Inicio Gestión de la energía Conmutadores de potencia Interruptores de carga
Inicio
Gestión de la energía
Conmutadores de potencia
Interruptores de carga

TPS22953

ACTIVO

Interruptor de carga de 5.7 V, 5 A, 14 mΩ con tiempo de elevación ajustable, monitorización de tensi

Haga su pedido ahora
Hoja de datos

TPS22953

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Vin (min) (V) 0.7 Vin (max) (V) 5.7 Imax (A) 5 Ron (typ) (mΩ) 14 Shutdown current (ISD) (typ) (µA) 0.01 Quiescent current (Iq) (typ) (µA) 34 Soft start Adjustable Rise Time Current limit type None Features Power good signal, Reverse current protection, Thermal shutdown, Under voltage lock out Rating Catalog Operating temperature range (°C) -40 to 105 FET Internal Device type Load switches Function Inrush current control, Power good signal, Reverse current blocking, Thermal shutdown
Number of channels 1 Vin (min) (V) 0.7 Vin (max) (V) 5.7 Imax (A) 5 Ron (typ) (mΩ) 14 Shutdown current (ISD) (typ) (µA) 0.01 Quiescent current (Iq) (typ) (µA) 34 Soft start Adjustable Rise Time Current limit type None Features Power good signal, Reverse current protection, Thermal shutdown, Under voltage lock out Rating Catalog Operating temperature range (°C) -40 to 105 FET Internal Device type Load switches Function Inrush current control, Power good signal, Reverse current blocking, Thermal shutdown
WSON (DQC) 10 6 mm² 3 x 2 WSON (DSQ) 10 4 mm² 2 x 2
  • Integrated Single Channel Load Switch
  • Input Voltage Range: 0.7 V to 5.7 V
  • RON Resistance
    • RON = 14 mΩ at VIN = 5 V (VBIAS = 5 V)
  • 5-A Maximum Continuous Switch Current
  • Adjustable Undervoltage Lockout Threshold (UVLO)
  • Adjustable Voltage Supervisor with Power Good (PG) Indicator
  • Adjustable Output Slew Rate Control
  • Enhanced Quick Output Discharge Remains Active after Power is Removed (TPS22954 Only)
    • 15 Ω (Typ) Discharges 100 µF Within 10 ms
  • Reverse Current Blocking when Disabled (TPS22953 Only)
  • Automatic Restart after Supervisor Fault Detection When Enabled
  • Thermal Shutdown
  • Low Quiescent Current ≤ 50 µA
  • SON 10-pin Package with Thermal Pad
  • ESD Performance Tested Per JESD 22
    • 2-kV HBM and 750-V CDM
  • Integrated Single Channel Load Switch
  • Input Voltage Range: 0.7 V to 5.7 V
  • RON Resistance
    • RON = 14 mΩ at VIN = 5 V (VBIAS = 5 V)
  • 5-A Maximum Continuous Switch Current
  • Adjustable Undervoltage Lockout Threshold (UVLO)
  • Adjustable Voltage Supervisor with Power Good (PG) Indicator
  • Adjustable Output Slew Rate Control
  • Enhanced Quick Output Discharge Remains Active after Power is Removed (TPS22954 Only)
    • 15 Ω (Typ) Discharges 100 µF Within 10 ms
  • Reverse Current Blocking when Disabled (TPS22953 Only)
  • Automatic Restart after Supervisor Fault Detection When Enabled
  • Thermal Shutdown
  • Low Quiescent Current ≤ 50 µA
  • SON 10-pin Package with Thermal Pad
  • ESD Performance Tested Per JESD 22
    • 2-kV HBM and 750-V CDM

The TPS22953/54 are small, single channel load switches with controlled turn on. The devices contain a N-channel MOSFET that can operate over an input voltage range of 0.7 V to 5.7 V and can support a maximum continuous current of 5 A.

The integrated adjustable undervoltage lockout (UVLO) and adjustable power good (PG) threshold provides voltage monitoring as well as robust power sequencing. The adjustable rise time control of the device greatly reduces inrush current for a wide variety of bulk load capacitances, thereby reducing or eliminating power supply droop. The switch is independently controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. A 15-Ω on-chip load is integrated into the device for a quick discharge of the output when switch is disabled. The enhanced Quick Output Discharge (QOD) remains active for short time after power is removed from the device to finish discharging the output.

The TPS22953/54 are available in small, space-saving 10-SON packages with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

The TPS22953/54 are small, single channel load switches with controlled turn on. The devices contain a N-channel MOSFET that can operate over an input voltage range of 0.7 V to 5.7 V and can support a maximum continuous current of 5 A.

The integrated adjustable undervoltage lockout (UVLO) and adjustable power good (PG) threshold provides voltage monitoring as well as robust power sequencing. The adjustable rise time control of the device greatly reduces inrush current for a wide variety of bulk load capacitances, thereby reducing or eliminating power supply droop. The switch is independently controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. A 15-Ω on-chip load is integrated into the device for a quick discharge of the output when switch is disabled. The enhanced Quick Output Discharge (QOD) remains active for short time after power is removed from the device to finish discharging the output.

The TPS22953/54 are available in small, space-saving 10-SON packages with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

filter Buscar otro/a Interruptores de carga
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS22954 ACTIVO Interruptor de carga de 5.7 V, 5 A, 14 mΩ, con tiempo de elevación ajustable, monitorización de tens Pin-to-pin with no reverse current blocking and output discharge
Funcionalidad similar a la del dispositivo comparado
TPS22992 ACTIVO Interruptor de carga de 5.5 V, 6 A y 8.7 mΩ, con tiempo de elevación ajustable y descarga de salida Lower Ron with short circuit protection

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 14
Tipo Título Fecha
* Data sheet TPS2295x 5.7 V, 5 A, 14 mΩ On-Resistance Load Switch datasheet (Rev. D) PDF | HTML 16 sep 2016
E-book 11 Ways to Protect Your Power Path 03 jul 2019
Application brief Making the Switch to an Integrated Load Switch 11 jun 2019
Application note Integrated Load Switches Versus Discrete MOSFETs (Rev. A) 06 may 2019
Application note Load Switch Thermal Considerations (Rev. A) 11 oct 2018
Application note Basics of Load Switches (Rev. A) 05 sep 2018
Application note Power Multiplexing Using Load Switches and eFuses (Rev. A) 20 jun 2017
Application note Selecting a Load Switch to Replace a Discrete Solution 30 abr 2017
Application note Timing of Load Switches 27 abr 2017
Application note Reverse Current Protection in Load Switches 19 may 2016
Application note Quiescent Current vs Shutdown Current for Load Switch Power Consumption 30 mar 2016
Technical article When to use load switches in place of discrete MOSFETs PDF | HTML 03 feb 2016
Application note Managing Inrush Current (Rev. A) 28 may 2015
User guide TPS22953/54 User’s Guide 25 feb 2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS22953EVM — Módulo de evaluación de interruptor de carga con resistencia de encendido de 16 mΩ, de 5.7 V TPS2295

The TPS22953 device is a single channel low RON load switch with an operating voltage range of 0.7 V to 5.7 V. Both package versions DSQ (0.4mm pin pitch) and DQC (0.5mm pin pitch) of the TPS22953 are available on the TPS22953EVM for evaluation. The TPS22953 integrates a voltage supervisor which (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TPS22953 TINA-TI Reference Design (Rev. A)

SLVMAT4A.TSC (182 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TPS22953 TINA-TI Transient Spice Model (Rev. A)

SLVMAT5A.ZIP (28 KB) - TINA-TI Spice Model
Descargar
Modelo de simulación

TPS22953 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMAS6B.ZIP (54 KB) - PSpice Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (DQC) 10 Ultra Librarian
WSON (DSQ) 10 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos