Inicio Gestión de la energía Interruptores de potencia Interruptores del lado de la alimentación
Inicio
Gestión de la energía
Interruptores de potencia
Interruptores del lado de la alimentación

TPS1HC30-Q1

ACTIVO

Interruptor de lado alto inteligente de un canal, 30 mΩ, 5 A, automotriz

Haga su pedido ahora
Hoja de datos

TPS1HC30-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Operating voltage (max) (V) 28 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 30 Imax (A) 5 Current limit (min) (A) 1.2 Current limit (max) (A) 12 Current limit type Adjustable TI functional safety category Functional Safety-Capable Current limit accuracy +/-18% @ 3.6A Current sense accuracy +6/-6% @ 1.5A FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
Number of channels 1 Operating voltage (max) (V) 28 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 30 Imax (A) 5 Current limit (min) (A) 1.2 Current limit (max) (A) 12 Current limit type Adjustable TI functional safety category Functional Safety-Capable Current limit accuracy +/-18% @ 3.6A Current sense accuracy +6/-6% @ 1.5A FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
HTSSOP (PWP) 14 32 mm² 5 x 6.4
  • Single-channel, smart automotive, high side power switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3 V to 28 V
  • Low standby current, 2.5 µA at 85°C
  • Operating junction temperature, –40 to 150°C
  • 1.8-V, 3.3-V and 5-V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit and accuracy ±15% at 3.5 A
  • High-accuracy current sense, ±6% at 1 A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage Lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection
  • Diagnostic
    • On-state and Off-state output open-load and short-to-battery detection
    • Overload and short to ground detection
    • Thermal shutdown and swing detection
  • Qualifications
    • AEC-Q100 qualified for automotive applications:
      • Temperature grade 1: –40°C to +125°C, TA
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 14-pin, thermally-enhanced PWP package
  • Single-channel, smart automotive, high side power switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3 V to 28 V
  • Low standby current, 2.5 µA at 85°C
  • Operating junction temperature, –40 to 150°C
  • 1.8-V, 3.3-V and 5-V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit and accuracy ±15% at 3.5 A
  • High-accuracy current sense, ±6% at 1 A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage Lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection
  • Diagnostic
    • On-state and Off-state output open-load and short-to-battery detection
    • Overload and short to ground detection
    • Thermal shutdown and swing detection
  • Qualifications
    • AEC-Q100 qualified for automotive applications:
      • Temperature grade 1: –40°C to +125°C, TA
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 14-pin, thermally-enhanced PWP package

The TPS1HC30-Q1 device is a fully protected, high-side power switch with integrated NMOS power FET and charge pump, targeted for the intelligent control of the variable kinds of loads. Accurate current sense and programmable current limit features differentiate the device from the market.

Low-logic, high-threshold, VIH, of 1.5 V on the input pins allow use of MCUs down to 1.8 V. High-accuracy current sensing allows a better real-time monitoring effect and more accurate diagnostics without further calibration. The external high-accuracy current limit allows setting the current limit value by application. The device highly improves the reliability of the system by clamping the inrush current effectively under start-up or short-circuit conditions. The TPS1HC30-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including the low-wattage bulbs, LEDs, relays, solenoids, and heaters.

The TPS1HC30-Q1 device is a fully protected, high-side power switch with integrated NMOS power FET and charge pump, targeted for the intelligent control of the variable kinds of loads. Accurate current sense and programmable current limit features differentiate the device from the market.

Low-logic, high-threshold, VIH, of 1.5 V on the input pins allow use of MCUs down to 1.8 V. High-accuracy current sensing allows a better real-time monitoring effect and more accurate diagnostics without further calibration. The external high-accuracy current limit allows setting the current limit value by application. The device highly improves the reliability of the system by clamping the inrush current effectively under start-up or short-circuit conditions. The TPS1HC30-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including the low-wattage bulbs, LEDs, relays, solenoids, and heaters.
filter Buscar otro/a Interruptores del lado de la alimentación
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS1HC100-Q1 ACTIVO Interruptor de lado alto inteligente de un canal, 100 mΩ, 2.5 A, automotriz Same functionality and size with 100-mΩ high-side switch.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TPS1HC30-Q1, 30-mΩ, 5-A, Single-Channel Automotive Smart High Side Switch datasheet (Rev. A) PDF | HTML 21 dic 2022
Functional safety information TPS1HC30-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 21 jul 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS1HC30EVM — Módulo de evaluación TPS1HC30 para interruptor de lado alto inteligente de 28 V, 30 mΩ, 5 A, de cana

El TPS1HC30EVM es un módulo de evaluación (EVM) de hardware que se utiliza para permitir a los ingenieros de hardware evaluar el rendimiento y la funcionalidad completos del interruptor para automoción de lado alto TPS1HC30-Q1. El TPS1HC30EVM contiene todo lo necesario para probar y evaluar el (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (PWP) 14 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos