首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS131E08S

現行

具快速啓動功能且適用監控和保護的 24 位元 64-kSPS 8 通道同步 ΔΣ ADC

立即訂購
產品規格表

ADS131E08S

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 24 Sample rate (max) (ksps) 64 Number of input channels 8 Interface type SPI Architecture Delta-Sigma Input type Differential, Pseudo-Differential Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode Internal Input voltage range (max) (V) 4 Input voltage range (min) (V) 0 Features Daisy-Chainable, GPIO, Oscillator, PGA Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 2 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.25 SNR (dB) 108 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
Resolution (Bits) 24 Sample rate (max) (ksps) 64 Number of input channels 8 Interface type SPI Architecture Delta-Sigma Input type Differential, Pseudo-Differential Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode Internal Input voltage range (max) (V) 4 Input voltage range (min) (V) 0 Features Daisy-Chainable, GPIO, Oscillator, PGA Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 2 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.25 SNR (dB) 108 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
TQFP (PAG) 64 144 mm² 12 x 12
  • Power-up time: 3 ms
  • Eight differential simultaneous sampling inputs
  • High performance:
    • Dynamic range at 1 kSPS: 118 dB
    • Crosstalk: –125 dB
    • THD: –100 dB at 50 Hz and 60 Hz
  • Low power consumption: 2 mW/channel
  • Data rates: 1, 2, 4, 8, 16, 32, and 64 kSPS
  • Gain options: 1, 2, 4, 8, and 12
  • Internal voltage reference: 8 ppm/°C Drift
  • Supply range:
    • Analog:
      • 2.7 V to 5.25 V (unipolar)
      • ±2.5 V (bipolar)
    • Digital: 1.7 V to 3.6 V
  • Fault detection and device self-testing capability
  • SPI™-compatible data interface and four GPIOs
  • Package: 64-pin TQFP
  • Operating temperature range: –40°C to +105°C
  • Power-up time: 3 ms
  • Eight differential simultaneous sampling inputs
  • High performance:
    • Dynamic range at 1 kSPS: 118 dB
    • Crosstalk: –125 dB
    • THD: –100 dB at 50 Hz and 60 Hz
  • Low power consumption: 2 mW/channel
  • Data rates: 1, 2, 4, 8, 16, 32, and 64 kSPS
  • Gain options: 1, 2, 4, 8, and 12
  • Internal voltage reference: 8 ppm/°C Drift
  • Supply range:
    • Analog:
      • 2.7 V to 5.25 V (unipolar)
      • ±2.5 V (bipolar)
    • Digital: 1.7 V to 3.6 V
  • Fault detection and device self-testing capability
  • SPI™-compatible data interface and four GPIOs
  • Package: 64-pin TQFP
  • Operating temperature range: –40°C to +105°C

The ADS131E08S is a multichannel, simultaneous sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) with built-in programmable gain amplifiers (PGAs), an internal reference, and an internal oscillator. The ADC wide dynamic range, scalable data rates, and internal fault detect monitors make the ADS131E08S very attractive in industrial power monitoring, control, and protection applications. Fast power-up time allows data to be available within 3 ms of power being applied to the device for line-powered power applications. True high-impedance inputs enable the ADS131E08S to directly interface with a resistor-divider network or a voltage transformer to measure line voltage, or a current transformer or Rogowski coil to measure line current. With high integration levels and exceptional performance, the ADS131E08S enables the creation of scalable industrial power systems at a significantly reduced size, power, and overall cost.

The ADS131E08S has an individual input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and fault detection. Fault detection can be implemented internal to the device, using the integrated comparators with digital-to-analog converter (DAC)-controlled trigger levels. The ADS131E08S can operate at data rates as high as 64 kSPS.

The complete analog front-end (AFE) solution is available in a 64-pin TQFP package and is specified over the industrial temperature range of –40°C to +105°C.

The ADS131E08S is a multichannel, simultaneous sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) with built-in programmable gain amplifiers (PGAs), an internal reference, and an internal oscillator. The ADC wide dynamic range, scalable data rates, and internal fault detect monitors make the ADS131E08S very attractive in industrial power monitoring, control, and protection applications. Fast power-up time allows data to be available within 3 ms of power being applied to the device for line-powered power applications. True high-impedance inputs enable the ADS131E08S to directly interface with a resistor-divider network or a voltage transformer to measure line voltage, or a current transformer or Rogowski coil to measure line current. With high integration levels and exceptional performance, the ADS131E08S enables the creation of scalable industrial power systems at a significantly reduced size, power, and overall cost.

The ADS131E08S has an individual input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and fault detection. Fault detection can be implemented internal to the device, using the integrated comparators with digital-to-analog converter (DAC)-controlled trigger levels. The ADS131E08S can operate at data rates as high as 64 kSPS.

The complete analog front-end (AFE) solution is available in a 64-pin TQFP package and is specified over the industrial temperature range of –40°C to +105°C.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
ADS131E08 現行 適用電源監控和保護的 24 位元 64-kSPS 8 通道同步取樣 ΔΣ ADC External reference option

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 日期
* Data sheet ADS131E08S Eight-Channel, 24-Bit, Analog Front-End With Fast Power-Up Time datasheet (Rev. B) PDF | HTML 2020年 4月 6日
Application note A Basic Guide to Bridge Measurements (Rev. A) PDF | HTML 2024年 3月 13日
Application note Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023年 3月 29日
E-book Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020年 6月 19日
Technical article What’s the big deal about circuit breakers? PDF | HTML 2017年 8月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS131E08EVM-PDK — ADS131E08V2EVM-PDK 評估模組

ADS131E08EVM-PDK 為 ADS131E08 的示範套件，ADS131E08 是同步採樣、24 位元、ΔΣ (Δ Σ) 類比數位轉換器 (ADC)，內建可編程增益放大器 (PGA)、內部參考和板上振盪器。ADS131E08 包含工業電源監控和控制所需的常用功能，但可彈性滿足需要八通道、24 位元 ADC 的各種應用。ADS131E08EVM-PDK 展示套件設計用於加速評估和系統開發。

 

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

ADS131E08 IBIS Model

SBAM160.ZIP (141 KB) - IBIS Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-00661 — 適用於空氣斷路器的高解析度、快速啟動類比前端參考設計

TIDA-00661 參考設計具備訊號處理前端子系統，適用於空氣斷路器 (ACB) 或模製外殼斷路器 (MCCB) 中使用的電子跳脫裝置 (ETU)。此子系統由具有 24 位元解析度和快速啟動 (< 3ms)、±2.5V 穩壓器、FRAM 架構微控制器 (MCU) 的 Delta-Sigma ADC 組成，用於介接 ADC 和處理輸入。子系統的設計用途為啟動、計算全週期 RMS 電流、做出決策，並在 30 ms 內為電磁閥提供跳脫訊號。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00835 — 採用 24 位元 Delta-Sigma ADC 的高準確度 ±0.5% 電流和隔離式電壓量測參考設計

TIDA-00835 參考設計採用雙極輸入配置，結合具有四通道、24 位元同時取樣差動輸入的 ΔΣ ADC，在寬動態範圍內進行精確的電壓和電流測量。配置 ADC 來測量 ±2.5V 雙極輸入。  使用固定增益放大器，將輸入調整至 ±2.5V 的 ADC 測量範圍。此 AFE 使用通用外部時脈將兩個 ADC 串接在一起，將輸入通道數量擴充至八個，並同時取樣所有輸入通道。每個模組擁有更多測量通道，可降低整體系統成本。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TQFP (PAG) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片