首頁 電源管理 電源開關 eFuses 和熱插拔制器
首頁
電源管理
電源開關
eFuses 和熱插拔制器

TPS2595

現行

採用小型 WSON 封裝且具有過電壓保護的 2.7-V 至 18-V、34mΩ、0.5-4A eFuse

立即訂購
產品規格表

TPS2595

現行
產品規格表 立即訂購

產品詳細資料

FET Internal Ron (typ) (mΩ) 34 Vin (min) (V) 2.7, 3 Vin (max) (V) 18 Vabsmax_cont (V) 20 Current limit (min) (A) 0.5 Current limit (max) (A) 4 Overcurrent response Current limiting, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp, Cut-off Features Current monitoring, Fault output, Quick output discharge UL recognition IEC62368, UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.000175 Quiescent current (Iq) (max) (A) 0.00025
FET Internal Ron (typ) (mΩ) 34 Vin (min) (V) 2.7, 3 Vin (max) (V) 18 Vabsmax_cont (V) 20 Current limit (min) (A) 0.5 Current limit (max) (A) 4 Overcurrent response Current limiting, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp, Cut-off Features Current monitoring, Fault output, Quick output discharge UL recognition IEC62368, UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.000175 Quiescent current (Iq) (max) (A) 0.00025
WSON (DSG) 8 4 mm² 2 x 2
  • Wide Input Voltage Range: 2.7 V to 18 V
    • 20 V Absolute Maximum
    • 3 V to 18 V for TPS2595x5 Version
  • Low On-Resistance: RON = 34 mΩ (Typical)
  • Fast Overvoltage Protection Clamp (3.8-V, 5.7-V, and 13.7-V options) With a Response Time of 5 µs (Typical)
  • TPS2595x0, TPS2595x1, TPS2595x5: Active High Enable Input With Adjustable Undervoltage Lockout (UVLO)
  • TPS2595x3: Active Low Enable Input With Adjustable Overvoltage Lockout (OVLO)
  • Adjustable Current Limit With Load Current Monitor Output (ILM)
    • Current Range: 0.5 A to 4 A
    • Current Limit Accuracy: ±7.5%
  • Adjustable Output Slew Rate Control (dVdt)
  • Over Temperature Protection (OTP)
  • Fault Indication Pin (FLT )
  • UL 2367 Recognition – File No. E169910
    • RILM >= 487 Ω (4.42 A maximum)
  • IEC 62368-1 Certified
  • Safe During Single Point Failure Test (IEC 62368-1)
    • ILM Pin Open/Short Detection
  • Wide Input Voltage Range: 2.7 V to 18 V
    • 20 V Absolute Maximum
    • 3 V to 18 V for TPS2595x5 Version
  • Low On-Resistance: RON = 34 mΩ (Typical)
  • Fast Overvoltage Protection Clamp (3.8-V, 5.7-V, and 13.7-V options) With a Response Time of 5 µs (Typical)
  • TPS2595x0, TPS2595x1, TPS2595x5: Active High Enable Input With Adjustable Undervoltage Lockout (UVLO)
  • TPS2595x3: Active Low Enable Input With Adjustable Overvoltage Lockout (OVLO)
  • Adjustable Current Limit With Load Current Monitor Output (ILM)
    • Current Range: 0.5 A to 4 A
    • Current Limit Accuracy: ±7.5%
  • Adjustable Output Slew Rate Control (dVdt)
  • Over Temperature Protection (OTP)
  • Fault Indication Pin (FLT )
  • UL 2367 Recognition – File No. E169910
    • RILM >= 487 Ω (4.42 A maximum)
  • IEC 62368-1 Certified
  • Safe During Single Point Failure Test (IEC 62368-1)
    • ILM Pin Open/Short Detection

The TPS2595xx family of eFuses (integrated FET hot swap devices) is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges, and excessive inrush current.

Output current limit level can be set with a single external resistor. It is also possible to get an accurate sense of the output load current by measuring the voltage drop across the current limit resistor. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Overvoltage events are quickly limited by internal clamping circuits to a safe fixed maximum, with no external components required. The TPS259573 variant provides an option to set a user-defined overvoltage cutoff threshold.

Quick output discharge function can be implemented in the TPS2595x5 variants by connecting the OUT pin to the QOD pin.

The devices are characterized for operation over the temperature range of –40°C to +125°C.

The TPS2595xx family of eFuses (integrated FET hot swap devices) is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges, and excessive inrush current.

Output current limit level can be set with a single external resistor. It is also possible to get an accurate sense of the output load current by measuring the voltage drop across the current limit resistor. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Overvoltage events are quickly limited by internal clamping circuits to a safe fixed maximum, with no external components required. The TPS259573 variant provides an option to set a user-defined overvoltage cutoff threshold.

Quick output discharge function can be implemented in the TPS2595x5 variants by connecting the OUT pin to the QOD pin.

The devices are characterized for operation over the temperature range of –40°C to +125°C.
filter 尋找其它 eFuses 和熱插拔制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TPS25961 現行 具有過電壓、過電流和短路保護的 2.7-V 至 19-V 100-mΩ eFuse Lower current
功能與所比較的裝置相似
TPS2596 現行 採用引腳封裝、具有可選過電壓保護鉗位的 2.7V 至 19V、85mΩ、0.13A 至 2A eFuse This product has up to 2-A loads and comes in a leaded package.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet TPS2595xx 2.7 V to 18 V, 4-A, 34-mΩ eFuse With Fast Overvoltage Protection datasheet (Rev. C) PDF | HTML 2018年 3月 19日
Application brief eFuses in Smart Electricity Meters PDF | HTML 2020年 9月 1日
Application brief Single Point Failure Protection for Motor Drives and PLC Systems 2020年 6月 30日
Certificate TPS2595 UL Certificate of Compliance IEC 62368-1 2020年 4月 21日
Certificate TPS2595 UL Certificate of Compliance UL 2367 2020年 4月 10日
Functional safety information eFuse: Safety Certification and why it Matters 2020年 3月 18日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Technical article Optimizing power density with eFuses PDF | HTML 2019年 6月 27日
Technical article Minimizing input power protection for smart speakers and smart displays PDF | HTML 2019年 6月 24日
Application note Basics of Power Switches (Rev. A) PDF | HTML 2019年 4月 26日
Application note Basics of eFuses (Rev. A) 2018年 4月 5日
Application note Achieve Bidirectional Control and Protection Through Back-to-Back Connected eFus 2017年 12月 22日
EVM User's guide TPS2595EVM eFuse Evaluation Board 2017年 11月 29日
Technical article How to use load switches and eFuses in your set-top box design PDF | HTML 2017年 11月 23日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS2595EVM — TPS2595 eFuse 評估模組

The TPS2595EVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS2595 eFuse device. The EVM allows the user to apply different input voltages (2.7V to 18V) under different loading conditions (0A to 4A) to the TPS2595. Output, input, load current monitor and (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TPS259520 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCC2A.ZIP (33 KB) - PSpice Model
下載
模擬型號

TPS259521 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB5A.ZIP (32 KB) - PSpice Model
下載
模擬型號

TPS259525 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB1A.ZIP (32 KB) - PSpice Model
下載
模擬型號

TPS259530 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB6A.ZIP (33 KB) - PSpice Model
下載
模擬型號

TPS259531 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB7A.ZIP (33 KB) - PSpice Model
下載
模擬型號

TPS259533 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB3A.ZIP (33 KB) - PSpice Model
下載
模擬型號

TPS259535 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMCB8B.ZIP (35 KB) - PSpice Model
下載
模擬型號

TPS259540 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMCC1B.ZIP (61 KB) - PSpice Model
下載
模擬型號

TPS259541 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB9A.ZIP (33 KB) - PSpice Model
下載
模擬型號

TPS259570 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB4A.ZIP (31 KB) - PSpice Model
下載
模擬型號

TPS259571 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCC0A.ZIP (72 KB) - PSpice Model
下載
模擬型號

TPS259573 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMCB2A.ZIP (31 KB) - PSpice Model
下載
計算工具

SLVC704 — TPS2595xx Design Calculation Tool

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
TPS2595 — 採用小型 WSON 封裝且具有過電壓保護的 2.7-V 至 18-V、34mΩ、0.5-4A eFuse
下載
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體

支援產品和硬體

此設計資源支援此類別中多數產品。

檢查產品詳細資料頁面以確認支援。
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

TIDA-050027 — 具有彈性分割功能，可最大限度地節省電源的多軌電視電源供應參考設計

The TIDA-050027 reference design is a power distribution solution for Television (TV) platforms. By providing a configuration that emulates common voltage rails and peripherals, this design can be used as a reference design across multiple TV power architectures including LCD and OLED TV. On the (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-050028 — 適用於固態驅動器模組、含 eFuse 的 VBus 保護參考設計

The TIDA-050028 reference design provides the front end protection of a SSD module and showcases the fully featured power tree for standard 3.3-V, 1.8-V, and 1.5-V rails. This size optimized design helps customers with appropriate selection of the integrated circuit protection device, load (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010043 — 適合 SpO2 和其它醫療應用的高效、高電流、線性 LED 驅動器參考設計

This reference design provides a protected, efficient (headroom-controlled), high-current (up to 1.5 A), linear (accurate and fast) light-emitting diode (LED) driver reference design to enable peripheral capillary oxygen saturation (SpO2) and other medical applications. A typical SpO2 application (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010011 — 用於保護繼電器處理器模組的高效電源供應架構參考設計

This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01638 — 適用於備用電源的無縫切換參考設計

The TIDA-01638 referencedesign showcases Power MUXing with redundant power. If one power source fails, the system needs to switchover to a backup power source and provide an uninterrupted source of power to downstream loads. Therefore, power redundancy ensures that if one power supply were to fail, (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01451 — 適用於機上盒的電源開關參考設計

The TIDA-01451 reference design’s functionality emulates the power distribution of Set Top Boxes. By using integrated load switches to control power rails, each rail can be turned on or off depending on the needs and wants of the user. Turning off rails that are not being used reduces power (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSG) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片