GUI para el módulo de evaluación (EVM)
TSU6721
Interruptor de carga multimedia de puerto USB admite USB, UART, AUDIO, ID, MIC
Hoja de datos
TSU6721
- Switch Matrix
- USB and UART Switch support USB 2.0 HS
- Audio Switch with Negative Signal Capability
- ID Bypass Switch
- VBUS to MIC Switch
- DP to MIC Switch to Support MCPC
- Load Switch
- 100 mΩ Load Switch
- OTG Support
- 28 V VBUS Rating with Over-voltage Protection
- Programmable Overcurrent Limiter/Protection
- Charger Detection
- USB BCDv1.2 compliant
- VBUS Detection
- Data Contact Detection
- Primary and Secondary Detection
- Compatible Accessories
- USB Chargers (DCP, CDP)
- Apple Charger
- USB Data Port
- Audio Headset with MIC and Remote
- Docking Support
- Factory Cable
- Additional Features
- I2C Interface with Host Processor
- Switches Controlled by Automatic Detection or Manual Control
- Interrupts Generated for Plug/Unplug
- Decoupling FET Switch to VBUS Added to Reduce Degradation on MIC Line
- Support Control Signals used In Manufacturing (JIG, BOOT)
- ESD Performance Tested Per JESD 22
- 4000-V Human-Body Model (A114-B, Class II)
- 1500-V Charged-Device Model (C101)
- IEC ESD Performance
- ±8 kV Contact Discharge (IEC 61000-4-2) for VBUS/DP/DM/ID to GND
TSU6721 is a high performance USB port multimedia switch featuring automatic switching and accessory detection. The device connects a common USB port to pass audio, USB data, charging, On The Go (OTG) and factory mode signals. The audio path has negative signal capability includes left (mono/stereo), right (stereo) as well as microphone signals. Furthermore, TSU6721 is compatible with the MCPC specification.
TSU6721 features impedance detection which supports the detection of various accessories that are attached through DP, DM and ID pins of the USB connector. The switch is controlled by automatic switching or manually through I2C.
TSU6721 has an integrated low resistive Load Switch that is used to isolate the charger from the external connector. OverVoltage Protection and programmable OverCurrent Limiter/Protection are additional features included to the Load Switch.
The charger detection satisfies USB charger specification v1.2. In addition to DCP, CDP and SDP, the device also detects Apple Chargers.
Power for this device is supplied through VBAT of the system or through VBUS when attached. TSU6721 supports factory mode testing when a USB/UART JIG cable is used in development and manufacturing.
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4 | Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | MCPC Compatible USB Port Multimedia Switch datasheet | 11 jun 2013 | |
| Application note | High-Speed Interface Layout Guidelines (Rev. J) | PDF | HTML | 24 feb 2023 | |
| Application note | TSU6721 Accessory and Charger Detection Flow | 11 jun 2014 | ||
| EVM User's guide | TSU6721EVM Micro-USB Switch Evaluation Module | 29 may 2014 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
TSU6721EVM — TSU6721EVM: Módulo de evaluación de interruptor Micro-USB
The TSU6721EVM is designed to evaluate and demonstrate the functionality of TI’s TSU6721 micro-USB switch. The TSU6721EVM can be used as a standalone system or paired with the MSP-EXP430G2 LaunchPad to facilitate power and I2C communication. When paired with the LaunchPad, The TSU6721EVM GUI can be (...)
Guía del usuario: PDF
Herramienta de simulación
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Herramienta de simulación
TINA-TI — Programa de simulación analógica basado en SPICE
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| DSBGA (YFF) | 25 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.