These LVDS data line receivers offers the widest common-mode input voltage range in the industry. These receivers provide an input voltage range specification compatible with a 5-V PECL signal as well as an overall increased ground-noise tolerance. They are in industry standard footprints with integrated termination as an option.
Precise control of the differential input voltage thresholds allows for inclusion of 50 mV of input voltage hysteresis to improve noise rejection on slowly changing input signals. The input thresholds are still no more than +50 mV over the full input common-mode voltage range.
The receivers can withstand ±15-kV Human-Body Model (HBM) and ±600-V Machine Model (MM) electrostatic discharges to the receiver input pins with respect to ground without damage. This provides reliability in cabled and other connections where potentially damaging noise is always a threat.
The receivers also include a (patent pending) failsafe circuit that provides a high-level output within 600 ns after loss of the input signal. The most common causes of signal loss are disconnected cables, shorted lines, or powered-down transmitters. The failsafe circuit prevents noise from being received as valid data under these fault conditions. This feature may also be used for wired-OR bus signaling. See The Active Failsafe Feature of the SN65LVDS32B application note.
The intended application and signaling technique of these devices is point-to-point baseband data transmission over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
The SN55LVDS33 is characterized for operation from –55°C to 125°C.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | High-Speed Differential Receiver datasheet (Rev. C) | 01 mar 2012 | |
| * | SMD | SN55LVDS33-SP SMD 5962-07248 | 08 jul 2016 | |
| * | Radiation & reliability report | SN55LVDS33-SP 50-krad and 100-krad TID Report | 31 mar 2015 | |
| * | Radiation & reliability report | SN55LVDS33-SP SEE Report | 31 mar 2015 | |
| Application brief | DLA Approved Optimizations for QML Products (Rev. B) | PDF | HTML | 17 may 2024 | |
| Selection guide | TI Space Products (Rev. J) | 12 feb 2024 | ||
| More literature | TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) | 31 ago 2023 | ||
| Application note | Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) | PDF | HTML | 17 nov 2022 | |
| Application note | Single-Event Effects Confidence Interval Calculations (Rev. A) | PDF | HTML | 19 oct 2022 | |
| Application brief | Space-Grade, 100-krad, Isolated Serial Peripheral Interface (SPI) LVDS Circuit | PDF | HTML | 29 jun 2021 | |
| E-book | Radiation Handbook for Electronics (Rev. A) | 21 may 2019 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| CFP (W) | 16 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.