Inicio Interfaz Circuitos integrados USB Circuitos integrados USB Type-C y USB Power Delivery
Inicio
Interfaz
Circuitos integrados USB
Circuitos integrados USB Type-C y USB Power Delivery
NUEVO

TPS26750

ACTIVO

Controlador USB de tipo C® y USB Power Delivery (PD) 3.1 con soporte de rango de alimentación extend

Haga su pedido ahora
Hoja de datos

TPS26750

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Function Type-C Type PD controller Power role DRP, Sink, Source Alternate mode No External power-path control GPIO Data role DFP, DRD, DRP Internal power path 5 V 3 A Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 125
Function Type-C Type PD controller Power role DRP, Sink, Source Alternate mode No External power-path control GPIO Data role DFP, DRD, DRP Internal power path 5 V 3 A Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 125
VQFN (RSM) 32 16 mm² 4 x 4
  • This device is certified by the USB-IF for PD3.1
    • PD3.1 silicon is required for certification of new USB PD designs
    • TPS26750 TID#: 11450
    • Article on PD2.0 vs. PD3.0
  • Optimized for USB Type-C PD power applications
    • Integrated I2C control for TI battery chargers
      • Ex: In Development
    • Web-based GUI and pre-configured firmware
    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c and E2E guide
  • Extended Power Range (EPR)
    • Supports EPR source and sink
    • EPR 28V, 36V, 48V, and AVS
  • Programmable Power Supply(PPS)
    • Supports PPS source and sink
    • Standalone PPS source control TI battery chargers
    • Programmable interface for PPS sink
  • Liquid Detection
    • Measures directly at the Type-C connector
    • Integrated error handling and protection
  • Integrated fully managed power path & protection
    • Integrated 5V, 3A, and 36mΩ sourcing switch
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V and 3A source power path
    • 26V tolerant CC pins for robust protection when connected to non-compliant devices
  • USB Type-C Power Delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • 3.3V LDO output for dead battery support
    • Power supply from 3.3V or VBUS source
    • 1 I2C primary port
    • 1 I2C secondary port
  • This device is certified by the USB-IF for PD3.1
    • PD3.1 silicon is required for certification of new USB PD designs
    • TPS26750 TID#: 11450
    • Article on PD2.0 vs. PD3.0
  • Optimized for USB Type-C PD power applications
    • Integrated I2C control for TI battery chargers
      • Ex: In Development
    • Web-based GUI and pre-configured firmware
    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c and E2E guide
  • Extended Power Range (EPR)
    • Supports EPR source and sink
    • EPR 28V, 36V, 48V, and AVS
  • Programmable Power Supply(PPS)
    • Supports PPS source and sink
    • Standalone PPS source control TI battery chargers
    • Programmable interface for PPS sink
  • Liquid Detection
    • Measures directly at the Type-C connector
    • Integrated error handling and protection
  • Integrated fully managed power path & protection
    • Integrated 5V, 3A, and 36mΩ sourcing switch
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V and 3A source power path
    • 26V tolerant CC pins for robust protection when connected to non-compliant devices
  • USB Type-C Power Delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • 3.3V LDO output for dead battery support
    • Power supply from 3.3V or VBUS source
    • 1 I2C primary port
    • 1 I2C secondary port

The TPS26750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS26750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS26750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI asks the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.

The TPS26750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS26750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS26750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI asks the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.
filter Buscar otro/a Circuitos integrados USB Type-C y USB Power Delivery
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Tipo Título Fecha
* Data sheet TPS26750 USB Type-C® and USB PD Controller With Integrated Power Switches Optimized for Power Applications datasheet PDF | HTML 30 sep 2024
Application note TPS25751 and TPS26750 EEPROM Update Over I2C PDF | HTML 22 oct 2024
Technical article USB Type-C® and USB Power Delivery: Designing for both Extended Power Range and battery-powered systems (Rev. A) PDF | HTML 14 oct 2024
EVM User's guide TPS26750 Evaluation Module User's Guide PDF | HTML 27 sep 2024
Technical article Designing an application to support a wide input voltage and battery voltage PDF | HTML 05 ene 2024
User guide TPS26750 Technical Reference Manual PDF | HTML 26 sep 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS26750EVM — TPS26750 evaluation module

The TPS26750 single port USB Type-C™ and Power Delivery evaluation module (EVM) is specifically intended for evaluating USB Power Delivery extended power range. It allows the user to develop various power profiles and debug existing USB Type-C and Power Delivery systems.

Guía del usuario: PDF | HTML
No disponible en TI.com
GUI para el módulo de evaluación (EVM)

USBCPD-APPLICATION-CUSTOMIZATION-TOOL — Application customization tool for TI USB-C® PD controllers

The USBCPD-APPLICATION-CUSTOMIZATION-TOOL enables application-specific device configuration and programming of certain USB Power Delivery controllers. The GUI is compatible with the corresponding hardware evaluation modules (EVMs) as well as custom hardware designs using the generated application (...)

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados USB Type-C y USB Power Delivery
TPS25750 — Controlador USB Type-C® y USB Power Delivery altamente integrado con GUI preconfigurada TPS25751 — Controlador USB-C® Power Delivery 3.1 con detección de humedad y alimentación programable TPS26750 — Controlador USB de tipo C® y USB Power Delivery (PD) 3.1 con soporte de rango de alimentación extend
Desarrollo de hardware
Placa de evaluación
TPS25750EVM — Módulo de evaluación de controlador USB Type-C® y Power Delivery USB altamente integrado TPS25750 TPS25751EVM — Módulo de evaluación TPS25751 TPS26750EVM — TPS26750 evaluation module
Iniciar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
View Options
Diseños de referencia

PMP41115 — Diseño de referencia de cargador USB Type-C y USB PD3.1 integrado de 240 W

Este diseño de referencia es un cargador USB Type-C y USB Power Delivery (PD) integrado para baterías de 10 a 12 celdas para aplicaciones como bicicletas eléctricas, bancos de energía de alta capacidad y aplicaciones de centrales eléctricas portátiles. El diseño incorpora controladores USB PD3.1 (...)
Test report: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RSM) 32 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos