Inicio Gestión de la energía Interruptores de potencia Fusibles electrónicos y controladores de intercambio en caliente
Inicio
Gestión de la energía
Interruptores de potencia
Fusibles electrónicos y controladores de intercambio en caliente
NUEVO

TPS1685

PRESENTACIÓN PRELIMINAR

Intercambio en caliente (fusible electrónico) integrado apilable de 9 V a 80 V, 3.65 mΩ y 20 A con m

Haga su pedido ahora
Hoja de datos

TPS1685

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

FET Internal Ron (typ) (mΩ) 3.6 Vin (min) (V) 9 Vin (max) (V) 80 Vabsmax_cont (V) 92 Current limit (min) (A) 2 Current limit (max) (A) 20 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Current monitoring, Fault output, Over Current Protection, Overvoltage protection, Power good signal, Short-circuit protection, Soft-start, Thermal shutdown Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0022
FET Internal Ron (typ) (mΩ) 3.6 Vin (min) (V) 9 Vin (max) (V) 80 Vabsmax_cont (V) 92 Current limit (min) (A) 2 Current limit (max) (A) 20 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Current monitoring, Fault output, Over Current Protection, Overvoltage protection, Power good signal, Short-circuit protection, Soft-start, Thermal shutdown Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0022
LQFN-CLIP (VMA) 27 30 mm² 5 x 6
  • Input operating voltage range: 9V to 80V
    • 92V absolute maximum
    • Withstands negative voltages up to –5V at output
  • Integrated FET with low on-resistance: RON = 3.65mΩ (typ)
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Adjustable overvoltage protection
  • Supports parallel connection of multiple eFuses with device state synchronization and load sharing during start-up and steady state
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Precise load current monitoring
    • <3% error for over 50-100% of max current
    • 1MHz bandwidth
  • Robust overcurrent protection
    • Circuit-breaker response
    • Adjustable threshold: 2A to 20A
    • Overcurrent protection accuracy: ±3%
    • Adjustable transient overcurrent timer (ITIMER) to support peak currents
  • Fast-trip response to short-circuit events
  • Overtemperature protection (OTP) with analog die temperature monitor output (TEMP)
  • FET health monitoring and reporting
  • Fault indication pin (FLT )
  • Power Good indication pin (PGOOD)
  • Small footprint: QFN 6mm × 5mm
    • IPC9592B clearance for 60V
  • Input operating voltage range: 9V to 80V
    • 92V absolute maximum
    • Withstands negative voltages up to –5V at output
  • Integrated FET with low on-resistance: RON = 3.65mΩ (typ)
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Adjustable overvoltage protection
  • Supports parallel connection of multiple eFuses with device state synchronization and load sharing during start-up and steady state
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Precise load current monitoring
    • <3% error for over 50-100% of max current
    • 1MHz bandwidth
  • Robust overcurrent protection
    • Circuit-breaker response
    • Adjustable threshold: 2A to 20A
    • Overcurrent protection accuracy: ±3%
    • Adjustable transient overcurrent timer (ITIMER) to support peak currents
  • Fast-trip response to short-circuit events
  • Overtemperature protection (OTP) with analog die temperature monitor output (TEMP)
  • FET health monitoring and reporting
  • Fault indication pin (FLT )
  • Power Good indication pin (PGOOD)
  • Small footprint: QFN 6mm × 5mm
    • IPC9592B clearance for 60V

The TPS1685x is an integrated high current circuit protection and power management device. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short-circuits and excessive inrush current. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse. An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management such as Intel PSYS and PROCHOT to optimize server and data-center performance.

Multiple TPS1685x devices can be connected in parallel to increase the total current capacity for high power systems. All devices actively synchronize their operating state and share current during start-up as well as steady state to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management techniques such as Intel PSYS and PROCHOT# to maximize system throughput and power supply utilization.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

The TPS1685x is an integrated high current circuit protection and power management device. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short-circuits and excessive inrush current. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse. An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management such as Intel PSYS and PROCHOT to optimize server and data-center performance.

Multiple TPS1685x devices can be connected in parallel to increase the total current capacity for high power systems. All devices actively synchronize their operating state and share current during start-up as well as steady state to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management techniques such as Intel PSYS and PROCHOT# to maximize system throughput and power supply utilization.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
filter Buscar otro/a Fusibles electrónicos y controladores de intercambio en caliente
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TPS1685x 9V–80V, 3.65mΩ, 20A Stackable Integrated Hotswap (eFuse) With Accurate and Fast Current Monitor datasheet PDF | HTML 24 sep 2024
EVM User's guide TPS1685EVM Evaluation Module for TPS1685 eFuse User's Guide PDF | HTML 03 sep 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS1685EVM — Módulo de evaluación TPS1685

El TPS1685EVM se utiliza para evaluar el rendimiento del dispositivo con fusibles electrónicos TPS1685. El TPS1685EVM viene con dos fusibles electrónicos TPS16850 conectados en paralelo para evaluar un diseño de 54 V (típico) y 40 A (estado estable). Este módulo de evaluación incorpora dos (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Herramienta de cálculo

TPS1685-CALC — TPS1685 Design Calculator

The design calculator allows customer to size the external peripheral components while designing with TPS1685 eFuse.
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Fusibles electrónicos y controladores de intercambio en caliente
TPS1685 — Intercambio en caliente (fusible electrónico) integrado apilable de 9 V a 80 V, 3.65 mΩ y 20 A con m
Descargar
Herramienta de cálculo

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Productos y hardware compatibles

Productos y hardware compatibles

Este recurso de diseño es compatible con la mayoría de los productos de estas categorías.

Revise la página de detalles del producto para verificar la compatibilidad.
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
LQFN-CLIP (VMA) 27 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos