Inicio Gestión de la energía Conmutadores de potencia Fusibles electrónicos y controladores de intercambio en caliente
Inicio
Gestión de la energía
Conmutadores de potencia
Fusibles electrónicos y controladores de intercambio en caliente

TPS2521

ACTIVO

eFuse de 4 A, 2.7 V a 5.7 V, 31 mΩ, con protección de polaridad inversa integrada

Haga su pedido ahora
Hoja de datos

TPS2521

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

FET Internal Ron (typ) (mΩ) 31 Vin (min) (V) 2.7 Vin (max) (V) 5.7 Vabsmax_cont (V) 28 Current limit (min) (A) 0.5 Current limit (max) (A) 4.44 Overcurrent response current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp Features Analog current monitor, Fault output, Input reverse polarity protection, Overvoltage clamping, Power good signal, Reverse current blocking always, Thermal shutdown UL recognition IEC62368, UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Reverse current blocking, Reverse polarity protection, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.000411 Quiescent current (Iq) (max) (A) 0.000593
FET Internal Ron (typ) (mΩ) 31 Vin (min) (V) 2.7 Vin (max) (V) 5.7 Vabsmax_cont (V) 28 Current limit (min) (A) 0.5 Current limit (max) (A) 4.44 Overcurrent response current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp Features Analog current monitor, Fault output, Input reverse polarity protection, Overvoltage clamping, Power good signal, Reverse current blocking always, Thermal shutdown UL recognition IEC62368, UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Reverse current blocking, Reverse polarity protection, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.000411 Quiescent current (Iq) (max) (A) 0.000593
VQFN-HR (RPW) 10 4 mm² 2 x 2
  • Wide operating input voltage range: 2.7 V to 5.7 V
  • 28-V absolute maximum
  • Withstands negative voltages up to –15 V
  • Integrated back-to-back FETs with low on-resistance: RON = 31 mΩ (typ.)
  • Ideal diode operation with true reverse current blocking
  • Fast overvoltage clamp (OVC) with pin-selectable threshold (3.8 V, 5.7 V) with 5-µs (typ.) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Active current limit response
    • Adjustable threshold (ILIM) 0.5 A–4.44 A
      • ±10% accuracy for ILIM > 1 A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
    • Output load current monitor accuracy: ±6% (IOUT ≥ 1 A)
  • Fast-trip response for short-circuit protection
    • 500-ns (typ.) response time
    • Adjustable (2 × ILIM) and fixed thresholds
  • Active High Enable input with adjustable undervoltage lockout threshold (UVLO)
  • Adjustable output slew rate control (dVdt)
  • Overtemperature protection
  • Power Good indication (PG) with adjustable threshold (PGTH)
  • UL 2367 recognition
    • File No. E169910
    • RILM ≥ 750 Ω
  • IEC 62368-1 CB certified
  • Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
  • Wide operating input voltage range: 2.7 V to 5.7 V
  • 28-V absolute maximum
  • Withstands negative voltages up to –15 V
  • Integrated back-to-back FETs with low on-resistance: RON = 31 mΩ (typ.)
  • Ideal diode operation with true reverse current blocking
  • Fast overvoltage clamp (OVC) with pin-selectable threshold (3.8 V, 5.7 V) with 5-µs (typ.) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Active current limit response
    • Adjustable threshold (ILIM) 0.5 A–4.44 A
      • ±10% accuracy for ILIM > 1 A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
    • Output load current monitor accuracy: ±6% (IOUT ≥ 1 A)
  • Fast-trip response for short-circuit protection
    • 500-ns (typ.) response time
    • Adjustable (2 × ILIM) and fixed thresholds
  • Active High Enable input with adjustable undervoltage lockout threshold (UVLO)
  • Adjustable output slew rate control (dVdt)
  • Overtemperature protection
  • Power Good indication (PG) with adjustable threshold (PGTH)
  • UL 2367 recognition
    • File No. E169910
    • RILM ≥ 750 Ω
  • IEC 62368-1 CB certified
  • Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch

The TPS2521x family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the device well suited for systems which need load side energy hold up storage in case input power supply fails.

Output current limit level can be set with a single external resistor. It is also possible to get an accurate sense of the output load current by measuring the voltage drop across the current limit resistor.

Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Loads are protected from input overvoltage conditions by clamping the output to a safe fixed maximum voltage (pin selectable).

The devices are available in a 2-mm × 2-mm, 10-pin HotRod QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

The TPS2521x family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the device well suited for systems which need load side energy hold up storage in case input power supply fails.

Output current limit level can be set with a single external resistor. It is also possible to get an accurate sense of the output load current by measuring the voltage drop across the current limit resistor.

Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Loads are protected from input overvoltage conditions by clamping the output to a safe fixed maximum voltage (pin selectable).

The devices are available in a 2-mm × 2-mm, 10-pin HotRod QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

filter Buscar otro/a Fusibles electrónicos y controladores de intercambio en caliente
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS25947 ACTIVO eFuse de 5.5 A, 2.7 V a 23 V, 28 mΩ, con protección de polaridad inversa integrada Footprint compatible at wider voltage and current range.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TPS2521xx, 2.7-V–5.7-V, 4-A, 31-mΩ True Reverse Current Blocking eFuse with Input Reverse Polarity Protection datasheet (Rev. A) PDF | HTML 29 mar 2022
Certificate TPS25210x CB Test Certificate IEC 62368-1 19 ene 2022
Certificate TPS25210x UL2367 Certificate of Compliance E169910 19 ene 2022
EVM User's guide TPS25210EVM: Evaluation Module for TPS25210 eFuse PDF | HTML 31 mar 2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS25210EVM — Módulo de evaluación TPS25210 para eFuse

La placa de evaluación del fusible electrónico TPS25210EVM permite la evaluación del circuito de referencia del fusible electrónico TPS25210 de Texas Instruments. El dispositivo TPS25210 es un fusible electrónico de 2.7 V a 5.7 V, 4 A con FET integrado de 31 mΩ con protección de corriente inversa, (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPS25210x PSpice Transient Model

SLVMDK0.ZIP (117 KB) - PSpice Model
Descargar
Herramienta de cálculo

SLVRBH7 — TPS25210 Design Calculator

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Fusibles electrónicos y controladores de intercambio en caliente
TPS2521 — eFuse de 4 A, 2.7 V a 5.7 V, 31 mΩ, con protección de polaridad inversa integrada
Descargar
Herramienta de cálculo

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Productos y hardware compatibles

Productos y hardware compatibles

Este recurso de diseño es compatible con la mayoría de los productos de estas categorías.

Revise la página de detalles del producto para verificar la compatibilidad.
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN-HR (RPW) 10 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos