首頁 電源管理 電源開關 高壓側開關控制器
首頁
電源管理
電源開關
高壓側開關控制器

TPS4811-Q1

現行

Automotive, 3.5V to 100V high-side driver with protection and diagnostics

立即訂購
產品規格表

TPS4811-Q1

現行
產品規格表 立即訂購

產品詳細資料

Operating voltage (max) (V) 80 Operating voltage (min) (V) 3.5 Reverse polarity protection (V) -30 IGate sink (typ) (A) 4 IGate source (typ) (A) 4 VGS (max) (V) 13 Current sense accuracy +/-2% @ 30mV +/-6% @ 5mV Short-circuit protection response time (µs) 1.2 Features Automotive load dump compatibility, Current monitoring, Current sense/monitor, High-side RSNS, Overcurrent protection with adjustable delay, Precharge FET driver, Short circuit protection Operating temperature range (°C) -40 to 125 Rating Automotive
Operating voltage (max) (V) 80 Operating voltage (min) (V) 3.5 Reverse polarity protection (V) -30 IGate sink (typ) (A) 4 IGate source (typ) (A) 4 VGS (max) (V) 13 Current sense accuracy +/-2% @ 30mV +/-6% @ 5mV Short-circuit protection response time (µs) 1.2 Features Automotive load dump compatibility, Current monitoring, Current sense/monitor, High-side RSNS, Overcurrent protection with adjustable delay, Precharge FET driver, Short circuit protection Operating temperature range (°C) -40 to 125 Rating Automotive
VSSOP (DGX) 19 15.3 mm² 5.1 x 3
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 80V input range (100V absolute maximum)
  • Output reverse polarity protection down to –30V
  • Integrated 12V charge pump with 100µA capacity
  • Low 1.6µA shutdown current (EN/UVLO = Low)
  • Strong pull up (3.7A) and pull down (4A) gate driver
  • Drives external back-to-back N-channel MOSFETs
  • Variant with integrated pre-charge switch driver (TPS48111-Q1) to drive capacitive loads
  • Two-level adjustable overcurrent protection (IWRN, ISCP) with adjustable circuit breaker timer (TMR) and fault flag output (FLT_I)
  • Fast short-circuit protection: 1.2µs (TPS48111-Q1), 4µs (TPS48110-Q1)

  • Accurate analog current monitor output (IMON): ±2% at 30mV VSNS

  • Accurate, adjustable undervoltage lockout (UVLO) and overvoltage protection (OV): < ±2%
  • Remote overtemperature sensing (DIODE) and protection with fault flag output (FLT_T)
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 80V input range (100V absolute maximum)
  • Output reverse polarity protection down to –30V
  • Integrated 12V charge pump with 100µA capacity
  • Low 1.6µA shutdown current (EN/UVLO = Low)
  • Strong pull up (3.7A) and pull down (4A) gate driver
  • Drives external back-to-back N-channel MOSFETs
  • Variant with integrated pre-charge switch driver (TPS48111-Q1) to drive capacitive loads
  • Two-level adjustable overcurrent protection (IWRN, ISCP) with adjustable circuit breaker timer (TMR) and fault flag output (FLT_I)
  • Fast short-circuit protection: 1.2µs (TPS48111-Q1), 4µs (TPS48110-Q1)

  • Accurate analog current monitor output (IMON): ±2% at 30mV VSNS

  • Accurate, adjustable undervoltage lockout (UVLO) and overvoltage protection (OV): < ±2%
  • Remote overtemperature sensing (DIODE) and protection with fault flag output (FLT_T)

The TPS4811x-Q1 family is a 100V smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–80V, the device is suitable for 12V, 24V, and 48V system designs.

It has a strong 3.7A peak source (PU) and 4A peak sink (PD) GATE driver that enables power switching using parallel FETs in high current system designs. Use INP as the gate driver control input.

The device has accurate current sensing (±2%) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output.

The TPS48111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode, the controller draws a total shutdown current of 1.6µA at 48V supply input.

The TPS4811x-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance.

The TPS4811x-Q1 family is a 100V smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–80V, the device is suitable for 12V, 24V, and 48V system designs.

It has a strong 3.7A peak source (PU) and 4A peak sink (PD) GATE driver that enables power switching using parallel FETs in high current system designs. Use INP as the gate driver control input.

The device has accurate current sensing (±2%) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output.

The TPS48111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode, the controller draws a total shutdown current of 1.6µA at 48V supply input.

The TPS4811x-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance.
filter 尋找其它 高壓側開關控制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS1211-Q1 現行 Automotive, 3.5V to 45V high-side driver with protection and diagnostics High-side driver with 3.5-V to 40-V (45-V absolute max) voltage operating range

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS4811-Q1 100V Automotive Smart High-Side Driver With Protection and Diagnostics datasheet (Rev. D) PDF | HTML 2024年 4月 2日
Application note Achieving Reverse Battery Protection Using TI High Side Switch Controllers (Rev. A) PDF | HTML 2024年 11月 21日
Application brief Realizing Remote Temperature Sensing and Protection Using TI High-Side Switch Controllers PDF | HTML 2024年 10月 17日
User guide TPS48110Q1EVM: Evaluation Module for Smart High-Side Driver TPS48110-Q1 (Rev. A) PDF | HTML 2022年 10月 21日
User guide TPS48111Q1EVM: Evaluation Module for Smart High-Side Driver TPS48111-Q1 (Rev. A) PDF | HTML 2022年 10月 21日
Functional safety information TPS4811x-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2022年 5月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS48110Q1EVM — 適用於智慧型高壓側驅動器的 TPS48110-Q1 評估模組

TPS48110Q1EVM 允許 TI 的 TPS48101-Q1 控制器的參考電路評估。TPS48110-Q1 是具有兩個層級的可調整過電流防護的 3.5-V 至 80-V 智慧型高壓側控制器，配備可調整斷路器計時器、過電壓防護、快速短路防護、精確類比電流監控輸出，以及遠端過熱防護防能

使用指南: PDF | HTML
TI.com 無法提供
開發板

TPS48111Q1EVM — 適用於智慧型高壓側驅動器的 TPS48111-Q1 評估模組

TPS48111-Q1 評估模組允許評估 TPS48111-Q1 驅動器的參考電路。TPS48111-Q1 是一款 3.5-V 至 80-V 智慧型高壓側控制器，具有預充電驅動器、配備可調整斷路器計時器的二階可調式過電流防護、快速短路、精確類比電流監控輸出，以及遠端過熱防護功能。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS48110-Q1 PSpice Transient Model

SLUM845.ZIP (80 KB) - PSpice Model
下載
模擬型號

TPS48111-Q1 PSpice Transient Model (Rev. A)

SLUM817A.ZIP (130 KB) - PSpice Model
下載
計算工具

FET-INRUSH-SOA-CALC — FET SOA margin calculator for dvdt based startup

The design calculator allows user to estimate the FET SOA margin while starting up with dVdt based startup for inrush current control
支援產品和硬體

支援產品和硬體

產品
理想二極體/ORing 控制器
LM74502 — 具有負載斷開和 OVP 的 3.2-V 至 65-V 工業 RPP 控制器 LM74502-Q1 — 汽車反向極性保護控制器、過電壓保護、閘極驅動強度 60 μA LM74502H — 具有負載斷開、OVP 及高閘極驅動器的 3.2-V 至 65-V 工業 RPP 控制器 LM74502H-Q1 — 汽車反向極性保護控制器、過電壓保護、閘極驅動強度 11 mA LM74720-Q1 — 具有主動式整流與負載突降保護的車用、低 IQ 理想二極體控制器 LM74721-Q1 — 車用、無 TVS 低 IQ 反向電池保護理想二極體控制器、主動式整流 LM74722-Q1 — 具有 200-khz 主動式整流與負載突降保護的車用、低 IQ 理想二極體控制器 LM7480 — 3-V 至 65-V 背對背 NFET 理想二極體控制器、-55°C 至 125°C LM7480-Q1 — 用於驅動背對背 NFET 的 3V 至 65V、車用理想二極體控制器 LM7481 — 具有高閘極驅動器的 3-V 至 65-V 背對背 NFET 理想二極體控制器、-55°C 至 125°C LM7481-Q1 — 具有主動式整流驅動 B2B NFET 的車用理想二極體控制器
高壓側開關控制器
TPS1200-Q1 — 具有保護與診斷功能的車用 45V 低 IQ 高壓側驅動器 TPS1210-Q1 — Automotive, 45V low-Iq dual high-side driver with short circuit protection and diagnostics TPS1211-Q1 — Automotive, 3.5V to 45V high-side driver with protection and diagnostics TPS1213-Q1 — 具低功率模式和可調整短路保護的車用、45V 低 Iq 高壓側驅動器 TPS1214-Q1 — 具有低 Iq、低功率、負載喚醒、I²t 與診斷功能的車用、高壓側開關控制器 TPS4800-Q1 — 具有保護與診斷功能的車用 100V 低 IQ 高壓側驅動器 TPS4810-Q1 — 具有短路防護與診斷功能的車用 100V 低 IQ 雙高壓側驅動器 TPS4811-Q1 — Automotive, 3.5V to 100V high-side driver with protection and diagnostics TPS4813-Q1 — 具低功耗模式和可調整短路防護的車用 100V 低 IQ 高壓側驅動器
下載
計算工具

SLURB09 — TPS4811-Q1 Design Calculator

支援產品和硬體

支援產品和硬體

產品
高壓側開關控制器
TPS4811-Q1 — Automotive, 3.5V to 100V high-side driver with protection and diagnostics
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGX) 19 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片