Inicio Gestión de la energía Interruptores de potencia Fusibles electrónicos y controladores de intercambio en caliente
Inicio
Gestión de la energía
Interruptores de potencia
Fusibles electrónicos y controladores de intercambio en caliente

TPS25910

ACTIVO

eFuse de 0.8-6.5 A, 2.9 V a 20 V y 30 mΩ

Haga su pedido ahora
Hoja de datos

TPS25910

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

FET Internal Ron (typ) (mΩ) 30 Vin (min) (V) 2.9 Vin (max) (V) 20 Vabsmax_cont (V) 22 Current limit (min) (A) 0.8 Current limit (max) (A) 6.5 Overcurrent response current limiting Fault response Auto-retry Soft start Adjustable Features Fault output, Reverse current blocking when off UL recognition UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
FET Internal Ron (typ) (mΩ) 30 Vin (min) (V) 2.9 Vin (max) (V) 20 Vabsmax_cont (V) 22 Current limit (min) (A) 0.8 Current limit (max) (A) 6.5 Overcurrent response current limiting Fault response Auto-retry Soft start Adjustable Features Fault output, Reverse current blocking when off UL recognition UL2367 Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN (RSA) 16 16 mm² 4 x 4
  • Up to 20-V Bus Operation
  • Integrated 30-mΩ Pass MOSFET
  • Programmable Current Limit from:
    0.83 A to 6.5 A
  • Programmable Inrush Current Slew Rate
  • Thermal Shutdown and fault alert
  • 4-mm x 4-mm QFN16
  • –40°C to 125°C Junction
    Temperature Range
  • UL2367 Recognized - File Number E169910
  • CB Certified
  • Up to 20-V Bus Operation
  • Integrated 30-mΩ Pass MOSFET
  • Programmable Current Limit from:
    0.83 A to 6.5 A
  • Programmable Inrush Current Slew Rate
  • Thermal Shutdown and fault alert
  • 4-mm x 4-mm QFN16
  • –40°C to 125°C Junction
    Temperature Range
  • UL2367 Recognized - File Number E169910
  • CB Certified

The TPS25910 device provides highly integrated hot-swap power management and superior protection in applications up to 20 V. The maximum UV turn-on threshold of 2.9 V makes the TPS25910 device well suited to standard bus voltages as low as 3.3 V. This device is intended for systems where a voltage bus must be protected from undesired permanent and transient overload.

At start-up or when hot plugging into the system bus, the TPS25910 device limits the inrush current by controlling the ramp rate of the output voltage, VOUT. The slew rate of VOUT can be adjusted with a capacitor between the GATE pin and the GND pin.

Built in SOA protection ensures that the internal MOSFET operates inside a safe operating area (SOA) under the harshest operating conditions. In addition, the current-limit threshold, which is independent of the power limit, can be adjusted with a resistor between the ILIM pin and the GND pin.

The TPS25910 device provides a fault indicator output when in thermal fault.

The TPS25910 device is available in a 16-pin QFN package.

The TPS25910 device provides highly integrated hot-swap power management and superior protection in applications up to 20 V. The maximum UV turn-on threshold of 2.9 V makes the TPS25910 device well suited to standard bus voltages as low as 3.3 V. This device is intended for systems where a voltage bus must be protected from undesired permanent and transient overload.

At start-up or when hot plugging into the system bus, the TPS25910 device limits the inrush current by controlling the ramp rate of the output voltage, VOUT. The slew rate of VOUT can be adjusted with a capacitor between the GATE pin and the GND pin.

Built in SOA protection ensures that the internal MOSFET operates inside a safe operating area (SOA) under the harshest operating conditions. In addition, the current-limit threshold, which is independent of the power limit, can be adjusted with a resistor between the ILIM pin and the GND pin.

The TPS25910 device provides a fault indicator output when in thermal fault.

The TPS25910 device is available in a 16-pin QFN package.
filter Buscar otro/a Fusibles electrónicos y controladores de intercambio en caliente
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS2597 ACTIVO eFuse de 9.8 mΩ, 2.7 V–23 V, 7 A, con monitor de corriente preciso y supresión de sobrecorriente tra eFuse with higher current, lower RON, and smaller package for better power density.
TPS25981 ACTIVO eFuse de 2.7 V a 16 V, 10 A, 6 mΩ con temporizador de supresión de sobrecorriente transitoria eFuse with higher current, lower RON and smaller package option.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 10
Tipo Título Fecha
* Data sheet 2.9-V to 20-V High-Current Load Switch with Programmable Inrush Slew Rate datasheet (Rev. D) 29 ene 2014
Analog Design Journal How to implement an isolated USB 2.0 high speed, Type-C® DRP PDF | HTML 31 mar 2022
Functional safety information eFuse: Safety Certification and why it Matters 18 mar 2020
Certificate TPS25910 UL Certificate of Compliance IEC 62368-1 17 ene 2020
E-book 11 Ways to Protect Your Power Path 03 jul 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Application note Hybrid Battery Charger with Load Control for Telecom Equipments (Rev. A) 09 may 2018
Application note Basics of eFuses (Rev. A) 05 abr 2018
Application note Power Multiplexing Using Load Switches and eFuses (Rev. A) 20 jun 2017
User guide TPS25910EVM-088 EVM: Evaluation Module for TPS25910 (Rev. A) 31 dic 2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

3220DFP-DGLEVM — Controlador de puerto orientado hacia abajo tipo C HD3SS3220 con módulo de evaluación SuperSpeed 2:1

The HD3SS3220 DFP Dongle EVM is designed to evaluate HD3SS3220 devices for DFP implementations.  This EVM can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C connector.
Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TPS25910EVM-088 — Módulo de evaluación de interruptor de carga de alta corriente TPS25910

The Texas Instruments TPS25910EVM-088 evaluation module (EVM) helps designers evaluate the performance of the TPS25910 high power load switch with programmable slew rate. The EVM contains input and output connectors, as well as control jumpers to ease evaluation of device features.

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TUSB320-HA-EVM — Lógica de canal de configuración USB tipo C y módulo de evaluación de control de puerto TUSB320HAI

The TUSB320-HA-EVM is designed to evaluate TUSB320HA devices.  The EVM can be configured to operate in DFP, UFP or DRP mode via DIP switch selection and/or I2C control.  All of the control inputs are also selectable via DIP Switch configuration.  The TUSB320HA devices can be used (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TUSB320-LA-EVM — Lógica de canal de configuración USB tipo C y módulo de evaluación de control de puerto TUSB320LAI

The TUSB320-LA-EVM is designed to evaluate TUSB320LA devices.  The EVM can be configured to operate in DFP, UFP or DRP mode via DIP switch selection and/or I2C control.  All of the control inputs are also selectable via DIP Switch configuration.  The TUSB320LA devices can be used (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TUSB320EVM — Módulo de evaluación (EVM) TUSB320

The TUSB320EVM can be configured to operate in DFP, UFP, or DRP mode via DIP switch selection and/or I2C control. All of the control inputs are also selectable via DIP switch configuration. The TUSB320 devices can be used with legacy USB systems or Type-C systems for evaluation purposes.

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TUSB542EVM — Módulo de evaluación de multiplexor 2:1 USB tipo C de recontrolador de 5 Gbps TUSB542

The TUSB542EVM is a dual channel USB 3.0 SuperSpeed re-driver supporting systems with Type-C connectors. The device complies with USB 3.1 spec revision 1.0 (Gen I), supporting electrical idle condition and low frequency periodic signals (LFPS) for USB power management modes.
Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

USB-CTM-MINIDK-EVM — Módulo de evaluación de placa Mini Dock USB tipo C™ con soporte de carga y video

The USB Type-C™ and Power Delivery (PD) MiniDock evaluation module (EVM) provides a complete reference solution for a USB Type-C dock including audio, USB data, power and video.  The EVM has a small 2-inch by 4-inch form factor and supports both source and sink power capabilities over (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPS25910 TINA-TI Reference Design

SLUM473.TSC (85 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TPS25910 TINA-TI Transient Spice Model

SLUM472.ZIP (18 KB) - TINA-TI Spice Model
Descargar
Modelo de simulación

TPS25910 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM332A.ZIP (35 KB) - PSpice Model
Descargar
Herramienta de cálculo

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Productos y hardware compatibles

Productos y hardware compatibles

Este recurso de diseño es compatible con la mayoría de los productos de estas categorías.

Revise la página de detalles del producto para verificar la compatibilidad.
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Diseños de referencia

TIDA-01243 — Diseño de referencia de Minidock de USB tipo C™ y de suministro de energía con video y soporte de ca

The USB Type-C® and power delivery (PD) minidock reference design provides a reference for a USB Type-C dock including audio, USB data, power and video.  This reference design has a small 2-inch by 4-inch form factor and supports both source and sink power capabilities over the (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00891 — Diseño de referencia de conector macho USB tipo C a conector hembra USB tipo A SuperSpeed MUX con co

The TIDA-00891 is designed to evaluate HD3SS3220 devices for UFP implementations. This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.  Reference design files can be provided upon request to aid PCB (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00890 — Diseño de referencia de conector macho USB tipo A a conector hembra USB tipo C SuperSpeed MUX con co

The TIDA-00890 Dongle is designed to evaluate HD3SS3220 devices for DFP implementations.  This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.  The layout files can be used as a guideline to (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

TIDA-00728 — Diseño de referencia del extensor de USB tipo C de puerto frontal

The Front Port Type-C extender reference design connects to an internal motherboard USB3.0 connectors and provides signal conditioning to both High-Speed and SuperSpeed signals to the remotely placed front port Type-C connector.  This module enables two fully functional USB Type-C connectors (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

TIDA-00624 — Diseño de referencia de USB tipo A a USB tipo C SS (SuperSpeed) MUX con controlador DFP

This addapter converts a USB standard host type-A port to Type-C DFP (downstream-facing port) with support for default, 1.5 A and 3.0A VBUS current levels. The TUSB2522 simplifies the design by integrating 2:1 USB 3.1 (up to 10 Gbps) mux with a DFP controller to monitor the Type-C configuration (...)
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RSA) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos