DAC60096
- High-Channel Count
- 96-Channel DAC
- Specified Monotonic to 12 Bits
- Wide, Unbuffered Output Voltage Range: ±10.5 V
- Simultaneous Update of DAC Outputs
- Clear Function
- Integrated Reference Buffers: 2.5-V Input
- Dedicated A-B Trigger Pin
- Toggle Mode Enables Square-Wave
Generation - SPI™-Compatible Serial Interface
- 4-Wire Mode, 3-V to 5.5-V Operation
- Low Power: 440-mW Typical Operation
- Operating Temperature Range: –40°C to +85°C
- 196-Ball, 15-mm × 15-mm NFBGA, 1-mm Pitch
- Toggle Mode Enables Square-Wave
The DAC60096 is a low-power, fast-settling, 96-channel, 12-bit, digital to analog converter (DAC). The device provides ±10.5-V unbuffered, bipolar voltage outputs. The DAC60096 high-channel count, low-power operation, and good linearity make it an ideal solution in systems where a very high number of precise analog outputs is required.
Communication to the device is performed through a high-speed, 4-wire, serial interface compatible with industry standard microprocessors and microcontrollers.
The DAC60096 can be set up to clear or update all DACs simultaneously. In addition, a versatile external conversion trigger allows each DAC channel to operate as a square-wave generator with independent amplitude control.
The DAC60096 is characterized for operation over the temperature range of –40°C to +85°C, and is available in a 196-ball, 15-mm × 15-mm, 1-mm pitch, BGA package.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DAC60096 96-Channel, 12-Bit, Low-Power, Serial-Input, High-Voltage Output DAC with Conversion Trigger datasheet (Rev. A) | PDF | HTML | 2016年 1月 22日 |
EVM User's guide | DAC60096EVM User's Guide | 2015年 11月 24日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ANALOG-ENGINEER-CALC — 類比工程師計算機
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
NFBGA (ZEB) | 196 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。