Inicio Gestión de la energía Conmutadores de potencia Controladores de diodo ideal/ORing

LM66100

ACTIVO

Diodo ideal de 1.5 V a 5.5 V, 1.5 A e IQ de 0.5 µA con FET integrado

alarmNotificaciones Haga su pedido ahora

Detalles del producto

Vin (min) (V) 1.5 Vin (max) (V) 5.5 Number of channels 1 Features Enable, Gate ON/OFF control, Power good signal, Reverse current blocking, Reverse polarity protection Iq (typ) (mA) 0.00015 Iq (max) (mA) 0.0003 FET Integrated single FET Operating temperature range (°C) -40 to 125 Design support EVM, Simulation Model Rating Catalog Imax (A) 1.5 Shutdown current (ISD) (mA) (A) 0.00012 Device type Ideal diode controller Product type Ideal diode controller
Vin (min) (V) 1.5 Vin (max) (V) 5.5 Number of channels 1 Features Enable, Gate ON/OFF control, Power good signal, Reverse current blocking, Reverse polarity protection Iq (typ) (mA) 0.00015 Iq (max) (mA) 0.0003 FET Integrated single FET Operating temperature range (°C) -40 to 125 Design support EVM, Simulation Model Rating Catalog Imax (A) 1.5 Shutdown current (ISD) (mA) (A) 0.00012 Device type Ideal diode controller Product type Ideal diode controller
SOT-SC70 (DCK) 6 4.2 mm² 2 x 2.1
  • Wide operating voltage range: 1.5 V – 5.5 V
  • Reverse voltage standoff on VIN:
    –6-V absolute maximum
  • Maximum continuous current (IMAX): 1.5 A
  • On-Resistance (RON):
    • 5-V VIN = 79-mΩ (typical)
    • 3.6-V VIN = 91-mΩ (typical)
    • 1.8-V VIN = 141-mΩ (typical)
  • Comparator chip enable (CE)
  • Channel status indication (ST)
  • Low current consumption:
    • 3.6-V VIN Shutdown current (ISD,VIN): 120-nA (typical)
    • 3.6-V VIN Quiescent current (IQ, VIN): 150-nA (typical)
  • Wide operating voltage range: 1.5 V – 5.5 V
  • Reverse voltage standoff on VIN:
    –6-V absolute maximum
  • Maximum continuous current (IMAX): 1.5 A
  • On-Resistance (RON):
    • 5-V VIN = 79-mΩ (typical)
    • 3.6-V VIN = 91-mΩ (typical)
    • 1.8-V VIN = 141-mΩ (typical)
  • Comparator chip enable (CE)
  • Channel status indication (ST)
  • Low current consumption:
    • 3.6-V VIN Shutdown current (ISD,VIN): 120-nA (typical)
    • 3.6-V VIN Quiescent current (IQ, VIN): 150-nA (typical)

The LM66100 is a Single-Input, Single-Output (SISO) integrated ideal diode that is well suited for a variety of applications. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.5 V to 5.5 V and can support a maximum continuous current of 1.5 A.

The chip enable works by comparing the CE pin voltage to the input voltage. When the CE pin voltage is higher than VIN, the device is disabled and the MOSFET is off. When the CE pin voltage is lower, the MOSFET is on. The LM66100 also comes with reverse polarity protection (RPP) that can protect the device from a miswired input, such as a reversed battery.

Two LM66100 devices can be used in an ORing configuration similar to a dual diode ORing implementation. In this configuration, the devices pass the highest input voltage to the output while blocking reverse current flow into the input supplies. These devices can compare input and output voltages to make sure that reverse current is blocked through an internal voltage comparator.

The LM66100 is available in a standard SC-70 package characterized for operation over a junction temperature range of –40°C to 125°C.

The LM66100 is a Single-Input, Single-Output (SISO) integrated ideal diode that is well suited for a variety of applications. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.5 V to 5.5 V and can support a maximum continuous current of 1.5 A.

The chip enable works by comparing the CE pin voltage to the input voltage. When the CE pin voltage is higher than VIN, the device is disabled and the MOSFET is off. When the CE pin voltage is lower, the MOSFET is on. The LM66100 also comes with reverse polarity protection (RPP) that can protect the device from a miswired input, such as a reversed battery.

Two LM66100 devices can be used in an ORing configuration similar to a dual diode ORing implementation. In this configuration, the devices pass the highest input voltage to the output while blocking reverse current flow into the input supplies. These devices can compare input and output voltages to make sure that reverse current is blocked through an internal voltage comparator.

The LM66100 is available in a standard SC-70 package characterized for operation over a junction temperature range of –40°C to 125°C.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 13
Tipo Título Fecha
* Data sheet LM66100 5.5-V, 1.5-A 79-mΩ, Low IQ Ideal Diode With Input Polarity Protection datasheet (Rev. A) PDF | HTML 14 jun 2019
Analog Design Journal Multibattery management in medical ultrasound systems (Rev. B) PDF | HTML 08 jun 2023
Application note IEEE 802.3cg 10BASE-T1L Power over Data Lines Powered Device Design (Rev. A) PDF | HTML 02 jun 2022
Application note Basics of Ideal Diodes (Rev. B) PDF | HTML 05 oct 2021
Application note Supercapacitor Backup Power Supply w/ Current Limit for Smart Electricity Meter (Rev. A) 03 ago 2021
Application note Designing a Low-Cost, High-Accuracy Infrared Thermometer 25 nov 2020
White paper How to detect and harden a meter against tampering by neutral disconnection 12 feb 2020
Application brief Extend Battery Life Using Load Switches and Ideal Diodes 16 ago 2019
E-book 11 Ways to Protect Your Power Path 03 jul 2019
Application brief Eliminate the Voltage Drop and Save Power: An Ideal Diode (Rev. A) 03 jul 2019
Application note Basics of Power Switches (Rev. A) PDF | HTML 26 abr 2019
Technical article What’s with chirping smoke detectors? PDF | HTML 06 mar 2019
EVM User's guide LM66100EVM User's Guide 18 dic 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM66100EVM — Módulo de evaluación LM66100 de diodo ideal de ±6 V, 1.5 A y baja IQ

The LM66100 evaluation module (EVM) is an assembled and tested circuit for evaluating the LM66100 ideal diode. The LM66100EVM allows the user to apply different input voltages (1.5 V to 5.5 V) under different loading conditions (0 A to 1.5 A), and evaluate configurations such as Dual ORing and (...)
Guía del usuario: PDF
Placa de evaluación

TPS63802HDKEVM — Kit de desarrollo de hardware TPS63802HDKEVM

The TPS63802HDKEVM is a universal development tool designed to help the users easily and quickly evaluate and test the most common buck-boost converter use-cases. The use-cases include backup power, input current limit, LED driver, digital voltage scaling, bypass mode and precise enable. The user (...)

Guía del usuario: PDF
Modelo de simulación

LM66100 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMD40B.ZIP (67 KB) - PSpice Model
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Diseños de referencia

TIDA-010224 — Diseño de referencia de cámara inalámbrica de baja potencia para una mayor duración de la batería

Este diseño de referencia proporciona una solución para una cámara inalámbrica que funciona con batería mediante la combinación de procesamiento de imágenes, conectividad, sensor y alimentación líderes en el sector. Los convertidores de potencia de alta eficiencia junto con la arquitectura (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

PMP30693 — Diseño de referencia de fuente de alimentación de reserva de supercondensador con límite de corrient

This reference design automatically provides a back-up voltage during a power interruption. It manages the charging of supercapitors and provides reverse blocking protection. The maximum supercapacitor charging current and voltage can be adjusted. When the input voltage fails a buck-boost (...)
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-SC70 (DCK) 6 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos