MSP432E411Y

ACTIVO

MCU SimpleLink™ 32 bit Arm Cortex-M4F con ethernet, CAN, TFT LCD, 1MB Flash y 256 KB RAM

Detalles del producto

CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 140 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 140 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
NFBGA (ZAD) 212 100 mm² 10 x 10
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Media Independent Interface (MII) and Reduced MII (RMII)
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
    • One 1-Wire Module With a Bidirectional Serial Communication Protocol Provides Both Power and Data Over a Single Wire
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB of EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 212-Ball NFBGA (ZAD)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Media Independent Interface (MII) and Reduced MII (RMII)
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
    • One 1-Wire Module With a Bidirectional Serial Communication Protocol Provides Both Power and Data Over a Single Wire
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB of EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 212-Ball NFBGA (ZAD)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C

The SimpleLink MSP432E411Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E411Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E411Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E411Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E411Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

The SimpleLink MSP432E411Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E411Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E411Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E411Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E411Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

Descargar Ver vídeo con transcripción Video
Soporte de diseño limitado de TI disponible

Los proyectos existentes que utilizan este producto tienen un soporte de diseño limitado de TI. Si está disponible, encontrará material adicional, software y herramientas relevantes en la página del producto. Los diseños existentes que utilizan este producto tienen un soporte de diseño limitado de TI. Solicite asistencia limitada para diseño en los foros de asistencia TI E2E™.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet MSP432E411Y SimpleLink™ Ethernet Microcontroller datasheet PDF | HTML 26 oct 2017
* Errata MSP432E4 SimpleLink™ Microcontrollers Silicon Errata (Rev. A) PDF | HTML 27 jun 2025
* User guide MSP432E4 SimpleLink™ Microcontrollers Technical Reference Manual (Rev. A) PDF | HTML 25 oct 2018
Cybersecurity advisory Variable Time Tag Comparison on SimpleLink™ Devices PDF | HTML 05 jun 2020
White paper Understanding Security Features for SimpleLink™ MSP432E4 Ethernet MCUs (Rev. A) 31 ene 2019
Application note Using SimpleLink™ MSP432E4 microcontrollers over the JTAG interface (Rev. A) 11 ene 2019
Third party document uVision Lab for the TI MSP432E4 LaunchPad Board 28 dic 2017
Technical article Merging wired and wireless connectivity to build an intelligent gateway to the clo PDF | HTML 28 nov 2017
User guide MSP432E4 SimpleLink™ Microcontrollers Bootloader (BSL) User's Guide (Rev. A) 16 nov 2017
Application note System Design Guidelines for SimpleLink™ MSP432E4 Microcontrollers 31 oct 2017
Application note Using Feature Set of I2C Master on SimpleLink MSP432E4 Microcontrollers 27 oct 2017
White paper Building a gateway from the sensors to the cloud 26 oct 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LAUNCHXL-CC2640R2 — Kit de desarrollo CC2640R2 LaunchPad™ para MCU inalámbrica SimpleLink™ Bluetooth® de baja energía

Este LaunchPad™ acelera el desarrollo con una conexión Bluetooth® baja energía (BLE) mediante los dispositivos CC2640R2F o CC2640R2L. El SDK compatible ofrece una pila de protocolo Bluetooth 5 totalmente cualificada para aplicaciones BLE de modo único que admiten el modo de alta velocidad y capas (...)

Sonda de depuración

MSP432-DEBUGGERS — Depuradores para MSP432

MSP432 MCUs are designed to work with a variety of debuggers from Texas Instruments and third party vendors.

  • Texas Instruments:
    • XDS100v2:
      • The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for TI processors. The XDS100 family features the lowest (...)
Kit de desarrollo

CC3120BOOST — Procesador de red inalámbrica SimpleLink™ Wi-Fi® CC3120 de módulo complementario BoosterPack™

El procesador de red inalámbrica SimpleLink™ Wi-Fi® CC3120 proporciona a los usuarios la flexibilidad necesaria para agregar Wi-Fi a cualquier microcontrolador (MCU). El módulo enchufable CC3120 BoosterPack™ (CC3120BOOST) es una placa que puede conectarse fácilmente a los kits MCU Launchpad de TI (...)

Guía del usuario: PDF
Kit de desarrollo

MSP-EXP432E401Y — Kit de desarrollo LaunchPad™ MSP432E401Y para Ethernet SimpleLink™ MCU

El kit de desarrollo LaunchPad™ para microcontroladores Ethernet MSP432E401Y de SimpleLink™ es una plataforma de evaluación intuitiva para MCU Ethernet basadas en SimpleLink™ Arm® Cortex®-M4F. El kit de desarrollo Ethernet LaunchPad destaca la MCU MSP432E401Y con MAC y PHY Ethernet integrados y una (...)

Guía del usuario: PDF | HTML
Kit de desarrollo de software (SDK)

SIMPLELINK-MSP432-SDK SimpleLink MSP432P4 High-precision ADC MCU Software Development

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

SIMPLELINK-MSP432E4-SDK SimpleLink MSP432E4 Ethernet MCU Software Development Kit

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

SIMPLELINK-WIFI-CC3120-SDK-PLUGIN — SIMPLELINK-SDK-WIFI-PLUGIN

Nota importante:

Los SDK de SimpleLink se actualizan de manera regular. Para obtener las últimas actualizaciones de la versión, haga clic en Alertarme arriba.

El SDK de CC3120 contiene controladores, muchas aplicaciones de muestra para funciones Wi-Fi e Internet, además de documentación necesaria (...)

Guía del usuario: PDF
IDE, configuración, compilador o depurador

ARM-CGT — Herramientas de generación de código Arm®: compilador

Las herramientas de generación de código (compilador) TI Arm® son compatibles con el desarrollo de aplicaciones para plataformas basadas en TI Arm, en especial aquellas con los dispositivos de las series Cortex-M y Cortex-R de TI Arm.

Las herramientas actuales ARM-CGT-CLANG se derivan del (...)

Guía del usuario: PDF | HTML
IDE, configuración, compilador o depurador

CCSTUDIO Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

MSPKEIL — ARM® Keil® MDK

MDK Microcontroller Development Kit

ARM® Keil® MDK is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications. Keil MDK supports SimpleLink™ MSP432™ microcontrollers, and includes a fully integrated debugger for source and disassembly level (...)

IDE, configuración, compilador o depurador

SYSCONFIG Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

ULPADVISOR — Asesor de ULP (potencia ultrabaja)

ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)
Capacitación en línea

SIMPLELINK-ACADEMY-MSP432E4 SimpleLink™ Academy for MSP432E4

SimpleLink Academy for MSP432E4 delivers easy-to-use training modules that span a wide range of topics for all LaunchPads in the MSP432E family of microcontrollers
Productos y hardware compatibles

Productos y hardware compatibles

Enchufe

SIMPLELINK-SDK-BLUETOOTH-PLUGIN Bluetooth Plug-in for SimpleLink™ MCU SDK

The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Enchufe

SIMPLELINK-SDK-LVGL-PLUGIN SimpleLink™ SDK LittlevGL plug-in

The SimpleLink™ SDK LVGL Plugin is a companion software package that enables advanced graphics capabilities on various SimpleLink™ MCU platforms by integrating the free and open-source 3rd party library, LittlevGL, into the SimpleLink SDK ecosystem. The Plug-in provides example hardware abstraction (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Enchufe

SIMPLELINK-SDK-WIFI-PLUGIN SimpleLink™ software development kit (SDK) Wi-Fi® plug-in

The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Herramienta de programación de software

UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
Modelo de simulación

MSP432E411Y 212-NFBGA (ZAD) BSDL Model

SLAM322.ZIP (6 KB) - BSDL Model
Modelo de simulación

MSP432E411Y 212-NFBGA (ZAD) IBIS Model

SLAM323.ZIP (738 KB) - IBIS Model
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
NFBGA (ZAD) 212 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos