Inicio Gestión de la energía Conmutadores de potencia Fusibles electrónicos y controladores de intercambio en caliente
Inicio
Gestión de la energía
Conmutadores de potencia
Fusibles electrónicos y controladores de intercambio en caliente

TPS2660

ACTIVO

eFuse de 0.1-2.23 A, 4.2 V a 60 V, 150 mΩ, con protección de polaridad inversa de entrada integra

Haga su pedido ahora
Hoja de datos

TPS2660

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

FET Internal Ron (typ) (mΩ) 150 Vin (min) (V) 4.2 Vin (max) (V) 60 Vabsmax_cont (V) 62 Current limit (min) (A) 0.1 Current limit (max) (A) 2.23 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp, Cut-off Features Current monitoring, Fault output, Reverse current blocking always, Reverse polarity protection UL recognition IEC62368, UL2367 TI functional safety category Functional Safety-Capable Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Reverse current blocking, Reverse polarity protection, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
FET Internal Ron (typ) (mΩ) 150 Vin (min) (V) 4.2 Vin (max) (V) 60 Vabsmax_cont (V) 62 Current limit (min) (A) 0.1 Current limit (max) (A) 2.23 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Clamp, Cut-off Features Current monitoring, Fault output, Reverse current blocking always, Reverse polarity protection UL recognition IEC62368, UL2367 TI functional safety category Functional Safety-Capable Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Reverse current blocking, Reverse polarity protection, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
HTSSOP (PWP) 16 32 mm² 5 x 6.4 VQFN (RHF) 24 20 mm² 5 x 4
  • 4.2-V to 60-V Operating voltage, 62-V absolute maximum
  • Integrated reverse input polarity protection down to –60 V
    • Zero additional components required
  • Integrated back to back MOSFETs with 150-mΩ total RON
  • 0.1-A to 2.23-A Adjustable current limit
    (±5% accuracy at 1 A)
  • Functional safety capable
    • Documentation available to aid functional safety system design
  • Load protection during Surge (IEC 61000-4-5) with minimum external components
  • IMON current indicator output (±8.5% accuracy)
  • Low quiescent current, 300-µA in operating, 20-µA in shutdown
  • Adjustable UVLO, OVP cut off, output slew rate control
  • Reverse current blocking
  • Fixed 38-V overvoltage clamp (TPS26602 only)
  • Available in easy-to-use 16-Pin HTSSOP and 24-Pin VQFN packages
  • Selectable current-limiting fault response options (Auto-Retry, Latch Off, Circuit Breaker Modes)
  • UL 2367 Recognized
    • File No. 169910
    • RILIM ≥ 5.36 kΩ (2.35-A maximum)
  • UL60950 - Safe during single point failure test
    • Open/Short ILIM detection
  • 4.2-V to 60-V Operating voltage, 62-V absolute maximum
  • Integrated reverse input polarity protection down to –60 V
    • Zero additional components required
  • Integrated back to back MOSFETs with 150-mΩ total RON
  • 0.1-A to 2.23-A Adjustable current limit
    (±5% accuracy at 1 A)
  • Functional safety capable
    • Documentation available to aid functional safety system design
  • Load protection during Surge (IEC 61000-4-5) with minimum external components
  • IMON current indicator output (±8.5% accuracy)
  • Low quiescent current, 300-µA in operating, 20-µA in shutdown
  • Adjustable UVLO, OVP cut off, output slew rate control
  • Reverse current blocking
  • Fixed 38-V overvoltage clamp (TPS26602 only)
  • Available in easy-to-use 16-Pin HTSSOP and 24-Pin VQFN packages
  • Selectable current-limiting fault response options (Auto-Retry, Latch Off, Circuit Breaker Modes)
  • UL 2367 Recognized
    • File No. 169910
    • RILIM ≥ 5.36 kΩ (2.35-A maximum)
  • UL60950 - Safe during single point failure test
    • Open/Short ILIM detection

The TPS2660x devices are compact, feature rich high voltage eFuses with a full suite of protection features. The wide supply input range of 4.2 to 60 V allows control of many popular DC bus voltages. The device can withstand and protect the loads from positive and negative supply voltages up to ±60 V. Integrated back to back FETs provide reverse current blocking feature making the device suitable for systems with output voltage holdup requirements during power fail and brownout conditions. Load, source and device protection are provided with many adjustable features including overcurrent, output slew rate and overvoltage, undervoltage thresholds. The internal robust protection control blocks along with the high voltage rating of the TPS2660x helps to simplify the system designs for Surge protection.

A shutdown pin provides external control for enabling and disabling the internal FETs as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and precise current monitor output. The MODE pin allows flexibility to configure the device between the three current-limiting fault responses (circuit breaker, latch off, and Auto-retry modes).

The devices are available in a 5-mm × 4.4-mm 16-pin HTSSOP as well as 5-mm x 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range.

The TPS2660x devices are compact, feature rich high voltage eFuses with a full suite of protection features. The wide supply input range of 4.2 to 60 V allows control of many popular DC bus voltages. The device can withstand and protect the loads from positive and negative supply voltages up to ±60 V. Integrated back to back FETs provide reverse current blocking feature making the device suitable for systems with output voltage holdup requirements during power fail and brownout conditions. Load, source and device protection are provided with many adjustable features including overcurrent, output slew rate and overvoltage, undervoltage thresholds. The internal robust protection control blocks along with the high voltage rating of the TPS2660x helps to simplify the system designs for Surge protection.

A shutdown pin provides external control for enabling and disabling the internal FETs as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and precise current monitor output. The MODE pin allows flexibility to configure the device between the three current-limiting fault responses (circuit breaker, latch off, and Auto-retry modes).

The devices are available in a 5-mm × 4.4-mm 16-pin HTSSOP as well as 5-mm x 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range.
filter Buscar otro/a Fusibles electrónicos y controladores de intercambio en caliente
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS2640 ACTIVO eFuse industrial de 2 A, 42 V, con protección de polaridad de entrada inversa integrada Optimized eFuse for <40-V applications
Funcionalidad similar a la del dispositivo comparado
TPS1641 ACTIVO eFuse de 2.7 V a 40 V, 152 mΩ, 1.8 A con limitación de potencia de salida 2.7 to 36-V eFuse without reverse current blocking and output power limiting.
TPS2662 ACTIVO eFuse de 0.025-0.88 A, 4.5 V a 60 V, 478 mΩ, con protección de polaridad inversa de entrada y salida This product is a 60-V eFuse with 25-mA to 880mA of current, as well as input and output protection
TPS2663 ACTIVO eFuse de 0.6-6 A, 4.5 V a 60 V, 31 mΩ, con limitación de potencia de salida y protección contra sobr This product is a 60-V eFuse with 0.6-A to 6-A of current, as well as output power limiting and power good indication

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 22
Tipo Título Fecha
* Data sheet TPS2660x 60-V, 2-A Industrial eFuse With Integrated Reverse Input Polarity Protection datasheet (Rev. G) PDF | HTML 19 dic 2019
Application note Reliable Startup with Large and Unknown Capacitive Loads (Rev. A) PDF | HTML 07 feb 2022
Application brief Adding Real-Time Communication to Linux (Rev. A) 07 may 2021
Application note Simplifying EFT, Surge and Power-Fail Protection Circuits in PLC Systems (Rev. D) PDF | HTML 05 may 2021
Application note PowerPath Management Solution for BTS Antenna Sharing Hub Using TPS2660 eFuse 03 mar 2021
Technical article eFuses in factory automation: all-in-one system power protection PDF | HTML 15 sep 2020
Application brief Single Point Failure Protection for Motor Drives and PLC Systems 30 jun 2020
Functional safety information Streamlining Functional Safety Certification in Automotive and Industrial 09 jun 2020
Application note Fault Handling Using TPS2660 eFuse (Rev. A) PDF | HTML 18 may 2020
Certificate TPS2660 UL Certificate of Compliance IEC 60950-1 10 abr 2020
Certificate TPS2660 UL Certificate of Compliance UL 2367 10 abr 2020
Functional safety information eFuse: Safety Certification and why it Matters 18 mar 2020
Functional safety information TPS266x Functional Safety FIT Rate and Failure Mode Distribution 16 dic 2019
E-book 11 Ways to Protect Your Power Path 03 jul 2019
Application note Backplane Power Protection in PLC Systems 11 jun 2019
Application note Basics of Power Switches (Rev. A) PDF | HTML 26 abr 2019
Application brief Advanced High-Side Switch With Dynamic Current Limit for IO-Link Master 07 ene 2019
Technical article Experience seamless shopping thanks to electronic shelf labels PDF | HTML 10 oct 2018
Application note Basics of eFuses (Rev. A) 05 abr 2018
Application note Power Multiplexing Using Load Switches and eFuses (Rev. A) 20 jun 2017
EVM User's guide TPS26600-02EVM: Evaluation Module for TPS2660x User's Guide (Rev. A) 20 feb 2017
Technical article How an eFuse can help provide robust industrial power path protection PDF | HTML 31 oct 2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS26600-02EVM — Módulo de evaluación de eFuse industrial de 2.23 A, 60 V, integrado TPS2660

The TPS26600-02EVM allows reference circuit evaluation of TI TPS2660x devices. The TPS2660x are compact 4.2-V to 55-V, 2.23-A industrial eFuses with integrated back-to-back FETs, programmable undervoltage, overvoltage, reverse-polarity, overcurrent, inrush current protection, and output current (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TPS26600 PSpice Transient Model (Rev. B)

SLVMBR3B.ZIP (286 KB) - PSpice Model
Descargar
Modelo de simulación

TPS26600 TINA-TI Reference Design

SLVMBX7.TSC (425 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TPS26600 TINA-TI Transient Spice Model

SLVMBX6.ZIP (71 KB) - TINA-TI Spice Model
Descargar
Modelo de simulación

TPS26601 PSpice Transient Model

SLVMBY3.ZIP (277 KB) - PSpice Model
Descargar
Modelo de simulación

TPS26601 TINA-TI Reference Design

SLVMBY2.TSC (259 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TPS26601 TINA-TI Transient Spice Model

SLVMBY4.ZIP (71 KB) - TINA-TI Spice Model
Descargar
Modelo de simulación

TPS26602 PSpice Transient Model (Rev. C)

SLVMBR4C.ZIP (287 KB) - PSpice Model
Descargar
Modelo de simulación

TPS26602 TINA-TI Reference Design

SLVMBX9.TSC (356 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TPS26602 TINA-TI Transient Spice Model

SLVMBX8.ZIP (68 KB) - TINA-TI Spice Model
Descargar
Herramienta de cálculo

SLVC668 — TPS26600 Design Calculator

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Fusibles electrónicos y controladores de intercambio en caliente
TPS2660 — eFuse de 0.1-2.23 A, 4.2 V a 60 V, 150 mΩ, con protección de polaridad inversa de entrada integra
Descargar
Herramienta de cálculo

SLVC669 — TPS26602 Design Calculator

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Fusibles electrónicos y controladores de intercambio en caliente
TPS2660 — eFuse de 0.1-2.23 A, 4.2 V a 60 V, 150 mΩ, con protección de polaridad inversa de entrada integra
Descargar
Herramienta de cálculo

SLVC681 — TPS26601 Design Calculator

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Fusibles electrónicos y controladores de intercambio en caliente
TPS2660 — eFuse de 0.1-2.23 A, 4.2 V a 60 V, 150 mΩ, con protección de polaridad inversa de entrada integra
Descargar
Herramienta de cálculo

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Productos y hardware compatibles

Productos y hardware compatibles

Este recurso de diseño es compatible con la mayoría de los productos de estas categorías.

Revise la página de detalles del producto para verificar la compatibilidad.
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Diseños de referencia

TIDA-03031 — Diseño de referencia de protección de entrada y alimentación de reserva para la unidad de controlado

The TIDA-03031 reference design provides a solution for input power path protection and backup supply design in a typical PLC controller unit. It replaces traditionally used discrete-circuit implementations with fully integrated protection circuits.
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-01081 — Diseño de referencia del control de iluminación LED para la visión artificial

This LED lighting control reference design demonstrates a unique approach to drive and control a string of multiple high-power light-emitting diodes (LEDs). This reference design is targeted for industrial machine vision systems and is also suitable for other industrial or automotive lighting (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010261 — Diseño de referencia de sensor Ethernet 10BASE-T1L de par único con alimentación a través de líneas

En este diseño de referencia se muestra una implementación de un terminal de comunicaciones Ethernet de par único (SPE) que incluye alimentación a través de líneas de datos (PoDL). El diseño utiliza un Sitara™ AM2434 MCU interfaz de un extremo frontal analógico en lado único y una capa (...)
Design guide: PDF
Diseños de referencia

TIDA-010052 — Diseño de referencia de la fuente de alimentación de seguridad para los controles del motor

This reference design implements a safe-power supply for powering up microcontrollers in an architecture featuring two MCUs. The design has several protection features including overvoltage protection and short circuit protection to prevent the MCUs from getting damaged. The DC/DCs, LMR36515 and (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010008 — Diseño de referencia basado en TVS de abrazadera plana para protección contra transitorios para apli

This reference design features multiple approaches for  protecting AC or DC analog input, DC analog output, AC or DC binary input, digital output with a high side or low side driver, LCD bias supply, USB interfaces (power and data) and onboard power supplies with 24, 12 or 5V input used in (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-01621 — Diseño de referencia del controlador de freno de retención inteligente con regulación de corriente p

This reference design implements safe brake control functionality in servo drives as per IEC EN 61800-5-2 by providing two channel output signals to control an external holding brake. The holding brake will be latched when the power supply is cut off and released when voltage is applied to the (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (PWP) 16 Ultra Librarian
VQFN (RHF) 24 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos