DLPC8445
DLP display controller for DLP472TP (0.47-inch 4K) DMD
DLPC8445
- DLPC8445 controller using the DLP472TP digital micromirror device (DMD) supports
- Up to 4K UHD at 60Hz
- Up to 1080p at 240Hz (2D) and 120Hz (3D)
- Provides single V-by-One HS video input port with one, two, four, or eight lanes
- Up to 600MHz Pixel clock support
- Up to 3.0Gbps per input transmission rate
- Input formats supported
- RGB and YCbCr
- 4:4:4, 4:2:2
- Internal Arm processor
- 52 configurable GPIOs
- PWM generator
- Capture and delay timers
- USB 2.0 high-speed controller
- SPI controllers
- I2C controllers
- UART and interrupt controllers
- Warping engine
- 1D, 2D, and 3D keystone correction
- Warping (multipoint manual warp and full warp map access 32 × 18 uniformly sampled points)
- Embedded partial frame memory for video processing
- Additional image processing
- DynamicBlack
- HDR10 (PQ and HLG) support
- Frame rate multiplication
- Color coordinate adjustment
- White color temperature adjustment
- Programmable degamma
- Read-side spatial-temporal multiplexing
- Integrated support for 3-D display
- Rolling Buffer for reduced frame latency
- Splash screen display
- Serial flash for µP and PWM sequences
- System control
- DMD power and reset driver control
- DMD horizontal and vertical image flip
- JTAG boundary scan test support
- Supports LED based projector systems
The DLPC8445 is a digital display controller for the TI DLP Products 4K UHD display chipset. The display controller, together with the DLP472TP DMD and the DLPA3085 power management integrated circuit, comprise the chipset. This solution fits display systems that require high resolution and high brightness in a small form factor. For reliable operation, the DLPC8445 display controller must always be used with the DLP472TP DMD and the DLPA3085 PMIC per application.
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | DLPC8445 High Resolution Controller datasheet | PDF | HTML | 07 Mai 2024 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
FCCSP (AMD) | 484 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.