首頁 放大器 電流感測放大器 類比電流感測放大器
首頁
放大器
電流感測放大器
類比電流感測放大器

INA301-Q1

現行

具比較器的 AEC-Q100、36V、550kHz、4V/µs、高精度電流感測放大器

立即訂購
產品規格表

INA301-Q1

現行
產品規格表 立即訂購

產品詳細資料

Product type Analog output with integrated comparator Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 35, 50, 125 Input offset drift (±) (typ) (µV/°C) 0.1 Features Alert Function, High precision, Low-side Capable Rating Automotive Voltage gain (V/V) 20, 50, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 450, 500, 550 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 0.7 Number of channels 1 Comparators (#) 1 Gain error (%) 0.1, 0.15, 0.2 Gain error drift (±) (max) (ppm/°C) 10 Slew rate (V/µs) 4 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
Product type Analog output with integrated comparator Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 35, 50, 125 Input offset drift (±) (typ) (µV/°C) 0.1 Features Alert Function, High precision, Low-side Capable Rating Automotive Voltage gain (V/V) 20, 50, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 450, 500, 550 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 0.7 Number of channels 1 Comparators (#) 1 Gain error (%) 0.1, 0.15, 0.2 Gain error drift (±) (max) (ppm/°C) 10 Slew rate (V/µs) 4 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C6
  • Functional Safety-Capable
  • Wide common-mode input range: 0 V to 36 V
  • Dual output: amplifier and comparator output
  • High accuracy amplifier:
    • Offset voltage: 35 µV (maximum)
    • Offset voltage drift: 0.5 µV/°C (maximum)
    • Gain error: 0.1% (maximum)
    • Gain error drift: 10 ppm/°C
  • Available amplifier gains:
    • INA301A1-Q1: 20 V/V
    • INA301A2-Q1: 50 V/V
    • INA301A3-Q1: 100 V/V
  • Programmable alert threshold set through a single resistor
  • Total alert response time: 1 µs
  • Open-drain output with both transparent and latching modes
  • Package: VSSOP-8
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C6
  • Functional Safety-Capable
  • Wide common-mode input range: 0 V to 36 V
  • Dual output: amplifier and comparator output
  • High accuracy amplifier:
    • Offset voltage: 35 µV (maximum)
    • Offset voltage drift: 0.5 µV/°C (maximum)
    • Gain error: 0.1% (maximum)
    • Gain error drift: 10 ppm/°C
  • Available amplifier gains:
    • INA301A1-Q1: 20 V/V
    • INA301A2-Q1: 50 V/V
    • INA301A3-Q1: 100 V/V
  • Programmable alert threshold set through a single resistor
  • Total alert response time: 1 µs
  • Open-drain output with both transparent and latching modes
  • Package: VSSOP-8

The INA301-Q1 includes both a high common-mode, current-sensing amplifier and a high-speed comparator configured to provide overcurrent protection by measuring the voltage developed across a current-sensing or current-shunt resistor and comparing that voltage to a defined threshold limit. This device features an adjustable limit-threshold range that is set using a single external limit-setting resistor. This current-shunt monitor measures differential voltage signals on common-mode voltages that can vary from 0 V up to 36 V, independent of the supply voltage.

The open-drain alert output can be configured to operate in either a transparent mode, where the output status follows the input state, or in a latched mode, where the alert output is cleared when the latch is reset. The device alert response time is under 1 µs, allowing for quick detection of overcurrent events.

This device operates from a single 2.7-V to 5.5-V supply, drawing a maximum supply current of 700 µA. The device is specified over the extended operating temperature range of –40°C to +125°C, and is available in an 8-pin VSSOP package.

The INA301-Q1 includes both a high common-mode, current-sensing amplifier and a high-speed comparator configured to provide overcurrent protection by measuring the voltage developed across a current-sensing or current-shunt resistor and comparing that voltage to a defined threshold limit. This device features an adjustable limit-threshold range that is set using a single external limit-setting resistor. This current-shunt monitor measures differential voltage signals on common-mode voltages that can vary from 0 V up to 36 V, independent of the supply voltage.

The open-drain alert output can be configured to operate in either a transparent mode, where the output status follows the input state, or in a latched mode, where the alert output is cleared when the latch is reset. The device alert response time is under 1 µs, allowing for quick detection of overcurrent events.

This device operates from a single 2.7-V to 5.5-V supply, drawing a maximum supply current of 700 µA. The device is specified over the extended operating temperature range of –40°C to +125°C, and is available in an 8-pin VSSOP package.
filter 尋找其它 類比電流感測放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
INA300-Q1 現行 AEC-Q100、36V 電流感測比較器 The INA300-Q1 offers only an ALERT signal
INA302-Q1 現行 具雙比較器的 AEC-Q100、36V、雙向、550kHz、4V/µs、高精度電流感測放大器 The INA302-Q1 has dual integrated comparators
INA303-Q1 現行 具有窗口比較器的 AEC-Q100、36V、雙向、550 kHz、4V/µs、高精度電流感測放大器 The INA303-Q1 has window comparotor functionality
INA381-Q1 現行 具有整合式過電流比較器的 AEC-Q100、26-V、350-kHz 電流感測放大器 The INA381-Q1 has similar functionality with lower perfomance at a lower price.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 17
重要文件 類型 標題 格式選項 日期
* Data sheet INA301-Q1 36-V, Automotive, High-Speed, Zero-Drift, Voltage-Output Current-Shunt Monitor With High-Speed, Overcurrent Protection Comparator datasheet (Rev. B) PDF | HTML 2022年 4月 1日
Application note Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 2024年 11月 18日
Application brief Integrating the Current Sensing Resistor (Rev. D) PDF | HTML 2023年 4月 7日
Application brief Precision Current Measurements on High-Voltage Power-Supply Rails (Rev. F) PDF | HTML 2022年 10月 17日
Application brief Measuring Current To Detect Out-of-Range Conditions (Rev. D) PDF | HTML 2022年 3月 10日
Application note Using a PCB Copper Trace as a Current-Sense Shunt Resistor PDF | HTML 2022年 1月 25日
Functional safety information INA301-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021年 10月 11日
Application brief Measuring Current for Handle Multiple Out-of-Range Conditions (Rev. C) PDF | HTML 2021年 10月 4日
Application brief Integrating the Current Sensing Signal Path (Rev. B) PDF | HTML 2021年 9月 29日
Selection guide Current Sense Amplifiers (Rev. E) 2021年 9月 20日
Application brief High-Side Motor Current Monitoring for Over-Current Protection (Rev. B) PDF | HTML 2021年 2月 23日
Technical article Use fast, precise overcurrent detection to enable diagnostics in automotive safety PDF | HTML 2019年 6月 24日
Application brief Bidirectional, Low-Side Phase Current Sensing With Onboard Overcurrent Detection (Rev. D) 2019年 3月 6日
Application brief External current sense amps vs integrated onboard amplifiers for current sensing (Rev. B) 2019年 2月 19日
Circuit design Overcurrent event detection circuit 2018年 7月 31日
Application brief Low-Drift, Low-Side Current Measurements for Three-Phase Systems (Rev. B) 2017年 9月 5日
White paper Overcurrent protection enables more efficient and reliable systems 2016年 5月 16日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA301EVM — INA301 評估模組

Three different gain devices in the same EVM package, which enables the custome quickly setup and evaluate any or all the devices as desired.

使用指南: PDF
TI.com 無法提供
模擬型號

INA301 PSpice Model

SBOMA60.ZIP (71 KB) - PSpice Model
下載
模擬型號

INA301 TINA-TI Reference Design (Rev. A)

SBOM959A.TSC (468 KB) - TINA-TI Reference Design
下載
模擬型號

INA301 TINA-TI Spice Model (Rev. A)

SBOM960A.ZIP (22 KB) - TINA-TI Spice Model
下載
模擬型號

INA301A1 PSpice Model

SBOMBH1.ZIP (28 KB) - PSpice Model
下載
模擬型號

INA301A2 PSpice Model

SBOMBF4.ZIP (27 KB) - PSpice Model
下載
模擬型號

INA301A3 PSpice Model

SBOMBH2.ZIP (28 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
計算工具

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

This Excel calculator provides a comparison between two and five of our standard current sense amplifiers, delivering a chart containing the basic parameters of each device. This calculator also takes system condition inputs from users such as common-mode voltage, supply voltage, shunt resistor (...)
支援產品和硬體

支援產品和硬體
下載
設計工具

CIRCUIT060035 — 具有窗型比較器電路的雙向電流感測

此雙向電流感測解決方案採用電流感測放大器與高速雙比較器，並具備軌對軌輸入共模範圍，可在比較器輸出 (OUTA 和 OUTB) 處建立過電流 (OC) 警示訊號，如果輸入電流 (IG1) 高於 100 A 或降至 -35 A 以下。在此實作中，兩個過電流警示訊號都是高電位作動，因此當超過 100 A 或 -35 A 閾值時，比較器輸出將會變高。在兩個比較器上實作外部磁滯，因此當電流降低 10% (90 A 和 -31 A) 時，比較器輸出將回到邏輯低狀態。雖然下方電路將分流電阻器 R8 連接至接地，但相同的電路仍適用於高壓側電流感測，最高可達 INA 的共模電壓範圍。
View Options
設計工具

CIRCUIT060037 — 精密過電流閂鎖電路

這個高壓側電流感測解決方案採用電流感測放大器、含整合式參考的比較器以及 P 通道 MOSFET，以建立過電流閂鎖電路。當偵測到負載電流大於 200 mA 時，電路會中斷系統與電源的連接。比較器輸出將閂鎖 (將 P 通道 MOSFET 的閘極電壓保持在 0 V)，直到電路的電源開始循環，因為比較器會驅動 P 通道 MOSFET 的閘極，並將訊號傳送回電流感測放大器的參考針腳。
View Options
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-00302 — 具瞬態穩定性的電流分流監控器參考設計

This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.

Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)

Design guide: PDF
電路圖: PDF
參考設計

TIDA-01543 — 具有過電流偵測且適用於牽引逆變器的隔離式電流感測參考設計 (±300 A)

此 參考設計可偵測牽引馬達相位電流。TIDA-01543 實現隔離式電流感測器。透過 AMC1305M05-Q1 ΔΣ 調變器和 INA301-Q1 裝置，可實現精密的直列式分流馬達相位電流感測。調變器的高 CMTI 有助於抑制逆變器切換暫態，以免損毀控制器端的資料。INA301-Q1 的快速反應時間可加快過電流事件的反應時間。TIDA-01543 提供的介面能夠連接外部 MCU，可在其中執行數位 SINC 濾波器，以解調 AMC1305M05 輸出位元流。此 參考設計採用 C2000 系列，亦即符合車用資格的 F280049M Piccolo™ 微控制器控制卡。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGK) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片