DAC8760
- Current output: 4 mA to 20 mA; 0 mA to 20 mA; 0 mA to 24 mA
- Voltage output:
- 0 V to 5 V; 0 V to 10 V; ±5 V; ±10 V
- 0 V to 5.5 V; 0 V to 11 V; ±5.5 V; ±11 V (10% overrange)
- ±0.1% FSR total unadjusted error (TUE) maximum
- DNL: ±1 LSB maximum
- Simultaneous voltage and current output
- Internal 5-V reference (10 ppm/°C, maximum)
- Internal 4.6-V power-supply output
- Reliability features:
- CRC check and watchdog timer
- Thermal alarm
- Open alarm, short current limit
- Wide temperature range: –40°C to 125°C
- Packages: 6-mm × 6-mm 40-pin VQFN and 24-pin HTSSOP
The DACx760 are precision, fully integrated, 12-bit and 16-bit digital-to-analog converters (DACs) designed to meet the requirements of industrial process-control applications. These devices are programmable as a current output with a range of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA; or as a voltage output with a range of 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V with a 10% overrange (0 V to 5.5 V, 0 V to 11 V, ±5.5 V, or ±11 V). Both current and voltage outputs can be simultaneously enabled while being controlled by one data register.
These devices include a power-on-reset function for powering up in a known state (both IOUT and VOUT are disabled and in a Hi-Z state). The CLR and CLR-SEL pins set the voltage outputs to zero-scale or midscale, and the current output to the low end of the range if the output is enabled. Zero and gain registers can be programmed to digitally calibrate the device in the end system. The output slew rate is also programmable by register. These devices can superimpose an external HART signal on the current output, and operate with either a single 10-V to 36-V supply, or dual supplies of up to ±18 V.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DACx760 Single-Channel, 12- and 16-Bit Programmable Current and Voltage Output Digital-to-Analog Converters for 4-mA to 20-mA Current-Loop Applications datasheet (Rev. D) | PDF | HTML | 2021年 12月 7日 |
Application note | A Basic Guide to the HART Protocol | PDF | HTML | 2023年 11月 9日 | |
Application brief | Thermal Management to Increase Density in PLC AO Modules | 2018年 6月 12日 | ||
Analog Design Journal | Analog Applications Journal 4Q 2014 | 2014年 10月 24日 | ||
Analog Design Journal | SPICE models for Precision DACs | 2014年 10月 24日 | ||
Application note | Combined Voltage and Current Output with the DACx760 | 2014年 7月 24日 | ||
EVM User's guide | DACx760EMC-EVM User's Guide | 2014年 4月 24日 | ||
Application note | Implementing HART™ Communication With the DAC8760 Family | 2014年 1月 16日 | ||
EVM User's guide | DACx760EVM and DACx750EVM User's Guide (Rev. A) | 2013年 11月 21日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DAC8760EMC-EVM — DAC8760 強化評估模組
The DAC8760EMC-EVM (EMC enhanced evaluation module) provides an easy to use platform for evaluation of the performance and operating characteristics of the DAC8760 (16-bit, Voltage Output & Current Output DAC) in harsh industrial environments. The EVM is a complete evaluation kit that includes (...)
DAC8760EVM — DAC8760 16 位元可程式編輯電流/電壓輸出 DAC 評估模組
The DAC8760EVM (evaluation module) provides an easy to use platform for evaluation of the performance and operating characteristics of the DAC8760 (16-bit, Voltage Output & Current Output DAC). The EVM is a complete evaluation kit that includes a USB-based motherboard called the (...)
ANALOG-ENGINEER-CALC — 類比工程師計算機
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
支援產品和硬體
產品
系列電壓參考
精確 ADC
生物感測 AFE
整合式精密 ADC 與 DAC
高速 ADC (≥10 MSPS)
精密 DAC (≤10 MSPS)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TIDA-00760 — 適用於 PLC 且採用多工單通道 DAC 的多通道類比輸出模組參考設計
TIDA-00559 — 具有突波防護功能的組合電壓/電流輸出參考設計
TIDA-00170 — 適用於可編程邏輯控制器 (PLC) 的 16 位元類比混合輸入輸出模組參考設計
TIDA-00118 — 適用於可編程邏輯控制器 (PLC) 的 16 位元類比輸出模組參考設計
TIDA-00231 — 具輸出通道保護的 PLC 類比輸出模組專用適應型電源供應器
TIDA-00310 — 適用於智慧電網 IED 的類比輸入、輸出和繼電器驅動器輸出模組參考設計
TIPD119 — Voltage and current output terminal reference design for analog outputs in industrial applications
TIPD153 — 單通道工業電壓及電流輸出驅動器、隔離式、經 EMC/EMI 測試的參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
HTSSOP (PWP) | 24 | Ultra Librarian |
VQFN (RHA) | 40 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。