Solution Adapter 進行修改，並利用 Compensation Designer 和 SFRA 調整控制迴路。高效率，低 THD 和直覺式軟體，讓此設計對於從事 UPS 逆變器設計以及 PV (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01600 — 適用於伺服驅動器與機器人的智慧型煞車控制與診斷參考設計

This reference design implements safe brake control functionality in servo drives as per IEC EN 61800-5-2 by providing two channel output signals to control an external holding brake. The holding brake will be latched when the power supply is cut off and released when voltage is applied to the (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01329 — 用於 HVAC 散熱孔和馬達控制的可配置步進驅動器參考設計

This reference design provides a flexible stepper motor system designed to drive up to two stepper motors, or 8 peripherals, while reducing the number of GPIOs needed from the host controller reducing overall cost. The system is suitable for applications requiring stepper motors or coils up to (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
PDIP (N) 16 Ultra Librarian
SOIC (D) 16 Ultra Librarian
SOP (NS) 16 Ultra Librarian
SOT-23-THN (DYY) 16 Ultra Librarian
TSSOP (PW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片