Inicio Microcontroladores (MCU) y procesadores Microcontroladores MCU de automatización y control de motores en tiempo real
Inicio
Microcontroladores (MCU) y procesadores
Microcontroladores
MCU de automatización y control de motores en tiempo real

TMS320F28P550SG

ACTIVO

MCU C2000™ de 32 bits con C28x + CLA de 150 MHz y 512 KB de memoria flash, 5 ADC, CLB, AES y NPU<

Haga su pedido ahora
Hoja de datos
Guías de usuario
Errata

TMS320F28P550SG

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

CPU 1 C28, 1 CLA Frequency (MHz) 150 Flash memory (kByte) 512 RAM (kByte) 101 ADC type 5 12-bit SAR Total processing (MIPS) 300 Features Automation, Configurable logic block, FPU32, InstaSPIN-FOC technology, NPU, Robotics UART 4 CAN (#) 2 PWM (Ch) 24 TI functional safety category Functional Safety-Compliant Number of ADC channels 26, 28, 35, 39 Direct memory access (Ch) 6 SPI 2 QEP 3 USB USB 2.0 Operating temperature range (°C) -40 to 150 Rating Catalog Communication interface CAN, FSI, I2C, LIN, PMBUS, SPI, UART Operating system FreeRTOS Hardware accelerators Control law accelerator, TinyEngine™ NPU, Trigonometric math accelerator Edge AI enabled Edge AI Studio enabled, Yes Nonvolatile memory (kByte) 512 Security Secure storage
CPU 1 C28, 1 CLA Frequency (MHz) 150 Flash memory (kByte) 512 RAM (kByte) 101 ADC type 5 12-bit SAR Total processing (MIPS) 300 Features Automation, Configurable logic block, FPU32, InstaSPIN-FOC technology, NPU, Robotics UART 4 CAN (#) 2 PWM (Ch) 24 TI functional safety category Functional Safety-Compliant Number of ADC channels 26, 28, 35, 39 Direct memory access (Ch) 6 SPI 2 QEP 3 USB USB 2.0 Operating temperature range (°C) -40 to 150 Rating Catalog Communication interface CAN, FSI, I2C, LIN, PMBUS, SPI, UART Operating system FreeRTOS Hardware accelerators Control law accelerator, TinyEngine™ NPU, Trigonometric math accelerator Edge AI enabled Edge AI Studio enabled, Yes Nonvolatile memory (kByte) 512 Security Secure storage
LQFP (PM) 64 144 mm² 12 x 12 LQFP (PZ) 100 256 mm² 16 x 16 TQFP (PDT) 128 256 mm² 16 x 16 TQFP (PNA) 80 144 mm² 12 x 12 VQFN (RSH) 56 49 mm² 7 x 7
  • Real-time processing:
    • 150MHz C28x 32-bit DSP CPU
    • Equivalent to 300MHz Arm® Cortex®-M7 based device on real-time signal chain performance (see the Real-time Benchmarks Showcasing C2000™ Control MCU’s Optimized Signal Chain Application Note
    • IEEE 754 single-precision Floating-Point Unit (FPU32)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • CRC Engine and Instructions (VCRC)
  • Programmable Control Law Accelerator (CLA)
  • On-chip memory
    • 1088KB of flash (ECC-protected) across five independent banks
      • Four 256KB banks
      • One 64KB bank, ideal of LFU/Bootloaders/data
    • 8KB of OTP (One Time Programmable flash memory)
    • 133KB of RAM (ECC/Parity protected)
  • Security
    • Secure Boot
    • JTAG Lock
    • Advanced Encryption Standard (AES) accelerator
    • Unique Identification (UID) number
  • Clock and system control
    • Two internal 10MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Internal VREG generation allows for single-supply design
    • Brownout reset (BOR) circuit
    • 5V fail-safe and tolerant capability on 4 GPIOs for PMBUS/I2C support
    • Configurable 1.35V VIH on 4 GPIOs
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 91 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (22 shared with Analog)
    • 17 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
      • Fast Plus Mode Support - 1MHz SCL
      • 5V/3.3V/1.35V VIH support on select pins
    • Two Inter-integrated Circuit (I2C) interfaces
    • Two Controller Area Network with Flexible Data-Rate (CAN FD/MCAN) bus port
      • 4KB message RAM per MCAN module, independent of system memory
      • Ability to re-use RAM for CPU data variables if MCAN is not used
    • One Universal Serial Bus (USB 2.0 MAC + PHY)
    • Two Serial Peripheral Interface (SPI) ports
    • Three UART-compatible Serial Communication Interface (SCI)
    • One UART-compatible Local Interconnect Network (LIN) interface
    • Fast Serial Interface (FSI) with one transmitter and one receiver (up to 200Mbps)
  • Analog system
    • Five 3.9MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 39 external channels (includes one gpdac output)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
      • Low DAC output to pin capability on CMPSS1
    • One 12-bit buffered DAC output
    • Three Programmable Gain Amplifiers (PGAs)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Programmable output filtering
  • Enhanced control peripherals
    • 24 ePWM channels with 12 channels that have high-resolution capability (150ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Two Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
    • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • 2 tiles
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Neural-network Processing Unit (NPU)
    • Highly Optimized for Deep Convolutional Neural Networks (CNN)
    • Variable weights and data lengths
      • 8-bit and 4-bit weights
      • 8-bit and 4-bit data
    • 600MOPS (Mega Operations Per Second) at 75MHz on 8bWx8bD
    • 1200MOPS at 75MHz on 4bWx8bD
    • Up to 10x NN inferencing performance improvement vs SW techniques
    • No direct coding required, TI AI tools generate FW libraries
    • Real-time control focused Edge AI Models
      • ARC fault example
      • Motor fault example
  • Live Firmware Update (LFU)
  • Diagnostic features
    • Memory Power-On Self-Test (MPOST)
  • Functional Safety-Compliant (1)
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 and IEC 61508 system design
    • Systematic capability up to ASIL D and SIL 3
    • Hardware integrity up to ASIL B and SIL 2
  • Safety-related certification
  • Package options:
    • 128-pin Thin Quad Flatpack (TQFP)[PDT suffix]
    • 100-pin Low-profile Quad Flatpack (LQFP)[PZ suffix]
    • 80-pin TQFP [PNA suffix]
    • 64-pin LQFP [PM suffix]
    • 56-pin Very Thin Quad Flatpack No-Lead (VQFN) [RSH suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 150°C

(1)Refer to the Functional Safety Manual for TMS320F28P55x Real-Time Microcontrollers and the TÜV certification for the exact part numbers that are Functional Safety-Compliant or Functional Safety Quality-Managed.
  • Real-time processing:
    • 150MHz C28x 32-bit DSP CPU
    • Equivalent to 300MHz Arm® Cortex®-M7 based device on real-time signal chain performance (see the Real-time Benchmarks Showcasing C2000™ Control MCU’s Optimized Signal Chain Application Note
    • IEEE 754 single-precision Floating-Point Unit (FPU32)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • CRC Engine and Instructions (VCRC)
  • Programmable Control Law Accelerator (CLA)
  • On-chip memory
    • 1088KB of flash (ECC-protected) across five independent banks
      • Four 256KB banks
      • One 64KB bank, ideal of LFU/Bootloaders/data
    • 8KB of OTP (One Time Programmable flash memory)
    • 133KB of RAM (ECC/Parity protected)
  • Security
    • Secure Boot
    • JTAG Lock
    • Advanced Encryption Standard (AES) accelerator
    • Unique Identification (UID) number
  • Clock and system control
    • Two internal 10MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Internal VREG generation allows for single-supply design
    • Brownout reset (BOR) circuit
    • 5V fail-safe and tolerant capability on 4 GPIOs for PMBUS/I2C support
    • Configurable 1.35V VIH on 4 GPIOs
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 91 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (22 shared with Analog)
    • 17 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
      • Fast Plus Mode Support - 1MHz SCL
      • 5V/3.3V/1.35V VIH support on select pins
    • Two Inter-integrated Circuit (I2C) interfaces
    • Two Controller Area Network with Flexible Data-Rate (CAN FD/MCAN) bus port
      • 4KB message RAM per MCAN module, independent of system memory
      • Ability to re-use RAM for CPU data variables if MCAN is not used
    • One Universal Serial Bus (USB 2.0 MAC + PHY)
    • Two Serial Peripheral Interface (SPI) ports
    • Three UART-compatible Serial Communication Interface (SCI)
    • One UART-compatible Local Interconnect Network (LIN) interface
    • Fast Serial Interface (FSI) with one transmitter and one receiver (up to 200Mbps)
  • Analog system
    • Five 3.9MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 39 external channels (includes one gpdac output)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
      • Low DAC output to pin capability on CMPSS1
    • One 12-bit buffered DAC output
    • Three Programmable Gain Amplifiers (PGAs)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Programmable output filtering
  • Enhanced control peripherals
    • 24 ePWM channels with 12 channels that have high-resolution capability (150ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Two Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
    • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • 2 tiles
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Neural-network Processing Unit (NPU)
    • Highly Optimized for Deep Convolutional Neural Networks (CNN)
    • Variable weights and data lengths
      • 8-bit and 4-bit weights
      • 8-bit and 4-bit data
    • 600MOPS (Mega Operations Per Second) at 75MHz on 8bWx8bD
    • 1200MOPS at 75MHz on 4bWx8bD
    • Up to 10x NN inferencing performance improvement vs SW techniques
    • No direct coding required, TI AI tools generate FW libraries
    • Real-time control focused Edge AI Models
      • ARC fault example
      • Motor fault example
  • Live Firmware Update (LFU)
  • Diagnostic features
    • Memory Power-On Self-Test (MPOST)
  • Functional Safety-Compliant (1)
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 and IEC 61508 system design
    • Systematic capability up to ASIL D and SIL 3
    • Hardware integrity up to ASIL B and SIL 2
  • Safety-related certification
  • Package options:
    • 128-pin Thin Quad Flatpack (TQFP)[PDT suffix]
    • 100-pin Low-profile Quad Flatpack (LQFP)[PZ suffix]
    • 80-pin TQFP [PNA suffix]
    • 64-pin LQFP [PM suffix]
    • 56-pin Very Thin Quad Flatpack No-Lead (VQFN) [RSH suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 150°C

(1)Refer to the Functional Safety Manual for TMS320F28P55x Real-Time Microcontrollers and the TÜV certification for the exact part numbers that are Functional Safety-Compliant or Functional Safety Quality-Managed.

The TMS320F28P55x (F28P55x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 150MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

The CLA allows significant offloading of common tasks from the main C28x CPU. The CLA is an independent 32-bit floating-point math accelerator that executes in parallel with the CPU. Additionally, the CLA has its own dedicated memory resources and it can directly access the key peripherals that are required in a typical control system. Support of a subset of ANSI C is standard, as are key features like hardware breakpoints and hardware task-switching.

The Neural-network Processing Unit (NPU) can support machine-learning inferencing using pre-trained models. Capable of 600–1200MOPS (Mega Operations Per Second) with model support for ARC fault detection or Motor Fault detection, the NPU provides up to 10x NN inferencing cycle improvement versus a SW-only-based implementation. Load and train models with the Edge AI Studio - Model Composer from TI or with the Tiny ML Modelmaker for an advanced set of capabilities. Source code for the C28x is generated by these tools, no manual coding is necessary. For customers who rely on their own AI training framework, TI’s Neural Network Compiler can help port your AI model to be compatible with many C28x-based MCUs. For those interested in reference solutions, request access to TI’s Arc Fault Detection Project or the Motor Bearing Fault Detection Project.

The F28P55x supports up to 1088KB of flash memory divided into four 256KB banks plus one 64KB bank, which enable programming one bank and execution in another bank in parallel. Up to 133KB of on-chip SRAM is also available to supplement the flash memory.

The Live Firmware Update hardware enhancements on F28P55x allow fast context switching from the old firmware to the new firmware to minimize application downtime when updating the device firmware.

High-performance analog blocks are integrated on the F28P55x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Twenty-four PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to power factor correction and advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, and CAN FD) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 Real-Time MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD28P55X evaluation board or the LAUNCHXL-F28P55X development kit, and download C2000Ware.

The TMS320F28P55x (F28P55x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 150MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

The CLA allows significant offloading of common tasks from the main C28x CPU. The CLA is an independent 32-bit floating-point math accelerator that executes in parallel with the CPU. Additionally, the CLA has its own dedicated memory resources and it can directly access the key peripherals that are required in a typical control system. Support of a subset of ANSI C is standard, as are key features like hardware breakpoints and hardware task-switching.

The Neural-network Processing Unit (NPU) can support machine-learning inferencing using pre-trained models. Capable of 600–1200MOPS (Mega Operations Per Second) with model support for ARC fault detection or Motor Fault detection, the NPU provides up to 10x NN inferencing cycle improvement versus a SW-only-based implementation. Load and train models with the Edge AI Studio - Model Composer from TI or with the Tiny ML Modelmaker for an advanced set of capabilities. Source code for the C28x is generated by these tools, no manual coding is necessary. For customers who rely on their own AI training framework, TI’s Neural Network Compiler can help port your AI model to be compatible with many C28x-based MCUs. For those interested in reference solutions, request access to TI’s Arc Fault Detection Project or the Motor Bearing Fault Detection Project.

The F28P55x supports up to 1088KB of flash memory divided into four 256KB banks plus one 64KB bank, which enable programming one bank and execution in another bank in parallel. Up to 133KB of on-chip SRAM is also available to supplement the flash memory.

The Live Firmware Update hardware enhancements on F28P55x allow fast context switching from the old firmware to the new firmware to minimize application downtime when updating the device firmware.

High-performance analog blocks are integrated on the F28P55x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Twenty-four PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to power factor correction and advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, and CAN FD) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 Real-Time MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD28P55X evaluation board or the LAUNCHXL-F28P55X development kit, and download C2000Ware.
filter Buscar otro/a MCU de automatización y control de motores en tiempo real
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 54
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet TMS320F28P55x Real-Time Microcontrollers datasheet (Rev. C) PDF | HTML 26 jun 2025
* Errata TMS320F28P55x Real-Time MCUs Silicon Errata (Rev. B) PDF | HTML 20 feb 2025
* User guide TMS320F28P55x Real-Time Microcontrollers Technical Reference Manual (Rev. D) 16 mar 2026
Application note Achieve Delayed Protection for Three Phase Three-Level Inverter with Minimum CLB Resources PDF | HTML 16 dic 2025
Application note Live Firmware Update Without Device Reset on C2000™ MCUs (Rev. C) PDF | HTML 29 oct 2025
Application note Serial Flash Programming of C2000 Microcontrollers (Rev. I) PDF | HTML 14 ago 2025
Application note MCU Control Center Tool Developer's Guide PDF | HTML 04 ago 2025
Application note MCU Signal Sight Tool Developer's Guide PDF | HTML 01 ago 2025
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. U) PDF | HTML 11 jul 2025
Application brief Enhancing EV Powertrain Efficiency: Optimizing Motor Control and Battery Performance With TMS320F28P55x MCUs PDF | HTML 14 may 2025
Application note C2000-IDE Assist Tool Migration Feature Guide PDF | HTML 23 abr 2025
Product overview Industrial Functional Safety for C2000™ Real-Time Microcontrollers (Rev. F) 23 abr 2025
User guide Getting Started with Bootloading on C2000™ Microcontrollers PDF | HTML 08 abr 2025
Functional safety information VDE Safety Certification Document for F280013x, F280015x, F28002x, F28004x, F2838x, F28003x, F28P65x, F28P55x 19 mar 2025
Application brief How to Debug Interrupt Abnormalities PDF | HTML 25 feb 2025
Design guide 11-kW, Bidirectional Three-Phase Three-Level (T-type) Inverter and PFC Reference Design (Rev. J) PDF | HTML 20 feb 2025
Certificate TMS320F28P55x TUV SUD Functional Safety Certificate 19 feb 2025
Application note C2000 IDE Assist Tool Features Guide (Rev. A) PDF | HTML 29 ene 2025
Functional safety information Functional Safety Manual for TMS320F28P55x Real-Time Microcontrollers PDF | HTML 12 dic 2024
User guide Migration Between TMS320F28P5xx and TMS320F280013x/TMS320F280015x (Rev. A) PDF | HTML 23 oct 2024
User guide Migration Between TMS320F28P5xx and TMS320F28003x (Rev. A) PDF | HTML 25 sep 2024
Application note Digital Control Implementation for Hybrid Hysteretic Control LLC Converter (Rev. A) PDF | HTML 21 ago 2024
Certificate Certificate of Compliance UL-CA-2340465-0 23 may 2024
Design guide Bidirectional, Dual Active Bridge Reference Design for Level 3 Electric Vehicle Charging Stations (Rev. E) PDF | HTML 30 abr 2024
User guide TMS320F28P55x Flash API Version 4.00.00.00 PDF | HTML 09 abr 2024
Application note C2000 Type-2 Programmable Gain Amplifier Use Cases PDF | HTML 04 abr 2024
Application note Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 19 abr 2023
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using PSPICE-FOR-TI) (Rev. A) PDF | HTML 24 mar 2023
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 24 mar 2023
Application note C2000 ePWM Developer’s Guide (Rev. A) PDF | HTML 24 feb 2023
Application note LIN Protocol and Physical Layer Requirements (Rev. A) PDF | HTML 24 ago 2022
Application note Intelligent LLC SR Control Using C2000 and UCD7138 (Rev. A) PDF | HTML 27 jun 2022
Application note Implement three-phase interleaved LLC on C2000 Type-4 PWM PDF | HTML 30 mar 2022
Design guide 11-kW, Bidirectional, Three-Phase ANPC Based on GaN Reference Design (Rev. A) PDF | HTML 18 mar 2022
Application note C2000 Memory Power-On Self-Test (M-POST) (Rev. A) PDF | HTML 03 mar 2022
Application brief Using An Op Amp for High-Side Current Sensing (Rev. A) PDF | HTML 07 dic 2021
Application note C2000 SysConfig PDF | HTML 20 oct 2021
Application note Getting Started with the MCAN (CAN FD) Module PDF | HTML 20 oct 2021
White paper Speed Up Development With C2000™ Real-Time MCUs Using SysConfig 20 oct 2021
Application note Leverage New Type ePWM Features for Multiple Phase Control PDF | HTML 11 may 2021
E-book An Engineer’s Guide to Designing with Precision Amplifiers 29 abr 2021
White paper Four key design considerations when adding energy storage to solar power grids 22 mar 2021
Application note CRM/ZVS PFC Implementation Based on C2000 Type-4 PWM Module PDF | HTML 18 feb 2021
Application note Power Topologies in Electric Vehicle Charging Stations PDF | HTML 16 sep 2020
Application note Secure BOOT On C2000 Device 21 jul 2020
Application note Configurable Error Generator for Controller Area Network PDF | HTML 19 dic 2019
Application note Fast Integer Division – A Differentiated Offering From C2000 Product Family PDF | HTML 14 jun 2019
Application note Embedded Real-Time Analysis and Response for Control Applications PDF | HTML 29 mar 2019
Circuit design Inverting op amp with non-inverting positive reference voltage circuit (Rev. A) 04 feb 2019
Circuit design Non-inverting op amp with inverting positive reference voltage circuit (Rev. A) 04 feb 2019
White paper Maximizing power for Level 3 EV charging stations 12 jun 2018
User guide Digitally Controlled Solar Micro Inverter Using C2000 MCU CCS User's Guide (Rev. B) 09 jun 2017
Application note AN-20 An Applications Guide for Op Amps (Rev. C) 01 may 2013
User guide Serial Peripheral Interface (SPI) for KeyStone Devices User’s Guide (Rev. A) 30 mar 2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LAUNCHXL-F28P55X — Kit de desarrollo de LaunchPad™ F28P55X de microcontroladores (MCU) en tiempo real C2000™

LAUNCHXL-F28P55X es una placa de desarrollo de bajo costo para los microcontroladores C2000™ en tiempo real de la serie de dispositivos F28P55x de TI. Ideal para la evaluación inicial y la creación de prototipos, proporciona una plataforma estandarizada y fácil de usar para desarrollar su próxima (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

TMDSCNCD28P55X — Módulo de evaluación controlCARD TMDSCNCD28P55X

TMDSCNCD28P55X es una placa de evaluación y desarrollo de bajo costo para la serie C2000™ MCU de dispositivos F28P55x de TI. Viene con un HSEC180 (conector de borde de alta velocidad de 180 pines) y es ideal como controlCARD para la evaluación inicial y el desarrollo de prototipos. Para la (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

XDS110ISO-EVM — Módulo de evaluación de complemento aislado XDS110 para los controlSOM de C2000 y Sitara™

La placa de complemento aislada XDS110 es un módulo de evaluación de depuración y programación flash en tiempo real para los controlSOM de C2000 y Sitara. Se puede conectar a los controlSOM de C2000 y Sitara a través de un conector no aislado de 120 pines o a través de un conector de 16 pines (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

ALGO-3P-UISP1-TI — Programador Algocraft μISP1 para dispositivos Texas Instruments

μISP puede funcionar conectado a un PC host (conexiones RS-232, USB y LAN integradas) o en modo independiente.

La ejecución del ciclo de programación en modo independiente puede ocurrir simplemente pulsando el botón de START o a través de algunas líneas de control TTL.

Su tamaño compacto y (...)

Desde: Algocraft
Visitar el sitio del socio
Tarjeta secundaria

TMDSHSECDOCK — Estación de acoplamiento de la placa de controlCARD HSEC180

TMDSHSECDOCK es una placa base que proporciona acceso mediante pines a las señales clave en controlCARD compatibles basados en HSEC180. Un área de las unidades de placa de base está disponible para la creación rápida de prototipos. La alimentación de la placa se puede realizar mediante el cable USB (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Sonda de depuración

TMDSEMU110-U — Sonda de depuración XDS110 JTAG

El XDS110 de Texas Instruments es una nueva clase de sonda de depuración (emulador) para procesadores integrados de TI. El XDS110 sustituye a la familia XDS100, al tiempo que es compatible con una mayor variedad de estándares (IEEE1149.1, IEEE1149.7, SWD) en un único pod. Todas las sondas de (...)

Guía del usuario: PDF
No disponible en TI.com
Sonda de depuración

TMDSEMU200-U — Sonda de depuración XDS200 USB

El XDS200 es una sonda de depuración (emulador) que se utiliza para depurar dispositivos integrados de TI. Para la mayoría de los dispositivos, se recomienda utilizar el XDS110 (www.ti.com/tool/TMDSEMU110-U), que es más nuevo y de menor costo. El XDS200 es compatible con una amplia variedad de (...)

No disponible en TI.com
Herramienta de programación de hardware

ALGO-3P-WRITENOW — Algocraft WriteNow! Programador

¡WriteNow! La serie de programadores en sistema supone un gran avance en el sector de la programación. Los programadores son compatibles con un gran número de dispositivos (microcontroladores, memorias, CPLD y otros dispositivos programables) de diversos fabricantes y tienen un tamaño compacto que (...)

Desde: Algocraft
Visitar el sitio del socio
Herramienta de programación de hardware

C-GANG — Solución de programación Gang rápida y confiable para medios flash independientes e integrados

El C-GANG es un programador gang de bajo costo que puede programar hasta seis objetivos idénticos a la vez. Es compatible con diversos microcontroladores de TI, incluidos los dispositivos MSPM0, MSP430 y C2000.

Desde: Elprotronic Inc.
No disponible en TI.com
Herramienta de programación de hardware

OPTEEQ-3P-SG400-SERIES — Programador Gang universal en el sistema OPTEEQ serie SG400

OPTEEQ Technologies es líder del mercado con más de una década de amplia experiencia en programación de chips semiconductores. El programador OPTEEQ SG400E ofrece opciones de 1 a 32 canales. Además de conservar la alta estabilidad y la velocidad de programación ultrarrápida de la serie SG400, (...)

Desde: OPTEEQ Technologies
View Options
Kit de desarrollo de software (SDK)

C2000WARE — C2000Ware for C2000 Microcontrollers

C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.

  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
Productos y hardware compatibles

Productos y hardware compatibles
Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

C2000WARE-DIGITALPOWER-SDK — DigitalPower SDK for C2000 Real-time Controllers

    • DigitalPower SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based digital power system development time targeted for various AC-DC, DC-DC and DC-AC power supply applications. The software includes (...)
Productos y hardware compatibles

Productos y hardware compatibles
Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

C2000WARE-MOTORCONTROL-SDK — MotorControl software development kit (SDK) for C2000™ MCUs

MotorControl SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 real-time controller based motor control system development time targeted for various three-phase motor control applications. The software (...)

Productos y hardware compatibles

Productos y hardware compatibles
Examinar Opciones de descarga
Primeros pasos

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles

Productos y hardware compatibles
Empiece
IDE, configuración, compilador o depurador

C2000_CLA_SAFETI_CQKIT_RV — C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • is free of charge for TI customers
  • does (...)
Productos y hardware compatibles

Productos y hardware compatibles
Opciones de descarga
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

EDGE-AI-STUDIO — Edge AI Studio

Edge AI Studio is part of the CCStudio™ development tool ecosystem.  Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors.  It supports both AI-accelerated (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Descargar
IDE, configuración, compilador o depurador

EDGE-AI-STUDIO-MCU — Edge AI Studio for Microcontrollers

Edge AI Studio is part of the CCStudio™ development tool ecosystem.  Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors.  It supports both AI-accelerated (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
Capacitación en línea

C28X-ACADEMY — C28X-ACADEMY

The C28x Academy is a great resource for developers to learn about C28x-based C2000 real-time microcontrollers. The Academy delivers informational training modules as well as hands-on lab exercises that span a variety of topics.
Productos y hardware compatibles

Productos y hardware compatibles
Examinar
Sistema operativo (SO)

WHIS-3P-SAFERTOS — RTOS de seguridad precertificado SAFERTOS de WITTENSTEIN

SAFERTOS® es un sistema operativo único en tiempo real diseñado para procesadores integrados. Está precertificado según las normas IEC 61508 SIL3 e ISO 26262 ASILD por TÜV SÜD. SAFERTOS® se diseñó específicamente para la seguridad por el equipo de expertos de WHIS y se usa globalmente en (...)
Desde: WITTENSTEIN High Integrity Systems
Visitar el sitio del socio
Herramienta de programación de software

C2000-C-GANG-SW — C-GANG Programmer Support Software - C2000 - From Elprotronics, Inc.

Support Software
Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Herramienta de programación de software

PLEXIM-3P-PLECS-CODER — Plexim PLECS Coder with TI C2000 Target Support Package

The PLECS Coder With TI C2000 Target Support Package streamlines the process of programming C2000 microcontrollers for power electronics and electrical drive applications. Designed to make embedded software development accessible and efficient, the PLECS Coder bridges the gap between control design (...)
Desde: Plexim GmbH
Visitar el sitio del socio
Herramienta de programación de software

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
Modelo de simulación

TMS320F28P55x BSDL Files

SPRM852.ZIP (14 KB) - BSDL Model
Descargar
Modelo de simulación

TMS320F28P55x IBIS Model (Rev. A)

SPRM853A.ZIP (971 KB) - IBIS Model
Descargar
Herramienta de diseño

CDNS-3P-MIDAS-SAFETY — MIDAS Safety Platform and Report Creator

The Midas Safety Platform provides early phase exploration of functional safety architectures and leverages native chip design data to perform accurate safety analysis efficiently. The platform is a unified solution available across Cadence products, and with its modular architecture, it supports (...)
Desde: Cadence Design Systems
View Options
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
LQFP (PM) 64 Ultra Librarian
LQFP (PZ) 100 Ultra Librarian
TQFP (PDT) 128 Ultra Librarian
TQFP (PNA) 80 Ultra Librarian
VQFN (RSH) 56 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos