開發模組 (EVM) 的 GUI
SMART-DAC-EVM-GUI — Smart DAC and smart AFE evaluation module software
This GUI interfaces with the on board controller of the smart DAC and smart AFE EVM ecosystem.
產品規格表
DAC539G2-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T A
- Triple general-purpose inputs
- PWM output using sawtooth or triangular waveform
- 10-bit GPI-to-voltage output
- 1 LSB DNL
- Automatically detected I 2C and SPI
- 1.62-V V IH with V DD = 5.5 V
- MODE pin to select between programming and standalone modes
- User-programmable nonvolatile memory (NVM)
- Internal, external, and VDD reference
- Option for PWM-frequency-error correction
- Wide operating range
- Power supply: 1.8 V to 5.5 V
- Tiny package: 16-pin WQFN (3 mm × 3 mm)
The DAC539G2-Q1 is an application-specific, look-up table (LUT) based GPI-to-PWM converter. This device has a 10-bit GPI-to-voltage output converter and a voltage-to-PWM converter. Both these circuits can be externally connected to create a GPI-to-PWM converter. Three GPIs are mapped to eight 10-bit digital codes that represent the voltage output. There is a programmable delay at the GPIs for eliminating glitches on these inputs. The look-up table values are programmed using I 2C or SPI and stored in the NVM. The GPIs are multiplexed with the I 2C and SPI. The voltage-to-PWM converter uses a comparator with one input as a programmable sawtooth or triangle waveform and the other input as an external voltage input.
This device automatically detects I 2C and SPI and has an internal reference. The DAC539G2-Q1 is an excellent choice for fault communication in automotive stop and turn lights and similar industrial applications.
您可能會感興趣的類似產品
引腳對引腳的功能與所比較的產品相同
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DAC539G2-Q1 Automotive, 10-Bit Smart DAC for General-Purpose Input (GPI) to Pulse-Width-Modulation (PWM) Conversion With Auto-Detected I2C or SPI datasheet (Rev. A) | PDF | HTML | 2023年 9月 27日 |
| Product overview | Smart DAC Product Selection Guide | PDF | HTML | 2024年 7月 1日 | |
| Functional safety information | DAC539G2-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2023年 7月 27日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
SMARTDAC-DIY-EVM — 適用於智慧型 DAC 裝置的自製評估模組
智慧型 DAC DIY EVM 是一套額外的電路板，專為所有智慧型 DAC EVM (例如 DAC63204EVM) 的原型建構與性能評估而設計。智慧型 DAC DIY EVM 包含所有必要的工具，可直接在電路板上快速組裝系統或原型。此外，智慧型 DAC EVM 具備介接各種實驗室工具和量測系統所需的介面。
計算工具
ANALOG-ENGINEER-CALC — 類比工程師計算機
The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。